Package: iputils-ping
Status: install ok installed
Priority: important
Section: net
Installed-Size: 98
Maintainer: Noah Meyerhans <noahm@debian.org>
Architecture: armhf
Source: iputils
Version: 3:20161105-1
Provides: ping
Depends: libc6 (>= 2.11), libcap2 (>= 1:2.10), libidn11 (>= 1.13), libnettle6
Recommends: libcap2-bin
Description: Tools to test the reachability of network hosts
 The ping command sends ICMP ECHO_REQUEST packets to a host in order to
 test if the host is reachable via the network.
 .
 This package includes a ping6 utility which supports IPv6 network
 connections.

Package: libpam-runtime
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 1016
Maintainer: Steve Langasek <vorlon@debian.org>
Architecture: all
Multi-Arch: foreign
Source: pam
Version: 1.1.8-3.6
Replaces: libpam0g-dev, libpam0g-util
Depends: debconf (>= 0.5) | debconf-2.0, debconf (>= 1.5.19) | cdebconf, libpam-modules (>= 1.0.1-6)
Conflicts: libpam0g-util
Conffiles:
 /etc/pam.conf 87fc76f18e98ee7d3848f6b81b3391e5
 /etc/pam.d/other 31aa7f2181889ffb00b87df4126d1701
Description: Runtime support for the PAM library
 Contains configuration files and  directories required for
 authentication  to work on Debian systems.  This package is required
 on almost all installations.
Homepage: http://www.linux-pam.org/

Package: libncurses5
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 184
Maintainer: Craig Small <csmall@debian.org>
Architecture: armhf
Multi-Arch: same
Source: ncurses
Version: 6.0+20161126-1+deb9u2
Depends: libtinfo5 (= 6.0+20161126-1+deb9u2), libc6 (>= 2.4)
Recommends: libgpm2
Description: shared libraries for terminal handling
 The ncurses library routines are a terminal-independent method of
 updating character screens with reasonable optimization.
 .
 This package contains the shared libraries necessary to run programs
 compiled with ncurses.
Homepage: http://invisible-island.net/ncurses/

Package: libcom-err2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 84
Maintainer: Theodore Y. Ts'o <tytso@mit.edu>
Architecture: armhf
Multi-Arch: same
Source: e2fsprogs
Version: 1.44.5-1~bpo9+1
Replaces: libcomerr2 (<< 1.43.9-1~)
Provides: libcomerr2 (= 1.44.5-1~bpo9+1)
Depends: libc6 (>= 2.17)
Breaks: libcomerr2 (<< 1.43.9-1~)
Description: common error description library
 libcomerr is an attempt to present a common error-handling mechanism to
 manipulate the most common form of error code in a fashion that does not
 have the problems identified with mechanisms commonly in use.
Homepage: http://e2fsprogs.sourceforge.net

Package: libjs-jquery
Status: install ok installed
Priority: optional
Section: web
Installed-Size: 551
Maintainer: Debian Javascript Maintainers <pkg-javascript-devel@lists.alioth.debian.org>
Architecture: all
Multi-Arch: foreign
Source: jquery
Version: 3.1.1-2
Replaces: jquery
Recommends: javascript-common
Breaks: movabletype-opensource (<< 5.1.4+dfsg-3~)
Conflicts: jquery
Description: JavaScript library for dynamic web applications
 jQuery is a fast, concise, JavaScript Library that simplifies how you
 traverse HTML documents, handle events, perform animations, and add Ajax
 interactions to your web pages. jQuery is designed to change the way
 that you write JavaScript.
Homepage: http://jquery.com/

Package: dmeventd
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 136
Maintainer: Debian LVM Team <pkg-lvm-maintainers@lists.alioth.debian.org>
Architecture: armhf
Source: lvm2 (2.02.168-2)
Version: 2:1.02.137-2
Depends: libc6 (>= 2.15), libdevmapper-event1.02.1 (>= 2:1.02.110), libdevmapper1.02.1 (>= 2:1.02.113), liblvm2cmd2.02 (>= 2.02.168), init-system-helpers (>= 1.18~)
Description: Linux Kernel Device Mapper event daemon
 The Linux Kernel Device Mapper is the LVM (Linux Logical Volume Management)
 Team's implementation of a minimalistic kernel-space driver that handles
 volume management, while keeping knowledge of the underlying device layout
 in user-space.  This makes it useful for not only LVM, but software raid,
 and other drivers that create "virtual" block devices.
 .
 This package contains a daemon to monitor events of devmapper devices.
Homepage: http://sources.redhat.com/lvm2/

Package: libapt-pkg5.0
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 2405
Maintainer: APT Development Team <deity@lists.debian.org>
Architecture: armhf
Multi-Arch: same
Source: apt
Version: 1.4.8
Provides: libapt-pkg (= 1.4.8)
Depends: libbz2-1.0, libc6 (>= 2.15), libgcc1 (>= 1:3.5), liblz4-1 (>= 0.0~r127), liblzma5 (>= 5.1.1alpha+20120614), libstdc++6 (>= 5.2), zlib1g (>= 1:1.2.3.4)
Recommends: apt (>= 1.4.8)
Breaks: appstream (<< 0.9.0-3~), apt (<< 1.1~exp14), libapt-inst1.5 (<< 0.9.9~)
Description: package management runtime library
 This library provides the common functionality for searching and
 managing packages as well as information about packages.
 Higher-level package managers can depend upon this library.
 .
 This includes:
  * retrieval of information about packages from multiple sources
  * retrieval of packages and all dependent packages
    needed to satisfy a request either through an internal
    solver or by interfacing with an external one
  * authenticating the sources and validating the retrieved data
  * installation and removal of packages in the system
  * providing different transports to retrieve data over cdrom, ftp,
    http, rsh as well as an interface to add more transports like
    https (apt-transport-https) and debtorrent (apt-transport-debtorrent).

Package: libaudit1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 134
Maintainer: Laurent Bigonville <bigon@debian.org>
Architecture: armhf
Multi-Arch: same
Source: audit
Version: 1:2.6.7-2
Depends: libaudit-common (>= 1:2.6.7-2), libc6 (>= 2.8), libcap-ng0
Description: Dynamic library for security auditing
 The audit-libs package contains the dynamic libraries needed for
 applications to use the audit framework. It is used to monitor systems for
 security related events.
Homepage: https://people.redhat.com/sgrubb/audit/

Package: readline-common
Status: install ok installed
Priority: important
Section: utils
Installed-Size: 89
Maintainer: Matthias Klose <doko@debian.org>
Architecture: all
Multi-Arch: foreign
Source: readline
Version: 7.0-3
Replaces: libreadline-common, libreadline4 (<< 4.3-16), libreadline5 (<< 5.0-11)
Depends: dpkg (>= 1.15.4) | install-info
Suggests: readline-doc
Conflicts: libreadline-common, libreadline5 (<< 5.0-11)
Description: GNU readline and history libraries, common files
 The GNU readline library aids in the consistency of user interface
 across discrete programs that need to provide a command line
 interface.
 .
 The GNU history library provides a consistent user interface for
 recalling lines of previously typed input.

Package: makedev
Status: install ok installed
Priority: extra
Section: admin
Installed-Size: 126
Maintainer: Debian QA Group <packages@qa.debian.org>
Architecture: all
Multi-Arch: foreign
Version: 2.3.1-93
Depends: base-passwd (>= 3.0.4)
Conflicts: udev (<= 0.024-7)
Description: creates device files in /dev
 The MAKEDEV executable is used to create device files, often in /dev.
 .
 Device files are special files through which applications can interact
 with hardware.
 .
 This package is not necessary for most modern Linux systems, where the udev
 subsystem provides a more dynamic mechanism for device file management.

Package: perl-modules-5.24
Status: install ok installed
Priority: standard
Section: perl
Installed-Size: 17630
Maintainer: Niko Tyni <ntyni@debian.org>
Architecture: all
Multi-Arch: foreign
Source: perl
Version: 5.24.1-3+deb9u4
Replaces: libansicolor-perl (<< 4.04), libarchive-tar-perl (<< 2.04.01), libattribute-handlers-perl (<< 0.99), libautodie-perl (<< 2.29-2), libcpan-meta-perl (<< 2.150005), libcpan-meta-requirements-perl (<< 2.140), libcpan-meta-yaml-perl (<< 0.018), libdigest-perl (<< 1.17.01), libexperimental-perl (<< 0.016), libextutils-cbuilder-perl (<< 0.280225), libextutils-command-perl (<< 7.10.02), libextutils-install-perl (<< 2.04), libextutils-parsexs-perl (<< 3.310000), libfile-spec-perl (<< 3.6301), libhttp-tiny-perl (<< 0.056.001), libi18n-langtags-perl (<< 0.40), libio-zlib-perl (<< 1.10), libjson-pp-perl (<< 2.27300.01), liblocale-codes-perl (<< 3.37), liblocale-maketext-perl (<< 1.26.01), liblocale-maketext-simple-perl (<< 0.21.01), libmath-bigint-perl (<< 1.999715), libmath-complex-perl (<< 1.59), libmodule-corelist-perl (<< 5.20170114.24), libmodule-load-conditional-perl (<< 0.64), libmodule-load-perl (<< 0.32), libmodule-metadata-perl (<< 1.000031), libnet-perl, libnet-ping-perl (<< 2.43.01), libpackage-constants-perl, libparams-check-perl (<< 0.38), libparent-perl (<< 0.234), libparse-cpan-meta-perl (<< 1.4417.001), libperl-ostype-perl (<< 1.009), libpod-escapes-perl (<< 1.07), libpod-parser-perl (<< 1.63), libpod-simple-perl (<< 3.32), libtest-harness-perl (<< 3.36.01), libtest-simple-perl (<< 1.001014), libtest-tester-perl (<< 0.114), libtest-use-ok-perl (<< 0.16), libthread-queue-perl (<< 3.09), libtime-local-perl (<< 1.2300), libunicode-collate-perl (<< 1.14), libversion-perl (<< 1:0.9916), libversion-requirements-perl, perl-base (<< 5.22.0~), perl-modules, podlators-perl
Provides: libansicolor-perl, libarchive-tar-perl, libattribute-handlers-perl, libautodie-perl, libcpan-meta-perl, libcpan-meta-requirements-perl, libcpan-meta-yaml-perl, libdigest-perl, libexperimental-perl, libextutils-cbuilder-perl, libextutils-command-perl, libextutils-install-perl, libextutils-parsexs-perl, libfile-spec-perl, libhttp-tiny-perl, libi18n-langtags-perl, libio-zlib-perl, libjson-pp-perl, liblocale-codes-perl, liblocale-maketext-perl, liblocale-maketext-simple-perl, libmath-bigint-perl, libmath-complex-perl, libmodule-corelist-perl, libmodule-load-conditional-perl, libmodule-load-perl, libmodule-metadata-perl, libnet-perl, libnet-ping-perl, libparams-check-perl, libparent-perl, libparse-cpan-meta-perl, libperl-ostype-perl, libpod-escapes-perl, libpod-parser-perl, libpod-simple-perl, libtest-harness-perl, libtest-simple-perl, libtest-tester-perl, libtest-use-ok-perl, libthread-queue-perl, libtime-local-perl, libunicode-collate-perl, libversion-perl, libversion-requirements-perl, perl-modules, podlators-perl
Depends: perl-base (>= 5.24.1-1)
Pre-Depends: dpkg (>= 1.17.17)
Recommends: perl (>= 5.24.1-1)
Breaks: cli-common (<< 0.9+nmu1), libansicolor-perl (<< 4.04), libarchive-tar-perl (<< 2.04.01), libattribute-handlers-perl (<< 0.99), libautodie-perl (<< 2.29-2), libcpan-meta-perl (<< 2.150005), libcpan-meta-requirements-perl (<< 2.140), libcpan-meta-yaml-perl (<< 0.018), libdigest-perl (<< 1.17.01), libexperimental-perl (<< 0.016), libextutils-cbuilder-perl (<< 0.280225), libextutils-command-perl (<< 7.10.02), libextutils-install-perl (<< 2.04), libextutils-parsexs-perl (<< 3.310000), libfile-spec-perl (<< 3.6301), libhttp-tiny-perl (<< 0.056.001), libi18n-langtags-perl (<< 0.40), libio-zlib-perl (<< 1.10), libjson-pp-perl (<< 2.27300.01), liblocale-codes-perl (<< 3.37), liblocale-maketext-perl (<< 1.26.01), liblocale-maketext-simple-perl (<< 0.21.01), libmath-bigint-perl (<< 1.999715), libmath-complex-perl (<< 1.59), libmodule-corelist-perl (<< 5.20170114.24), libmodule-load-conditional-perl (<< 0.64), libmodule-load-perl (<< 0.32), libmodule-metadata-perl (<< 1.000031), libnet-perl (<= 1:1.22), libnet-ping-perl (<< 2.43.01), libparams-check-perl (<< 0.38), libparent-perl (<< 0.234), libparse-cpan-meta-perl (<< 1.4417.001), libperl-ostype-perl (<< 1.009), libpod-escapes-perl (<< 1.07), libpod-parser-perl (<< 1.63), libpod-simple-perl (<< 3.32), libtest-harness-perl (<< 3.36.01), libtest-simple-perl (<< 1.001014), libtest-tester-perl (<< 0.114), libtest-use-ok-perl (<< 0.16), libthread-queue-perl (<< 3.09), libtime-local-perl (<< 1.2300), libunicode-collate-perl (<< 1.14), libversion-perl (<< 1:0.9916), libversion-requirements-perl (<< 0.101022), maildirsync (<< 1.2-2.1), mono-apache-server2 (<< 3.8-2.1), mono-apache-server4 (<< 3.8-2.1), mono-fastcgi-server2 (<< 3.8-2.1), mono-fastcgi-server4 (<< 3.8-2.1), patcher (<< 0.0.20040521-6.1), pdl (<< 1:2.007-4), perl (<< 5.24.1~), podlators-perl (<< 2.3.1), polygen-data (<< 1.0.6.ds2-13.1), pristine-tar (<< 1.33), pure-ftpd-common (<< 1.0.36-3.2), rinse (<< 3.0.7), shorewall (<< 4.6.4.3-2), shorewall-core (<< 4.6.4.3-2), tvtime (<< 1.0.2-14)
Conflicts: defoma (<< 0.11.12), mono-gac (<< 2.10.8.1-3), perl-modules (<< 5.22.0~)
Description: Core Perl modules
 Architecture independent Perl modules.  These modules are part of Perl and
 required if the `perl' package is installed.
 .
 Note that this package only exists to save archive space and should be
 considered an internal implementation detail of the `perl' package.
 Other packages should not depend on `perl-modules-5.24' directly, they
 should use `perl' (which depends on `perl-modules-5.24') instead.
Homepage: http://dev.perl.org/perl5/

Package: libtinfo5
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 400
Maintainer: Craig Small <csmall@debian.org>
Architecture: armhf
Multi-Arch: same
Source: ncurses
Version: 6.0+20161126-1+deb9u2
Replaces: libncurses5 (<< 5.9-3)
Depends: libc6 (>= 2.16)
Breaks: dialog (<< 1.2-20130523)
Description: shared low-level terminfo library for terminal handling
 The ncurses library routines are a terminal-independent method of
 updating character screens with reasonable optimization.
 .
 This package contains the shared low-level terminfo library.
Homepage: http://invisible-island.net/ncurses/

Package: libgdbm3
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 59
Maintainer: Debian QA Group <packages@qa.debian.org>
Architecture: armhf
Multi-Arch: same
Source: gdbm
Version: 1.8.3-14
Depends: libc6 (>= 2.4), dpkg (>= 1.15.4) | install-info
Description: GNU dbm database routines (runtime version)
 GNU dbm ('gdbm') is a library of database functions that use extendible
 hashing and works similarly to the standard UNIX 'dbm' functions.
 .
 The basic use of 'gdbm' is to store key/data pairs in a data file, thus
 providing a persistent version of the 'dictionary' Abstract Data Type
 ('hash' to perl programmers).
Homepage: http://directory.fsf.org/project/gdbm/

Package: perl-base
Essential: yes
Status: install ok installed
Priority: required
Section: perl
Installed-Size: 6010
Maintainer: Niko Tyni <ntyni@debian.org>
Architecture: armhf
Source: perl
Version: 5.24.1-3+deb9u4
Replaces: libfile-path-perl (<< 2.12.01), libfile-temp-perl (<< 0.2304), libio-socket-ip-perl (<< 0.37), libscalar-list-utils-perl (<< 1:1.42.02), libsocket-perl (<< 2.020.03), libxsloader-perl (<< 0.22), perl (<< 5.10.1-12), perl-modules (<< 5.20.1-3)
Provides: libfile-path-perl, libfile-temp-perl, libio-socket-ip-perl, libscalar-list-utils-perl, libsocket-perl, libxsloader-perl, perlapi-5.24.1
Pre-Depends: libc6 (>= 2.23), dpkg (>= 1.17.17)
Suggests: perl
Breaks: amanda-common (<< 1:3.3.9-2), autoconf2.13 (<< 2.13-45), backuppc (<< 3.3.1-2), dh-haskell (<< 0.3), libalien-wxwidgets-perl (<< 0.65+dfsg-2), libanyevent-perl (<< 7.070-2), libcommon-sense-perl (<< 3.72-2~), libexception-class-perl (<< 1.42), libfile-path-perl (<< 2.12.01), libfile-spec-perl (<< 3.6301), libfile-temp-perl (<< 0.2304), libgtk2-perl-doc (<< 2:1.2491-4), libio-socket-ip-perl (<< 0.37), libjcode-perl (<< 2.13-3), libmarc-charset-perl (<< 1.2), libsbuild-perl (<< 0.67.0-1), libscalar-list-utils-perl (<< 1:1.42.02), libsocket-perl (<< 2.020.03), libxsloader-perl (<< 0.22), mailagent (<< 1:3.1-81-2), pdl (<< 1:2.007-4), perl (<< 5.24.1~), perl-modules (<< 5.24.1~), texinfo (<< 6.1.0.dfsg.1-8)
Conflicts: defoma (<< 0.11.12), doc-base (<< 0.10.3), mono-gac (<< 2.10.8.1-3), safe-rm (<< 0.8), update-inetd (<< 4.41)
Description: minimal Perl system
 Perl is a scripting language used in many system scripts and utilities.
 .
 This package provides a Perl interpreter and the small subset of the
 standard run-time library required to perform basic tasks. For a full
 Perl installation, install "perl" (and its dependencies, "perl-modules-5.24"
 and "perl-doc").
Homepage: http://dev.perl.org/perl5/

Package: libudev1
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 181
Maintainer: Debian systemd Maintainers <pkg-systemd-maintainers@lists.alioth.debian.org>
Architecture: armhf
Multi-Arch: same
Source: systemd
Version: 232-25+deb9u6
Depends: libc6 (>= 2.16), libgcc1 (>= 1:3.5)
Description: libudev shared library
 This library provides access to udev device information.
Homepage: https://www.freedesktop.org/wiki/Software/systemd

Package: libperl5.24
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 13703
Maintainer: Niko Tyni <ntyni@debian.org>
Architecture: armhf
Multi-Arch: same
Source: perl
Version: 5.24.1-3+deb9u4
Replaces: libarchive-tar-perl (<= 1.38-2), libcompress-raw-bzip2-perl (<< 2.069), libcompress-raw-zlib-perl (<< 2.069), libcompress-zlib-perl (<< 2.069.001), libdigest-md5-perl (<< 2.54), libdigest-sha-perl (<< 5.95.01), libencode-perl (<< 2.86), libio-compress-base-perl (<< 2.069.001), libio-compress-bzip2-perl (<< 2.069.001), libio-compress-perl (<< 2.069.001), libio-compress-zlib-perl (<< 2.069.001), libmime-base64-perl (<< 3.15), libmodule-corelist-perl (<< 2.14-2), libstorable-perl (<< 2.56.01), libsys-syslog-perl (<< 0.33.01), libthreads-perl (<< 2.07), libthreads-shared-perl (<< 1.51), libtime-hires-perl (<< 1.9733), libtime-piece-perl (<< 1.31), perl (<< 5.22.0~), perl-base (<< 5.22.0~)
Provides: libcompress-raw-bzip2-perl, libcompress-raw-zlib-perl, libcompress-zlib-perl, libdigest-md5-perl, libdigest-sha-perl, libencode-perl, libio-compress-base-perl, libio-compress-bzip2-perl, libio-compress-perl, libio-compress-zlib-perl, libmime-base64-perl, libstorable-perl, libsys-syslog-perl, libthreads-perl, libthreads-shared-perl, libtime-hires-perl, libtime-piece-perl, perl-cross-config
Depends: libbz2-1.0, libc6 (>= 2.23), libdb5.3, libgdbm3 (>= 1.8.3), zlib1g (>= 1:1.2.2.3), perl-modules-5.24 (>= 5.24.1-3+deb9u4)
Breaks: dh-make-perl (<< 0.73-1), ftpmirror (<< 1.96+dfsg-13), libcompress-raw-bzip2-perl (<< 2.069), libcompress-raw-zlib-perl (<< 2.069), libcompress-zlib-perl (<< 2.069.001), libdigest-md5-perl (<< 2.54), libdigest-sha-perl (<< 5.95.01), libencode-perl (<< 2.86), libhtml-template-compiled-perl (<< 0.95-1), libio-compress-base-perl (<< 2.069.001), libio-compress-bzip2-perl (<< 2.069.001), libio-compress-perl (<< 2.069.001), libio-compress-zlib-perl (<< 2.069.001), libload-perl (<< 0.20-1), libmime-base64-perl (<< 3.15), libnet-jifty-perl (<< 0.14-1), libperl-apireference-perl (<< 0.09-1), libregexp-optimizer-perl (<< 0.15-3), libsoap-lite-perl (<< 0.712-4), libstorable-perl (<< 2.56.01), libsys-syslog-perl (<< 0.33.01), libthreads-perl (<< 2.07), libthreads-shared-perl (<< 1.51), libtime-hires-perl (<< 1.9733), libtime-piece-perl (<< 1.31), libxml-parser-lite-tree-perl (<< 0.14-1), libyaml-perl (<< 0.73-1), mrtg (<< 2.16.3-3.1)
Description: shared Perl library
 This package contains the shared Perl library, used by applications
 which embed a Perl interpreter.
 .
 It also contains the architecture-dependent parts of the standard
 library (and depends on perl-modules-5.24 which contains the
 architecture-independent parts).
Homepage: http://dev.perl.org/perl5/

Package: strace
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 774
Maintainer: Steve McIntyre <93sam@debian.org>
Architecture: armhf
Version: 4.15-2
Depends: libc6 (>= 2.15)
Description: System call tracer
 strace is a system call tracer, i.e. a debugging tool which prints out
 a trace of all the system calls made by a another process/program.
 The program to be traced need not be recompiled for this, so you can
 use it on binaries for which you don't have source.
 .
 System calls and signals are events that happen at the user/kernel
 interface. A close examination of this boundary is very useful for bug
 isolation, sanity checking and attempting to capture race conditions.
Homepage: http://sourceforge.net/projects/strace/

Package: libnettle6
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 325
Maintainer: Magnus Holmgren <holmgren@debian.org>
Architecture: armhf
Multi-Arch: same
Source: nettle (3.3-1)
Version: 3.3-1+b2
Depends: libc6 (>= 2.4)
Description: low level cryptographic library (symmetric and one-way cryptos)
 Nettle is a cryptographic library that is designed to fit easily in more or
 less any context: In crypto toolkits for object-oriented languages (C++,
 Python, Pike, ...), in applications like LSH or GNUPG, or even in kernel
 space.
 .
 It tries to solve a problem of providing a common set of cryptographic
 algorithms for higher-level applications by implementing a
 context-independent set of cryptographic algorithms. In that light, Nettle
 doesn't do any memory allocation or I/O, it simply provides the
 cryptographic algorithms for the application to use in any environment and
 in any way it needs.
 .
 This package contains the symmetric and one-way cryptographic
 algorithms. To avoid having this package depend on libgmp, the
 asymmetric cryptos reside in a separate library, libhogweed.
Homepage: http://www.lysator.liu.se/~nisse/nettle/

Package: cpio
Status: install ok installed
Priority: important
Section: utils
Installed-Size: 649
Maintainer: Anibal Monsalve Salazar <anibal@debian.org>
Architecture: armhf
Multi-Arch: foreign
Version: 2.11+dfsg-6
Replaces: cpio-mt
Depends: libc6 (>= 2.17)
Suggests: libarchive1
Conflicts: cpio-mt, mt-st (<< 0.6)
Description: GNU cpio -- a program to manage archives of files
 GNU cpio is a tool for creating and extracting archives, or copying
 files from one place to another.  It handles a number of cpio formats
 as well as reading and writing tar files.
Homepage: http://www.gnu.org/software/cpio/

Package: libpopt0
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 207
Maintainer: Paul Martin <pm@debian.org>
Architecture: armhf
Multi-Arch: same
Source: popt (1.16-10)
Version: 1.16-10+b2
Replaces: popt
Depends: libc6 (>= 2.17)
Conflicts: libpopt-dev (<= 1.4-1), popt, rpm (<= 4.0.2-3)
Description: lib for parsing cmdline parameters
 Popt was heavily influenced by the getopt() and getopt_long() functions,
 but it allows more powerful argument expansion. It can parse arbitrary
 argv[] style arrays and automatically set variables based on command
 line arguments. It also allows command line arguments to be aliased via
 configuration files and includes utility functions for parsing arbitrary
 strings into argv[] arrays using shell-like rules.
 .
 This package contains the runtime library and locale data.
Homepage: http://rpm5.org/

Package: kmod
Status: install ok installed
Priority: important
Section: admin
Installed-Size: 171
Maintainer: Marco d'Itri <md@linux.it>
Architecture: armhf
Multi-Arch: foreign
Version: 23-2
Depends: libc6 (>= 2.17), libkmod2 (= 23-2), lsb-base
Breaks: alsa-base (<= 1.0.25+3), oss-compat (= 4)
Conffiles:
 /etc/init.d/kmod 82698019c962069b438bd2a82d9fa1e7
Description: tools for managing Linux kernel modules
 This package contains a set of programs for loading, inserting, and
 removing kernel modules for Linux.
 It replaces module-init-tools.

Package: libattr1
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 37
Maintainer: Anibal Monsalve Salazar <anibal@debian.org>
Architecture: armhf
Multi-Arch: same
Source: attr (1:2.4.47-2)
Version: 1:2.4.47-2+b2
Depends: libc6 (>= 2.4)
Conflicts: attr (<< 2.0.0)
Description: Extended attribute shared library
 Contains the runtime environment required by programs that make use
 of extended attributes.
Homepage: http://savannah.nongnu.org/projects/attr/

Package: libk5crypto3
Status: install ok installed
Priority: standard
Section: libs
Installed-Size: 258
Maintainer: Sam Hartman <hartmans@debian.org>
Architecture: armhf
Multi-Arch: same
Source: krb5
Version: 1.15-1+deb9u1
Depends: libc6 (>= 2.4), libkeyutils1 (>= 1.4), libkrb5support0 (>= 1.15~beta1)
Suggests: krb5-doc, krb5-user
Breaks: libgssapi-krb5-2 (<= 1.10+dfsg~alpha1), libkrb5-3 (<= 1.8~aa)
Description: MIT Kerberos runtime libraries - Crypto Library
 Kerberos is a system for authenticating users and services on a network.
 Kerberos is a trusted third-party service.  That means that there is a
 third party (the Kerberos server) that is trusted by all the entities on
 the network (users and services, usually called "principals").
 .
 This is the MIT reference implementation of Kerberos V5.
 .
 This package contains the runtime cryptography libraries used by
 applications and Kerberos clients.
Homepage: http://web.mit.edu/kerberos/

Package: libss2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 92
Maintainer: Theodore Y. Ts'o <tytso@mit.edu>
Architecture: armhf
Multi-Arch: same
Source: e2fsprogs
Version: 1.44.5-1~bpo9+1
Replaces: e2fsprogs (<< 1.34-1)
Depends: libcom-err2, libc6 (>= 2.17)
Description: command-line interface parsing library
 libss provides a simple command-line interface parser which will
 accept input from the user, parse the command into an argv argument
 vector, and then dispatch it to a handler function.
 .
 It was originally inspired by the Multics SubSystem library.
Homepage: http://e2fsprogs.sourceforge.net

Package: liburcu4
Status: install ok installed
Priority: extra
Section: libs
Installed-Size: 198
Maintainer: Jon Bernard <jbernard@debian.org>
Architecture: armhf
Multi-Arch: same
Source: liburcu
Version: 0.9.3-1
Depends: libc6 (>= 2.6)
Description: userspace RCU (read-copy-update) library
 This data synchronization library provides read-side access which scales
 linearly with the number of cores. It does so by allowing multiples copies of
 a given data structure to live at the same time, and by monitoring the data
 structure accesses to detect grace periods after which memory reclamation is
 possible.
Homepage: http://liburcu.org/

Package: libexpat1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 223
Maintainer: Laszlo Boszormenyi (GCS) <gcs@debian.org>
Architecture: armhf
Multi-Arch: same
Source: expat
Version: 2.2.0-2+deb9u1
Depends: libc6 (>= 2.4), libgcc1 (>= 1:3.5)
Conflicts: wink (<= 1.5.1060-4)
Description: XML parsing C library - runtime library
 This package contains the runtime, shared library of expat, the C
 library for parsing XML. Expat is a stream-oriented parser in
 which an application registers handlers for things the parser
 might find in the XML document (like start tags).
Homepage: http://expat.sourceforge.net

Package: libparted2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 398
Maintainer: Parted Maintainer Team <parted-maintainers@lists.alioth.debian.org>
Architecture: armhf
Multi-Arch: same
Source: parted
Version: 3.2-17
Provides: libparted
Depends: libblkid1 (>= 2.17.2), libc6 (>= 2.8), libdevmapper1.02.1 (>= 2:1.02.97), libuuid1 (>= 2.16)
Suggests: parted, libparted-dev, libparted-i18n (= 3.2-17)
Breaks: python-parted (<< 3.6-5)
Description: disk partition manipulator - shared library
 GNU Parted is a program that allows you to create, destroy, resize,
 move, and copy disk partitions. This is useful for creating space
 for new operating systems, reorganizing disk usage, and copying data
 to new hard disks.
 .
 This package contains the shared library.
Homepage: http://www.gnu.org/software/parted

Package: less
Status: install ok installed
Priority: important
Section: text
Installed-Size: 221
Maintainer: Anibal Monsalve Salazar <anibal@debian.org>
Architecture: armhf
Multi-Arch: foreign
Version: 481-2.1
Depends: libc6 (>= 2.11), libtinfo5 (>= 6), debianutils (>= 1.8)
Description: pager program similar to more
 This package provides "less", a file pager (that is, a memory-efficient
 utility for displaying text one screenful at a time). Less has many
 more features than the basic pager "more". As part of the GNU project,
 it is widely regarded as the standard pager on UNIX-derived systems.
 .
 Also provided are "lessecho", a simple utility for ensuring arguments
 with spaces are correctly quoted; "lesskey", a tool for modifying the
 standard (vi-like) keybindings; and "lesspipe", a filter for specific
 types of input, such as .doc or .txt.gz files.
Homepage: http://www.greenwoodsoftware.com/less/

Package: liblzma5
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 290
Maintainer: Jonathan Nieder <jrnieder@gmail.com>
Architecture: armhf
Multi-Arch: same
Source: xz-utils (5.2.2-1.2)
Version: 5.2.2-1.2+b1
Depends: libc6 (>= 2.17)
Description: XZ-format compression library
 XZ is the successor to the Lempel-Ziv/Markov-chain Algorithm
 compression format, which provides memory-hungry but powerful
 compression (often better than bzip2) and fast, easy decompression.
 .
 The native format of liblzma is XZ; it also supports raw (headerless)
 streams and the older LZMA format used by lzma. (For 7-Zip's related
 format, use the p7zip package instead.)
Homepage: http://tukaani.org/xz/

Package: apt-transport-https
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 204
Maintainer: APT Development Team <deity@lists.debian.org>
Architecture: armhf
Source: apt
Version: 1.4.8
Depends: libapt-pkg5.0 (>= 1.3~rc2), libc6 (>= 2.4), libcurl3-gnutls (>= 7.16.2), libgcc1 (>= 1:3.5), libstdc++6 (>= 5.2)
Recommends: ca-certificates
Description: https download transport for APT
 This package enables the usage of 'deb https://foo distro main' lines
 in the /etc/apt/sources.list so that all package managers using the
 libapt-pkg library can access metadata and packages available in sources
 accessible over https (Hypertext Transfer Protocol Secure).
 .
 This transport supports server as well as client authentication
 with certificates.

Package: klibc-utils
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 295
Maintainer: maximilian attems <maks@debian.org>
Architecture: armhf
Source: klibc
Version: 2.0.4-9
Depends: libklibc (= 2.0.4-9)
Breaks: initramfs-tools (<< 0.103)
Description: small utilities built with klibc for early boot
 This package contains a collection of programs that are linked
 against klibc. These duplicate some of the functionality of a
 regular Linux toolset, but are typically much smaller than their
 full-function counterparts.  They are intended for inclusion in
 initramfs images and embedded systems.
Homepage: https://git.kernel.org/cgit/libs/klibc/klibc.git

Package: libidn2-0
Status: install ok installed
Priority: extra
Section: libs
Installed-Size: 170
Maintainer: Debian Libidn team <help-libidn@gnu.org>
Architecture: armhf
Multi-Arch: same
Version: 0.16-1+deb9u1
Depends: libc6 (>= 2.4), libunistring0
Description: Internationalized domain names (IDNA2008) library
 Libidn2 implements the revised algorithm for internationalized domain
 names called IDNA2008.
 .
 This package contains runtime libraries.
Homepage: https://www.gnu.org/software/libidn/#libidn2

Package: libpam-modules-bin
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 186
Maintainer: Steve Langasek <vorlon@debian.org>
Architecture: armhf
Multi-Arch: foreign
Source: pam
Version: 1.1.8-3.6
Replaces: libpam-modules (<< 1.1.3-8)
Depends: libaudit1 (>= 1:2.2.1), libc6 (>= 2.4), libpam0g (>= 0.99.7.1), libselinux1 (>= 1.32)
Description: Pluggable Authentication Modules for PAM - helper binaries
 This package contains helper binaries used by the standard set of PAM
 modules in the libpam-modules package.
Homepage: http://www.linux-pam.org/

Package: libip4tc0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 101
Maintainer: Arturo Borrero Gonzalez <arturo@debian.org>
Architecture: armhf
Multi-Arch: same
Source: iptables
Version: 1.6.0+snapshot20161117-6
Depends: libc6 (>= 2.4)
Description: netfilter libip4tc library
 The user-space iptables (IPv4) C library from the Netfilter xtables framework.
 .
 iptables IPv4 ruleset ADT and kernel interface.
 .
 This library has been considered private for years (and still is), in the
 sense of changing symbols and backward compatibility not guaranteed.
Homepage: http://www.netfilter.org/

Package: grep
Essential: yes
Status: install ok installed
Priority: required
Section: utils
Installed-Size: 1054
Maintainer: Anibal Monsalve Salazar <anibal@debian.org>
Architecture: armhf
Multi-Arch: foreign
Version: 2.27-2
Provides: rgrep
Depends: dpkg (>= 1.15.4) | install-info
Pre-Depends: libc6 (>= 2.5), libpcre3
Suggests: libpcre3 (>= 7.7)
Conflicts: rgrep
Description: GNU grep, egrep and fgrep
 'grep' is a utility to search for text in files; it can be used from the
 command line or in scripts.  Even if you don't want to use it, other packages
 on your system probably will.
 .
 The GNU family of grep utilities may be the "fastest grep in the west".
 GNU grep is based on a fast lazy-state deterministic matcher (about
 twice as fast as stock Unix egrep) hybridized with a Boyer-Moore-Gosper
 search for a fixed string that eliminates impossible text from being
 considered by the full regexp matcher without necessarily having to
 look at every character. The result is typically many times faster
 than Unix grep or egrep. (Regular expressions containing backreferencing
 will run more slowly, however.)
Homepage: http://www.gnu.org/software/grep/

Package: ifupdown
Status: install ok installed
Priority: important
Section: admin
Installed-Size: 173
Maintainer: Guus Sliepen <guus@debian.org>
Architecture: armhf
Multi-Arch: foreign
Version: 0.8.19
Replaces: systemd (<< 228-3~)
Depends: libc6 (>= 2.8), init-system-helpers (>= 1.18~), lsb-base, adduser, iproute2
Recommends: isc-dhcp-client | dhcp-client
Suggests: ppp, rdnssd
Breaks: systemd (<< 228-3~)
Conffiles:
 /etc/default/networking 35cd4a2713981c9239ce4532c1bfc1c7
 /etc/init.d/networking 27013efdfe13470845c70a9e00a61fde
 /etc/init/network-interface-container.conf 4daa570594afc50940f140a7731d20d1
 /etc/init/network-interface-security.conf feb6b4b52fe24c44ff1bc68addf245d6
 /etc/init/network-interface.conf aae12345eba8e946579b06798b1752c1
 /etc/init/networking.conf c50811e19bcd596d99b0467b40cfbb8b
 /etc/network/if-down.d/upstart 1a0205ddbc1446782a8d4d818e97d8a5
 /etc/network/if-up.d/upstart dfbcde4fd4a3a2553930605e03e160ab
Description: high level tools to configure network interfaces
 This package provides the tools ifup and ifdown which may be used to
 configure (or, respectively, deconfigure) network interfaces based on
 interface definitions in the file /etc/network/interfaces.

Package: libnfsidmap2
Status: install ok installed
Priority: standard
Section: libs
Installed-Size: 86
Maintainer: Anibal Monsalve Salazar <anibal@debian.org>
Architecture: armhf
Multi-Arch: same
Source: libnfsidmap
Version: 0.25-5.1
Replaces: nfs-common (<< 1:1.2.2-1)
Depends: libc6 (>= 2.7), libldap-2.4-2 (>= 2.4.7)
Breaks: nfs-common (<< 1:1.2.2-1)
Conflicts: libnfsidmap1
Description: NFS idmapping library
 libnfsidmap provides functions to map between NFSv4 names (which are
 of the form user@domain) and local uid's and gid's.
Homepage: http://www.citi.umich.edu/projects/nfsv4/linux/

Package: psmisc
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 564
Maintainer: Craig Small <csmall@debian.org>
Architecture: armhf
Multi-Arch: foreign
Source: psmisc (22.21-2.1)
Version: 22.21-2.1+b2
Replaces: procps (<< 1:1.2)
Depends: libc6 (>= 2.8), libselinux1 (>= 1.32), libtinfo5 (>= 6)
Description: utilities that use the proc file system
 This package contains miscellaneous utilities that use the proc FS:
 .
  - fuser: identifies processes that are using files or sockets.
  - killall: kills processes by name (e.g. "killall -HUP named").
  - peekfd: shows the data traveling over a file descriptor.
  - pstree: shows currently running processes as a tree.
  - prtstat: print the contents of /proc/<pid>/stat
Homepage: http://psmisc.sf.net/

Package: base-passwd
Essential: yes
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 220
Maintainer: Colin Watson <cjwatson@debian.org>
Architecture: armhf
Multi-Arch: foreign
Version: 3.5.43
Replaces: base
Depends: libc6 (>= 2.8), libdebconfclient0 (>= 0.145)
Recommends: debconf (>= 0.5) | debconf-2.0
Description: Debian base system master password and group files
 These are the canonical master copies of the user database files
 (/etc/passwd and /etc/group), containing the Debian-allocated user and
 group IDs. The update-passwd tool is provided to keep the system databases
 synchronized with these master files.

Package: libisc-export160
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 466
Maintainer: LaMont Jones <lamont@debian.org>
Architecture: armhf
Source: bind9
Version: 1:9.10.3.dfsg.P4-12.3+deb9u4
Depends: libc6 (>= 2.4)
Description: Exported ISC Shared Library
 The Berkeley Internet Name Domain (BIND) implements an Internet domain
 name server.  BIND is the most widely-used name server software on the
 Internet, and is supported by the Internet Software Consortium, www.isc.org.
 .
 This package delivers the exported libisc shared library.

Package: libnghttp2-14
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 144
Maintainer: Dave Beckett <dajobe@debian.org>
Architecture: armhf
Multi-Arch: same
Source: nghttp2
Version: 1.18.1-1
Depends: libc6 (>= 2.4)
Description: library implementing HTTP/2 protocol (shared library)
 This is an implementation of the Hypertext Transfer Protocol version
 2 in C. The framing layer of HTTP/2 is implemented as a reusable C
 library.
 .
 This package installs a shared library.
Homepage: https://nghttp2.org/

Package: libjs-underscore
Status: install ok installed
Priority: optional
Section: web
Installed-Size: 251
Maintainer: Debian Javascript Maintainers <pkg-javascript-devel@lists.alioth.debian.org>
Architecture: all
Multi-Arch: foreign
Source: underscore
Version: 1.8.3~dfsg-1
Recommends: javascript-common, libjs-jquery
Description: JavaScript's functional programming helper library
 Underscore is a utility-belt library for JavaScript that provides a lot
 of the functional programming support that you would expect in
 Prototype.js (or Ruby), but without extending any of the built-in
 JavaScript objects.  It's the tie to go along with jQuery's tux.
 .
 Underscore provides 60-odd functions that support both the usual
 functional suspects: map, select, invoke - as well as more specialized
 helpers: function binding, javascript templating, deep equality
 testing, and so on.  It delegates to built-in functions, if present, so
 modern browsers will use the native implementations of forEach, map,
 reduce, filter, every, some and indexOf.
Homepage: http://underscorejs.org/

Package: e2fslibs
Status: install ok installed
Priority: optional
Section: oldlibs
Installed-Size: 70
Maintainer: Theodore Y. Ts'o <tytso@mit.edu>
Architecture: armhf
Multi-Arch: same
Source: e2fsprogs
Version: 1.44.5-1~bpo9+1
Depends: libext2fs2
Description: transitional package
 This is a transitional package. It can safely be removed.
Homepage: http://e2fsprogs.sourceforge.net

Package: liblz4-1
Status: install ok installed
Priority: extra
Section: libs
Installed-Size: 68
Maintainer: Nobuhiro Iwamatsu <iwamatsu@debian.org>
Architecture: armhf
Multi-Arch: same
Source: lz4 (0.0~r131-2)
Version: 0.0~r131-2+b1
Depends: libc6 (>= 2.4)
Description: Fast LZ compression algorithm library - runtime
 LZ4 is a very fast lossless compression algorithm, providing compression speed
 at 400 MB/s per core, scalable with multi-cores CPU. It also features an
 extremely fast decoder, with speed in multiple GB/s per core, typically
 reaching RAM speed limits on multi-core systems.
 .
 This package includes the shared library.
Homepage: https://github.com/Cyan4973/lz4

Package: time
Status: install ok installed
Priority: standard
Section: utils
Installed-Size: 81
Maintainer: Bob Proulx <bob@proulx.com>
Architecture: armhf
Multi-Arch: foreign
Source: time (1.7-25.1)
Version: 1.7-25.1+b1
Depends: libc6 (>= 2.4)
Description: GNU time program for measuring CPU resource usage
 The 'time' command runs another program, then displays information
 about the resources used by that program, collected by the system while
 the program was running.  You can select which information is reported
 and the format in which it is shown, or have 'time' save the information
 in a file instead of display it on the screen.
 .
 The resources that 'time' can report on fall into the general
 categories of time, memory, I/O, and IPC calls.
 .
 The GNU version can format the output in arbitrary ways by using a
 printf-style format string to include various resource measurements.
Homepage: http://www.gnu.org/software/time

Package: debianutils
Essential: yes
Status: install ok installed
Priority: required
Section: utils
Installed-Size: 202
Maintainer: Clint Adams <clint@debian.org>
Architecture: armhf
Multi-Arch: foreign
Version: 4.8.1.1
Replaces: manpages-pl (<< 1:0.5)
Depends: sensible-utils
Pre-Depends: libc6 (>= 2.15)
Description: Miscellaneous utilities specific to Debian
 This package provides a number of small utilities which are used
 primarily by the installation scripts of Debian packages, although
 you may use them directly.
 .
 The specific utilities included are:
 add-shell installkernel ischroot remove-shell run-parts savelog
 tempfile which

Package: mime-support
Status: install ok installed
Priority: standard
Section: net
Installed-Size: 110
Maintainer: Mime-Support Maintainers <mime-support@plessy.org>
Architecture: all
Multi-Arch: foreign
Version: 3.60
Recommends: bzip2, file, xz-utils
Conffiles:
 /etc/mime.types 4561fade4c4fc48e526e72871c470eec
 /etc/mailcap.order ba07e08a7fe3741d0b8339127963190e
Description: MIME files 'mime.types' & 'mailcap', and support programs
 As these files can be used by all MIME compliant programs, they
 have been moved into their own package that others can depend upon.
 .
 Other packages add themselves as viewers/editors/composers/etc by
 using the provided "update-mime" program.
 .
 In addition, the commands "see", "edit", "compose", and "print"
 will display, alter, create, and print (respectively) any file using
 a program determined from the entries in the mime.types and mailcap
 files.

Package: dbench
Status: install ok installed
Priority: extra
Section: utils
Installed-Size: 25687
Maintainer: Mattias Nordstrom <mnordstr@debian.org>
Architecture: armhf
Source: dbench (4.0-2)
Version: 4.0-2+b2
Depends: libc6 (>= 2.4), libpopt0 (>= 1.14)
Description: The dbench (disk) and tbench (TCP) benchmarks
 dbench and tbench simulate the load of the netbench "industry
 standard" benchmark used to rate (windows) file servers.  Unlike netbench,
 they do not require a lab of Microsoft Windows PCs: dbench produces
 the filesystem load on a netbench run, and tbench produces the
 network load, allowing simpler bottleneck isolation.
 .
 Note that this benchmark is *not* a realistic reflection of normal
 server load.
Homepage: http://samba.org/ftp/tridge/dbench/

Package: libgcrypt20
Status: install ok installed
Priority: standard
Section: libs
Installed-Size: 798
Maintainer: Debian GnuTLS Maintainers <pkg-gnutls-maint@lists.alioth.debian.org>
Architecture: armhf
Multi-Arch: same
Version: 1.7.6-2+deb9u3
Depends: libc6 (>= 2.15), libgpg-error0 (>= 1.14)
Suggests: rng-tools
Description: LGPL Crypto library - runtime library
 libgcrypt contains cryptographic functions.  Many important free
 ciphers, hash algorithms and public key signing algorithms have been
 implemented:
 .
 Arcfour, Blowfish, CAST5, DES, AES, Twofish, Serpent, rfc2268 (rc2), SEED,
 Poly1305, Camellia, ChaCha20, IDEA, Salsa, CRC, MD2, MD4, MD5, RIPE-MD160,
 SHA-1, SHA-256, SHA-512, SHA3-224, SHA3-256, SHA3-384, SHA3-512, SHAKE128,
 SHAKE256 Tiger, Whirlpool, DSA, DSA2, ElGamal, RSA, ECC (Curve25519,
 sec256k1, GOST R 34.10-2001 and GOST R 34.10-2012, etc.)
Homepage: http://directory.fsf.org/project/libgcrypt/

Package: libncursesw5
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 224
Maintainer: Craig Small <csmall@debian.org>
Architecture: armhf
Multi-Arch: same
Source: ncurses
Version: 6.0+20161126-1+deb9u2
Depends: libtinfo5 (= 6.0+20161126-1+deb9u2), libc6 (>= 2.4)
Recommends: libgpm2
Description: shared libraries for terminal handling (wide character support)
 The ncurses library routines are a terminal-independent method of
 updating character screens with reasonable optimization.
 .
 This package contains the shared libraries necessary to run programs
 compiled with ncursesw, which includes support for wide characters.
Homepage: http://invisible-island.net/ncurses/

Package: bash
Essential: yes
Status: install ok installed
Priority: required
Section: shells
Installed-Size: 5442
Maintainer: Matthias Klose <doko@debian.org>
Architecture: armhf
Multi-Arch: foreign
Version: 4.4-5
Replaces: bash-completion (<< 20060301-0), bash-doc (<= 2.05-1)
Depends: base-files (>= 2.1.12), debianutils (>= 2.15)
Pre-Depends: dash (>= 0.5.5.1-2.2), libc6 (>= 2.15), libtinfo5 (>= 6)
Recommends: bash-completion (>= 20060301-0)
Suggests: bash-doc
Conflicts: bash-completion (<< 20060301-0)
Conffiles:
 /etc/bash.bashrc 87b895cef45b8090d628a1d9a0f4bfb8
 /etc/skel/.bash_logout 22bfb8c1dd94b5f3813a2b25da67463f
 /etc/skel/.bashrc ee35a240758f374832e809ae0ea4883a
 /etc/skel/.profile ecb6d3479ac3823f1da7f314d871989b
Description: GNU Bourne Again SHell
 Bash is an sh-compatible command language interpreter that executes
 commands read from the standard input or from a file.  Bash also
 incorporates useful features from the Korn and C shells (ksh and csh).
 .
 Bash is ultimately intended to be a conformant implementation of the
 IEEE POSIX Shell and Tools specification (IEEE Working Group 1003.2).
 .
 The Programmable Completion Code, by Ian Macdonald, is now found in
 the bash-completion package.
Homepage: http://tiswww.case.edu/php/chet/bash/bashtop.html

Package: libuuid1
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 102
Maintainer: Debian util-linux Maintainers <ah-util-linux@debian.org>
Architecture: armhf
Multi-Arch: same
Source: util-linux
Version: 2.29.2-1+deb9u1
Replaces: e2fsprogs (<< 1.34-1)
Depends: passwd, libc6 (>= 2.4)
Recommends: uuid-runtime
Description: Universally Unique ID library
 The libuuid library generates and parses 128-bit Universally Unique
 IDs (UUIDs). A UUID is an identifier that is unique within the space
 of all such identifiers across both space and time. It can be used for
 multiple purposes, from tagging objects with an extremely short lifetime
 to reliably identifying very persistent objects across a network.
 .
 See RFC 4122 for more information.

Package: libsigsegv2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 49
Maintainer: Debian Common Lisp Team <pkg-common-lisp-devel@lists.alioth.debian.org>
Architecture: armhf
Multi-Arch: same
Source: libsigsegv
Version: 2.10-5
Depends: libc6 (>= 2.4)
Description: Library for handling page faults in a portable way
 GNU libsigsegv is a library that allows handling page faults in a
 portable way. It is used e.g. for generational garbage collectors
 and stack overflow handlers.
 .
 This package contains the shared library.
Homepage: http://libsigsegv.sourceforge.net/

Package: libdb5.3
Status: install ok installed
Priority: standard
Section: libs
Installed-Size: 1115
Maintainer: Debian Berkeley DB Group <pkg-db-devel@lists.alioth.debian.org>
Architecture: armhf
Multi-Arch: same
Source: db5.3
Version: 5.3.28-12+deb9u1
Depends: libc6 (>= 2.17)
Description: Berkeley v5.3 Database Libraries [runtime]
 This is the runtime package for programs that use the v5.3 Berkeley
 database library.
Homepage: http://www.oracle.com/technetwork/database/database-technologies/berkeleydb/overview/index.html

Package: libldap-common
Status: install ok installed
Priority: standard
Section: libs
Installed-Size: 108
Maintainer: Debian OpenLDAP Maintainers <pkg-openldap-devel@lists.alioth.debian.org>
Architecture: all
Multi-Arch: foreign
Source: openldap
Version: 2.4.44+dfsg-5+deb9u2
Replaces: libldap-2.4-2 (<< 2.4.44+dfsg-1)
Conffiles:
 /etc/ldap/ldap.conf 0b3f4d19d88498314478273ce10b0a70
Description: OpenLDAP common files for libraries
 These are common files for the run-time libraries for the OpenLDAP
 (Lightweight Directory Access Protocol) servers and clients.
Homepage: http://www.openldap.org/

Package: initramfs-tools-core
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 210
Maintainer: Debian kernel team <debian-kernel@lists.debian.org>
Architecture: all
Multi-Arch: foreign
Source: initramfs-tools
Version: 0.130
Replaces: initramfs-tools (<< 0.121~)
Depends: klibc-utils (>= 2.0.4-8~), cpio, kmod | module-init-tools, udev
Recommends: busybox (>= 1:1.22.0-17~) | busybox-static (>= 1:1.22.0-17~)
Suggests: bash-completion
Breaks: busybox (<< 1:1.22.0-17~), busybox-static (<< 1:1.22.0-17~), initramfs-tools (<< 0.121~)
Conffiles:
 /etc/initramfs-tools/initramfs.conf 7690949b00a8a2c0fad84fa4e965b00c
Description: generic modular initramfs generator (core tools)
 This package contains the mkinitramfs program that can be used to
 create a bootable initramfs for a Linux kernel.  The initramfs should
 be loaded along with the kernel and is then responsible for mounting
 the root filesystem and starting the main init system.

Package: libboost-thread1.62.0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 156
Maintainer: Debian Boost Team <pkg-boost-devel@lists.alioth.debian.org>
Architecture: armhf
Multi-Arch: same
Source: boost1.62
Version: 1.62.0+dfsg-4
Depends: libboost-system1.62.0, libc6 (>= 2.4), libgcc1 (>= 1:3.5), libstdc++6 (>= 5.2)
Description: portable C++ multi-threading
 This package forms part of the Boost C++ Libraries collection.
 .
 Toolkit for writing C++ programs that execute as multiple,
 asynchronous, independent, threads-of-execution. Each thread has its
 own machine state including program instruction counter and
 registers.
Homepage: http://www.boost.org/libs/thread/

Package: libreadline7
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 280
Maintainer: Matthias Klose <doko@debian.org>
Architecture: armhf
Multi-Arch: same
Source: readline
Version: 7.0-3
Depends: readline-common, libc6 (>= 2.15), libtinfo5 (>= 6)
Description: GNU readline and history libraries, run-time libraries
 The GNU readline library aids in the consistency of user interface
 across discrete programs that need to provide a command line
 interface.
 .
 The GNU history library provides a consistent user interface for
 recalling lines of previously typed input.

Package: libcap2-bin
Status: install ok installed
Priority: important
Section: utils
Installed-Size: 73
Maintainer: Christian Kastner <ckk@debian.org>
Architecture: armhf
Multi-Arch: foreign
Source: libcap2
Version: 1:2.25-1
Replaces: libcap-bin
Depends: libc6 (>= 2.4), libcap2 (>= 1:2.10)
Recommends: libpam-cap
Breaks: libcap-bin
Description: POSIX 1003.1e capabilities (utilities)
 Libcap implements the user-space interfaces to the POSIX 1003.1e capabilities
 available in Linux kernels. These capabilities are a partitioning of the all
 powerful root privilege into a set of distinct privileges.
 .
 This package contains additional utilities.
Homepage: http://sites.google.com/site/fullycapable/

Package: debconf
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 558
Maintainer: Debconf Developers <debconf-devel@lists.alioth.debian.org>
Architecture: all
Multi-Arch: foreign
Version: 1.5.61
Replaces: debconf-tiny
Provides: debconf-2.0
Pre-Depends: perl-base (>= 5.20.1-3~)
Recommends: apt-utils (>= 0.5.1), debconf-i18n
Suggests: debconf-doc, debconf-utils, whiptail | dialog, libterm-readline-gnu-perl, libgtk2-perl (>= 1:1.130), libnet-ldap-perl, perl, libqtgui4-perl, libqtcore4-perl
Conflicts: apt (<< 0.3.12.1), cdebconf (<< 0.96), debconf-tiny, debconf-utils (<< 1.3.22), dialog (<< 0.9b-20020814-1), menu (<= 2.1.3-1), whiptail (<< 0.51.4-11), whiptail-utf8 (<= 0.50.17-13)
Conffiles:
 /etc/apt/apt.conf.d/70debconf 7e9d09d5801a42b4926b736b8eeabb73
 /etc/debconf.conf 8c0619be413824f1fc7698cee0f23811
Description: Debian configuration management system
 Debconf is a configuration management system for debian packages. Packages
 use Debconf to ask questions when they are installed.

Package: zlib1g
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 123
Maintainer: Mark Brown <broonie@debian.org>
Architecture: armhf
Multi-Arch: same
Source: zlib
Version: 1:1.2.8.dfsg-5
Provides: libz1
Depends: libc6 (>= 2.4)
Breaks: libxml2 (<< 2.7.6.dfsg-2), texlive-binaries (<< 2009-12)
Conflicts: zlib1 (<= 1:1.0.4-7)
Description: compression library - runtime
 zlib is a library implementing the deflate compression method found
 in gzip and PKZIP.  This package includes the shared library.
Homepage: http://zlib.net/

Package: lvm2
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 1834
Maintainer: Debian LVM Team <pkg-lvm-maintainers@lists.alioth.debian.org>
Architecture: armhf
Multi-Arch: foreign
Version: 2.02.168-2
Depends: libblkid1 (>= 2.24.2), libc6 (>= 2.15), libdevmapper-event1.02.1 (>= 2:1.02.74), libdevmapper1.02.1 (>= 2:1.02.135), liblvm2app2.2 (>= 2.02.168), libreadline5 (>= 5.2), libudev1 (>= 183), init-system-helpers (>= 1.18~), lsb-base, dmsetup, dmeventd
Suggests: thin-provisioning-tools
Conffiles:
 /etc/init.d/lvm2 70063dce3a90eca5ef673579e5fcc402
 /etc/init.d/lvm2-lvmetad c67e25f2c711f99b9cdaca291a143986
 /etc/init.d/lvm2-lvmpolld 6ee7740a641d91e302d3fbfe42a14942
 /etc/lvm/lvm.conf 1df0d4f1f77d9d251d6e4d9dd6c35da9
Description: Linux Logical Volume Manager
 This is LVM2, the rewrite of The Linux Logical Volume Manager.  LVM
 supports enterprise level volume management of disk and disk subsystems
 by grouping arbitrary disks into volume groups. The total capacity of
 volume groups can be allocated to logical volumes, which are accessed as
 regular block devices.
Homepage: http://sources.redhat.com/lvm2/

Package: libcurl3-gnutls
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 423
Maintainer: Alessandro Ghedini <ghedo@debian.org>
Architecture: armhf
Multi-Arch: same
Source: curl
Version: 7.52.1-5+deb9u8
Depends: libc6 (>= 2.17), libcomerr2 (>= 1.01), libgnutls30 (>= 3.5.6), libgssapi-krb5-2 (>= 1.14+dfsg), libidn2-0 (>= 0.6), libk5crypto3 (>= 1.6.dfsg.2), libkrb5-3 (>= 1.6.dfsg.2), libldap-2.4-2 (>= 2.4.7), libnettle6, libnghttp2-14 (>= 1.12.0), libpsl5 (>= 0.13.0), librtmp1 (>= 2.4+20131018.git79459a2-3~), libssh2-1 (>= 1.7.0), zlib1g (>= 1:1.1.4)
Recommends: ca-certificates
Description: easy-to-use client-side URL transfer library (GnuTLS flavour)
 libcurl is an easy-to-use client-side URL transfer library, supporting DICT,
 FILE, FTP, FTPS, GOPHER, HTTP, HTTPS, IMAP, IMAPS, LDAP, LDAPS, POP3, POP3S,
 RTMP, RTSP, SCP, SFTP, SMTP, SMTPS, TELNET and TFTP.
 .
 libcurl supports SSL certificates, HTTP POST, HTTP PUT, FTP uploading, HTTP
 form based upload, proxies, cookies, user+password authentication (Basic,
 Digest, NTLM, Negotiate, Kerberos), file transfer resume, http proxy tunneling
 and more!
 .
 libcurl is free, thread-safe, IPv6 compatible, feature rich, well supported,
 fast, thoroughly documented and is already used by many known, big and
 successful companies and numerous applications.
 .
 SSL support is provided by GnuTLS.
Homepage: http://curl.haxx.se

Package: libpsl5
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 65
Maintainer: Tim Rühsen <tim.ruehsen@gmx.de>
Architecture: armhf
Multi-Arch: same
Source: libpsl
Version: 0.17.0-3
Depends: libidn2-0 (>= 0.16), libc6 (>= 2.4), libunistring0
Recommends: publicsuffix (>= 20150507)
Description: Library for Public Suffix List (shared libraries)
 Libpsl allows checking domains against the Public Suffix List.
 It can be used to avoid privacy-leaking 'super-cookies',
 'super domain' certificates, for domain highlighting purposes
 sorting domain lists by site and more.
 .
 Please see https://publicsuffix.org for more detailed information.
 .
 This package contains runtime libraries.
Homepage: https://github.com/rockdaboot/libpsl

Package: libboost-random1.62.0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 63
Maintainer: Debian Boost Team <pkg-boost-devel@lists.alioth.debian.org>
Architecture: armhf
Multi-Arch: same
Source: boost1.62
Version: 1.62.0+dfsg-4
Depends: libboost-system1.62.0, libc6 (>= 2.4), libgcc1 (>= 1:3.5), libstdc++6 (>= 5.2)
Description: Boost Random Number Library
 This package forms part of the Boost C++ Libraries collection.
 .
 The Boost Random Number Library (Boost.Random for short) provides a
 variety of generators and distributions to produce random numbers
 having useful properties, such as uniform distribution.
Homepage: http://www.boost.org/libs/random/

Package: hostname
Essential: yes
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 42
Maintainer: Debian Hostname Team <hostname-devel@lists.alioth.debian.org>
Architecture: armhf
Source: hostname (3.18)
Version: 3.18+b1
Replaces: nis (<< 3.17-30)
Pre-Depends: libc6 (>= 2.4)
Breaks: nis (<< 3.17-30)
Description: utility to set/show the host name or domain name
 This package provides commands which can be used to display the system's
 DNS name, and to display or set its hostname or NIS domain name.

Package: bash-completion
Status: install ok installed
Priority: standard
Section: shells
Installed-Size: 1220
Maintainer: Bash Completion Maintainers <bash-completion-devel@lists.alioth.debian.org>
Architecture: all
Multi-Arch: foreign
Version: 1:2.1-4.3
Replaces: bash, cryptsetup (<< 2:1.1.2-2), xen-tools (<= 4.1-1)
Depends: bash (>= 3.2)
Pre-Depends: dpkg (>= 1.15.7.2~)
Breaks: xen-tools (<= 4.1-1)
Conffiles:
 /etc/bash_completion a81b3f1cb197219b815942f4fc7fa94e
 /etc/profile.d/bash_completion.sh 749e4786543bc3d19e20b0e214806c35
Description: programmable completion for the bash shell
 bash completion extends bash's standard completion behavior to achieve
 complex command lines with just a few keystrokes.  This project was
 conceived to produce programmable completion routines for the most
 common Linux/UNIX commands, reducing the amount of typing sysadmins
 and programmers need to do on a daily basis.
Homepage: http://bash-completion.alioth.debian.org

Package: multiarch-support
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 220
Maintainer: GNU Libc Maintainers <debian-glibc@lists.debian.org>
Architecture: armhf
Multi-Arch: foreign
Source: glibc
Version: 2.24-11+deb9u3
Depends: libc6 (>= 2.13-5)
Description: Transitional package to ensure multiarch compatibility
 This is a transitional package used to ensure multiarch support is present
 in ld.so before unpacking libraries to the multiarch directories.  It can
 be removed once nothing on the system depends on it.
Homepage: http://www.gnu.org/software/libc/libc.html

Package: tzdata
Status: install ok installed
Priority: required
Section: localization
Installed-Size: 3014
Maintainer: GNU Libc Maintainers <debian-glibc@lists.debian.org>
Architecture: all
Multi-Arch: foreign
Version: 2018g-0+deb9u1
Replaces: libc0.1, libc0.3, libc6, libc6.1
Provides: tzdata-stretch
Depends: debconf (>= 0.5) | debconf-2.0
Description: time zone and daylight-saving time data
 This package contains data required for the implementation of
 standard local time for many representative locations around the
 globe. It is updated periodically to reflect changes made by
 political bodies to time zone boundaries, UTC offsets, and
 daylight-saving rules.
Homepage: http://www.iana.org/time-zones

Package: nfs-common
Status: install ok installed
Priority: standard
Section: net
Installed-Size: 559
Maintainer: Debian kernel team <debian-kernel@lists.debian.org>
Architecture: armhf
Source: nfs-utils
Version: 1:1.3.4-2.1
Replaces: mount (<< 2.13~), nfs-client, nfs-kernel-server (<< 1:1.2.8-6~)
Provides: nfs-client
Depends: libc6 (>= 2.15), libcap2 (>= 1:2.10), libcomerr2 (>= 1.01), libdevmapper1.02.1 (>= 2:1.02.97), libevent-2.0-5 (>= 2.0.10-stable), libgssapi-krb5-2 (>= 1.14+dfsg), libk5crypto3 (>= 1.6.dfsg.2), libkeyutils1 (>= 1.5.9), libkrb5-3 (>= 1.6.dfsg.2), libmount1 (>= 2.19.1), libnfsidmap2, libtirpc1 (>= 0.2.4), libwrap0 (>= 7.6-4~), init-system-helpers (>= 1.18~), rpcbind, adduser, ucf, lsb-base (>= 1.3-9ubuntu3), keyutils
Recommends: python
Suggests: open-iscsi, watchdog
Breaks: nfs-kernel-server (<< 1:1.2.8-6~)
Conflicts: nfs-client
Conffiles:
 /etc/default/nfs-common ddcb1fbb90a14ff9850f22eed0127a10
 /etc/init.d/nfs-common 54a170f8dab112f2f6d7f49db71fcc34
 /etc/request-key.d/id_resolver.conf c7df239caa9880e7d6048cff6d46adc7
Description: NFS support files common to client and server
 Use this package on any machine that uses NFS, either as client or
 server.  Programs included: lockd, statd, showmount, nfsstat, gssd,
 idmapd and mount.nfs.
Homepage: http://nfs.sourceforge.net/

Package: libklibc
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 88
Maintainer: maximilian attems <maks@debian.org>
Architecture: armhf
Source: klibc
Version: 2.0.4-9
Description: minimal libc subset for use with initramfs
 klibc is intended to be a minimalistic libc subset for use with
 initramfs.  It is deliberately written for small size, minimal
 entanglement, and portability, not speed.  It is definitely a work in
 progress, and a lot of things are still missing.
Homepage: https://git.kernel.org/cgit/libs/klibc/klibc.git

Package: systemd-sysv
Status: install ok installed
Priority: important
Section: admin
Installed-Size: 106
Maintainer: Debian systemd Maintainers <pkg-systemd-maintainers@lists.alioth.debian.org>
Architecture: armhf
Multi-Arch: foreign
Source: systemd
Version: 232-25+deb9u6
Replaces: sysvinit (<< 2.88dsf-44~), sysvinit-core, upstart (<< 1.13.2-0ubuntu10~), upstart-sysv
Pre-Depends: systemd
Conflicts: file-rc, openrc (<< 0.20.4-2.1), sysvinit-core, upstart (<< 1.13.2-0ubuntu10~), upstart-sysv
Description: system and service manager - SysV links
 systemd is a system and service manager for Linux. It provides aggressive
 parallelization capabilities, uses socket and D-Bus activation for starting
 services, offers on-demand starting of daemons, keeps track of processes using
 Linux control groups, maintains mount and automount points and implements an
 elaborate transactional dependency-based service control logic.
 .
 systemd is compatible with SysV and LSB init scripts and can work as a
 drop-in replacement for sysvinit.
 .
 This package provides the manual pages and links needed for systemd
 to replace sysvinit. Installing systemd-sysv will overwrite /sbin/init with a
 link to systemd.
Homepage: https://www.freedesktop.org/wiki/Software/systemd

Package: mawk
Status: install ok installed
Priority: required
Section: interpreters
Installed-Size: 144
Maintainer: Steve Langasek <vorlon@debian.org>
Architecture: armhf
Multi-Arch: foreign
Source: mawk (1.3.3-17)
Version: 1.3.3-17+b3
Provides: awk
Pre-Depends: libc6 (>= 2.11)
Description: a pattern scanning and text processing language
 Mawk is an interpreter for the AWK Programming Language. The AWK
 language is useful for manipulation of data files, text retrieval and
 processing, and for prototyping and experimenting with algorithms. Mawk
 is a new awk meaning it implements the AWK language as defined in Aho,
 Kernighan and Weinberger, The AWK Programming Language, Addison-Wesley
 Publishing, 1988. (Hereafter referred to as the AWK book.) Mawk conforms
 to the POSIX 1003.2 (draft 11.3) definition of the AWK language
 which contains a few features not described in the AWK book, and mawk
 provides a small number of extensions.
 .
 Mawk is smaller and much faster than gawk. It has some compile-time
 limits such as NF = 32767 and sprintf buffer = 1020.

Package: cryptsetup
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 351
Maintainer: Debian Cryptsetup Team <pkg-cryptsetup-devel@lists.alioth.debian.org>
Architecture: armhf
Version: 2:1.7.3-4
Replaces: cryptsetup-luks, hashalot (<< 0.3-2)
Provides: cryptsetup-luks
Depends: libc6 (>= 2.15), debconf (>= 0.5) | debconf-2.0, dmsetup, cryptsetup-bin (>= 2:1.6.0)
Recommends: kbd, console-setup, initramfs-tools (>= 0.129) | linux-initramfs-tool, busybox | busybox-static
Suggests: dosfstools, liblocale-gettext-perl, keyutils
Breaks: hashalot (<< 0.3-2)
Conflicts: cryptsetup-luks
Conffiles:
 /etc/cryptsetup-initramfs/conf-hook 7c1314c3f6ebb652e75fd5787206c47f
 /etc/default/cryptdisks 756141f7eacf1a272a2f6e51646b3aa4
 /etc/init.d/cryptdisks 20b58baefc1aed5021a28e2fb9439edd
 /etc/init.d/cryptdisks-early 9c58f4b1314fe50c79ec0caff22bf298
 /etc/init/cryptdisks-udev.conf ed789690d1770e3f3a2682c11e359bb6
 /etc/init/cryptdisks.conf e5527ceb5c020174a6464b81126bb5f7
Description: disk encryption support - startup scripts
 Cryptsetup provides an interface for configuring encryption on block
 devices (such as /home or swap partitions), using the Linux kernel
 device mapper target dm-crypt. It features integrated Linux Unified Key
 Setup (LUKS) support.
 .
 Cryptsetup is backwards compatible with the on-disk format of cryptoloop,
 but also supports more secure formats. This package includes support for
 automatically configuring encrypted devices at boot time via the config
 file /etc/crypttab. Additional features are cryptoroot support through
 initramfs-tools and several supported ways to read a passphrase or key.
Homepage: https://gitlab.com/cryptsetup/cryptsetup

Package: gzip
Essential: yes
Status: install ok installed
Priority: required
Section: utils
Installed-Size: 197
Maintainer: Bdale Garbee <bdale@gag.com>
Architecture: armhf
Source: gzip (1.6-5)
Version: 1.6-5+b1
Depends: dpkg (>= 1.15.4) | install-info
Pre-Depends: libc6 (>= 2.17)
Suggests: less
Description: GNU compression utilities
 This package provides the standard GNU file compression utilities, which
 are also the default compression tools for Debian.  They typically operate
 on files with names ending in '.gz', but can also decompress files ending
 in '.Z' created with 'compress'.

Package: dump
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 293
Maintainer: Alexander Zangerl <az@debian.org>
Architecture: armhf
Version: 0.4b46-3
Depends: e2fslibs (>= 1.37), libblkid1 (>= 2.16), libbz2-1.0, libc6 (>= 2.15), libcomerr2 (>= 1.01), liblzo2-2, libreadline7 (>= 6.0), libselinux1 (>= 1.32), zlib1g (>= 1:1.1.4), tar (>= 1.13.92-3)
Description: 4.4bsd dump and restore for ext2 filesystems
 Dump examines files on a filesystem and determines which files need to be
 backed up. These files are copied to the given disk, tape or other storage
 medium for safe keeping.
 .
 The restore command performs the inverse function of dump. A full backup of
 a filesystem may be restored and subsequent incremental backups layered on
 top of it.  Single files and directory subtrees may be restored from full or
 partial backups.
Homepage: http://dump.sourceforge.net

Package: libelf1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 901
Maintainer: Kurt Roeckx <kurt@roeckx.be>
Architecture: armhf
Multi-Arch: same
Source: elfutils
Version: 0.168-1
Depends: libc6 (>= 2.4), zlib1g (>= 1:1.1.4)
Description: library to read and write ELF files
 The libelf1 package provides a shared library which allows reading and
 writing ELF files on a high level.  Third party programs depend on
 this package to read internals of ELF files.  The programs of the
 elfutils package use it also to generate new ELF files.
 .
 This library is part of elfutils.
Homepage: https://sourceware.org/elfutils/

Package: blktrace
Status: install ok installed
Priority: extra
Section: utils
Installed-Size: 915
Maintainer: Bas Zoetekouw <bas@debian.org>
Architecture: armhf
Version: 1.1.0-2+deb9u1
Depends: libaio1 (>= 0.3.93), libc6 (>= 2.15), python, lsb-base
Recommends: libtheora-bin, libav-tools, librsvg2-bin
Suggests: gnuplot-x11
Conffiles:
 /etc/init.d/mountdebugfs bdb3b95cf774632dd67d2933df0a1ecc
Description: utilities for block layer IO tracing
 blktrace is a block layer IO tracing mechanism which provides detailed
 information about request queue operations up to user space. There are
 three major components that are provided:
 .
 blktrace: A utility which transfers event traces from the kernel
 into either long-term on-disk storage, or provides direct formatted
 output (via blkparse).
 .
 blkparse: A utility which formats events stored in files, or when
 run in live mode directly outputs data collected by blktrace.
 .
 iowatcher: A utility to visualize block I/O patterns. It generates graphs
 from blktrace runs to help visualize IO patterns and performance. It can
 plot multiple blktrace runs together, making it easy to compare the
 differences between different benchmark runs.
Homepage: http://brick.kernel.dk/snaps/

Package: libglib2.0-0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 3944
Maintainer: Debian GNOME Maintainers <pkg-gnome-maintainers@lists.alioth.debian.org>
Architecture: armhf
Multi-Arch: same
Source: glib2.0
Version: 2.50.3-2
Depends: libc6 (>= 2.17), libffi6 (>= 3.0.4), libmount1 (>= 2.20.1), libpcre3, libselinux1 (>= 1.32), zlib1g (>= 1:1.2.2)
Recommends: libglib2.0-data, shared-mime-info, xdg-user-dirs
Breaks: glib-networking (<< 2.33.12), libgnome-desktop-3-2 (<< 3.4.2-2), python-gi (<< 3.7.2)
Description: GLib library of C routines
 GLib is a library containing many useful C routines for things such
 as trees, hashes, lists, and strings.  It is a useful general-purpose
 C library used by projects such as GTK+, GIMP, and GNOME.
 .
 This package contains the shared libraries.
Homepage: http://www.gtk.org/

Package: gpgv
Status: install ok installed
Priority: important
Section: utils
Installed-Size: 572
Maintainer: Debian GnuPG Maintainers <pkg-gnupg-maint@lists.alioth.debian.org>
Architecture: armhf
Multi-Arch: foreign
Source: gnupg2
Version: 2.1.18-8~deb9u3
Replaces: gnupg2 (<< 2.0.21-2), gpgv2 (<< 2.1.11-7+exp1)
Depends: libbz2-1.0, libc6 (>= 2.7), libgcrypt20 (>= 1.7.0), libgpg-error0 (>= 1.14), zlib1g (>= 1:1.1.4)
Suggests: gnupg
Breaks: gnupg2 (<< 2.0.21-2), gpgv2 (<< 2.1.11-7+exp1), python-debian (<< 0.1.29)
Description: GNU privacy guard - signature verification tool
 GnuPG is GNU's tool for secure communication and data storage.
 .
 gpgv is actually a stripped-down version of gpg which is only able
 to check signatures. It is somewhat smaller than the fully-blown gpg
 and uses a different (and simpler) way to check that the public keys
 used to make the signature are valid. There are no configuration
 files and only a few options are implemented.
Homepage: https://www.gnupg.org/

Package: libcap2
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 38
Maintainer: Christian Kastner <ckk@debian.org>
Architecture: armhf
Multi-Arch: same
Version: 1:2.25-1
Depends: libc6 (>= 2.8)
Description: POSIX 1003.1e capabilities (library)
 Libcap implements the user-space interfaces to the POSIX 1003.1e capabilities
 available in Linux kernels. These capabilities are a partitioning of the all
 powerful root privilege into a set of distinct privileges.
 .
 This package contains the shared library.
Homepage: http://sites.google.com/site/fullycapable/

Package: bsdutils
Essential: yes
Status: install ok installed
Priority: required
Section: utils
Installed-Size: 205
Maintainer: Debian util-linux Maintainers <ah-util-linux@debian.org>
Architecture: armhf
Multi-Arch: foreign
Source: util-linux (2.29.2-1+deb9u1)
Version: 1:2.29.2-1+deb9u1
Replaces: bash-completion (<< 1:2.1-4.1~)
Pre-Depends: libc6 (>= 2.16), libsystemd0
Recommends: bsdmainutils
Breaks: bash-completion (<< 1:2.1-4.1~)
Description: basic utilities from 4.4BSD-Lite
 This package contains the bare minimum of BSD utilities needed for a
 Debian system: logger, renice, script, scriptreplay, and wall. The
 remaining standard BSD utilities are provided by bsdmainutils.

Package: dash
Essential: yes
Status: install ok installed
Priority: required
Section: shells
Installed-Size: 163
Maintainer: Gerrit Pape <pape@smarden.org>
Architecture: armhf
Version: 0.5.8-2.4
Depends: debianutils (>= 2.15), dpkg (>= 1.15.0)
Pre-Depends: libc6 (>= 2.11)
Description: POSIX-compliant shell
 The Debian Almquist Shell (dash) is a POSIX-compliant shell derived
 from ash.
 .
 Since it executes scripts faster than bash, and has fewer library
 dependencies (making it more robust against software or hardware
 failures), it is used as the default system shell on Debian systems.
Homepage: http://gondor.apana.org.au/~herbert/dash/

Package: libf2fs-format4
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 46
Maintainer: Filesystems Group <filesystems-devel@lists.alioth.debian.org>
Architecture: armhf
Multi-Arch: same
Source: f2fs-tools
Version: 1.11.0-1~bpo9+1
Depends: libblkid1 (>= 2.17.2), libc6 (>= 2.10), libf2fs5, libuuid1 (>= 2.16)
Description: Format library for Flash-Friendly File System
 F2FS is a new filesystem for Linux aimed at NAND flash memory-based storage
 devices, such as SSD, eMMC, and SD cards. It is based on Log-structured File
 System (LFS).
 .
 This package contains the format f2fs library.
Homepage: http://git.kernel.org/cgit/linux/kernel/git/jaegeuk/f2fs-tools.git

Package: gcc-6-base
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 209
Maintainer: Debian GCC Maintainers <debian-gcc@lists.debian.org>
Architecture: armhf
Multi-Arch: same
Source: gcc-6
Version: 6.3.0-18+deb9u1
Breaks: gcc-4.4-base (<< 4.4.7), gcc-4.7-base (<< 4.7.3), gcj-4.4-base (<< 4.4.6-9~), gcj-4.6-base (<< 4.6.1-4~), gnat-4.4-base (<< 4.4.6-3~), gnat-4.6 (<< 4.6.1-5~)
Description: GCC, the GNU Compiler Collection (base package)
 This package contains files common to all languages and libraries
 contained in the GNU Compiler Collection (GCC).
Homepage: http://gcc.gnu.org/

Package: libsasl2-modules-db
Status: install ok installed
Priority: standard
Section: libs
Installed-Size: 88
Maintainer: Debian Cyrus SASL Team <pkg-cyrus-sasl2-debian-devel@lists.alioth.debian.org>
Architecture: armhf
Multi-Arch: same
Source: cyrus-sasl2
Version: 2.1.27~101-g0780600+dfsg-3
Depends: libc6 (>= 2.4), libdb5.3
Description: Cyrus SASL - pluggable authentication modules (DB)
 This is the Cyrus SASL API implementation, version 2.1. See package
 libsasl2-2 and RFC 2222 for more information.
 .
 This package provides the DB plugin, which supports Berkeley DB lookups.
Homepage: https://www.cyrusimap.org/

Package: linux-base
Status: install ok installed
Priority: optional
Section: kernel
Installed-Size: 61
Maintainer: Debian Kernel Team <debian-kernel@lists.debian.org>
Architecture: all
Multi-Arch: foreign
Version: 4.5
Depends: debconf (>= 0.5) | debconf-2.0
Description: Linux image base package
 This package contains files and support scripts for all Linux
 images.

Package: mount
Essential: yes
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 357
Maintainer: Debian util-linux Maintainers <ah-util-linux@debian.org>
Architecture: armhf
Multi-Arch: foreign
Source: util-linux
Version: 2.29.2-1+deb9u1
Replaces: bash-completion (<< 1:2.1-4.3~)
Pre-Depends: libblkid1 (>= 2.17.2), libc6 (>= 2.17), libmount1 (>= 2.25), libselinux1 (>= 2.6-3~), libsmartcols1 (>= 2.28~rc1), libudev1 (>= 183)
Suggests: nfs-common (>= 1:1.1.0-13)
Breaks: bash-completion (<< 1:2.1-4.3~)
Description: tools for mounting and manipulating filesystems
 This package provides the mount(8), umount(8), swapon(8),
 swapoff(8), and losetup(8) commands.

Package: libgnutls30
Status: install ok installed
Priority: standard
Section: libs
Installed-Size: 1944
Maintainer: Debian GnuTLS Maintainers <pkg-gnutls-maint@lists.alioth.debian.org>
Architecture: armhf
Multi-Arch: same
Source: gnutls28
Version: 3.5.8-5+deb9u4
Depends: libc6 (>= 2.22), libgmp10 (>= 2:6), libhogweed4, libidn11 (>= 1.13), libnettle6, libp11-kit0 (>= 0.23.1), libtasn1-6 (>= 4.9), zlib1g (>= 1:1.1.4)
Suggests: gnutls-bin
Description: GNU TLS library - main runtime library
 GnuTLS is a portable library which implements the Transport Layer
 Security (TLS 1.0, 1.1, 1.2) and Secure Sockets Layer (SSL) 3.0 and Datagram
 Transport Layer Security (DTLS 1.0, 1.2) protocols.
 .
 GnuTLS features support for:
  - TLS extensions: server name indication, max record size, opaque PRF
    input, etc.
  - authentication using the SRP protocol.
  - authentication using both X.509 certificates and OpenPGP keys.
  - TLS Pre-Shared-Keys (PSK) extension.
  - Inner Application (TLS/IA) extension.
  - X.509 and OpenPGP certificate handling.
  - X.509 Proxy Certificates (RFC 3820).
  - all the strong encryption algorithms (including SHA-256/384/512 and
    Camellia (RFC 4132)).
 .
 This package contains the main runtime library.
Homepage: http://www.gnutls.org/

Package: libsasl2-2
Status: install ok installed
Priority: standard
Section: libs
Installed-Size: 142
Maintainer: Debian Cyrus SASL Team <pkg-cyrus-sasl2-debian-devel@lists.alioth.debian.org>
Architecture: armhf
Multi-Arch: same
Source: cyrus-sasl2
Version: 2.1.27~101-g0780600+dfsg-3
Replaces: libsasl2
Depends: libsasl2-modules-db (>= 2.1.27~101-g0780600+dfsg-3), libc6 (>= 2.15)
Recommends: libsasl2-modules (>= 2.1.27~101-g0780600+dfsg-3)
Breaks: postfix (<= 2.8.3-1), slapd (<= 2.4.25-3)
Description: Cyrus SASL - authentication abstraction library
 This is the Cyrus SASL API implementation, version 2.1.
 .
 SASL is the Simple Authentication and Security Layer, a method for
 adding authentication support to connection-based protocols. To use
 SASL, a protocol includes a command for identifying and
 authenticating a user to a server and for optionally negotiating
 protection of subsequent protocol interactions. If its use is
 negotiated, a security layer is inserted between the protocol and the
 connection. See RFC 2222 for more information.
 .
 Any of: ANONYMOUS, CRAM-MD5, DIGEST-MD5, GSSAPI (MIT or Heimdal
 Kerberos 5), NTLM, OTP, PLAIN, or LOGIN can be used.
Homepage: https://www.cyrusimap.org/

Package: libsystemd0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 459
Maintainer: Debian systemd Maintainers <pkg-systemd-maintainers@lists.alioth.debian.org>
Architecture: armhf
Multi-Arch: same
Source: systemd
Version: 232-25+deb9u6
Pre-Depends: libc6 (>= 2.17), libgcc1 (>= 1:3.5), libgcrypt20 (>= 1.7.0), liblz4-1 (>= 0.0~r113), liblzma5 (>= 5.1.1alpha+20120614), libselinux1 (>= 2.1.9)
Description: systemd utility library
 The libsystemd0 library provides interfaces to various systemd components.
Homepage: https://www.freedesktop.org/wiki/Software/systemd

Package: libdns-export162
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 1457
Maintainer: LaMont Jones <lamont@debian.org>
Architecture: armhf
Source: bind9
Version: 1:9.10.3.dfsg.P4-12.3+deb9u4
Depends: libc6 (>= 2.4), libisc-export160, libssl1.0.2 (>= 1.0.2d)
Description: Exported DNS Shared Library
 The Berkeley Internet Name Domain (BIND) implements an Internet domain
 name server.  BIND is the most widely-used name server software on the
 Internet, and is supported by the Internet Software Consortium, www.isc.org.
 .
 This package delivers the exported libdns shared library.

Package: nbd-server
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 140
Maintainer: Wouter Verhelst <wouter@debian.org>
Architecture: armhf
Source: nbd
Version: 1:3.15.2-3
Depends: libc6 (>= 2.15), libglib2.0-0 (>= 2.26.0), libgnutls30 (>= 3.5.6), debconf (>= 1.2.9) | debconf-2.0, ucf, adduser
Conffiles:
 /etc/init.d/nbd-server 33e9d3e9da219228f8bfe7f18c4f3feb
Description: Network Block Device protocol - server
 Network Block Device (NBD) is a client/server protocol that
 emulates a block device (such as a hard disk, a floppy, or a CD-ROM)
 over the network, thus giving the system the ability to swap over the
 network, or to use raw network disk space for other purposes.
 .
 However, writing to one Network Block Device from different clients
 simultaneously is not recommended, and would probably result in data
 loss. If you want multiple clients to share a remote resource, use a
 network file system such as NFS or Coda.
 .
 This package provides the server binary for NBD.
Homepage: http://nbd.sourceforge.net/

Package: keyutils
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 108
Maintainer: Christian Kastner <ckk@debian.org>
Architecture: armhf
Multi-Arch: foreign
Version: 1.5.9-9
Depends: libc6 (>= 2.15), libkeyutils1 (>= 1.5.9)
Conffiles:
 /etc/request-key.conf bf33ebef2dd99b739d06c67976d549fd
Description: Linux Key Management Utilities
 Keyutils is a set of utilities for managing the key retention facility in the
 kernel, which can be used by filesystems, block devices and more to gain and
 retain the authorization and encryption keys required to perform secure
 operations.
Homepage: http://people.redhat.com/~dhowells/keyutils/

Package: libc6
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 8380
Maintainer: GNU Libc Maintainers <debian-glibc@lists.debian.org>
Architecture: armhf
Multi-Arch: same
Source: glibc
Version: 2.24-11+deb9u3
Depends: libgcc1
Suggests: glibc-doc, debconf | debconf-2.0, libc-l10n, locales
Breaks: hurd (<< 1:0.5.git20140203-1), libtirpc1 (<< 0.2.3), locales (<< 2.24), locales-all (<< 2.24), nscd (<< 2.24)
Conffiles:
 /etc/ld.so.conf.d/arm-linux-gnueabihf.conf fcce838d54cc444500f01049db2aae8c
Description: GNU C Library: Shared libraries
 Contains the standard libraries that are used by nearly all programs on
 the system. This package includes shared versions of the standard C library
 and the standard math library, as well as many others.
Homepage: http://www.gnu.org/software/libc/libc.html

Package: python2.7
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 359
Maintainer: Matthias Klose <doko@debian.org>
Architecture: armhf
Multi-Arch: allowed
Version: 2.7.13-2+deb9u3
Replaces: python-profiler (<= 2.7.1-2), python2.7-minimal (<< 2.7.3-7~)
Depends: python2.7-minimal (= 2.7.13-2+deb9u3), libpython2.7-stdlib (= 2.7.13-2+deb9u3), mime-support
Suggests: python2.7-doc, binutils
Breaks: python-virtualenv (<< 1.7.1.2-2~), vim-athena (<< 2:7.3.547-4), vim-gnome (<< 2:7.3.547-4), vim-gtk (<< 2:7.3.547-4), vim-nox (<< 2:7.3.547-4)
Conflicts: python-profiler (<= 2.7.1-2)
Description: Interactive high-level object-oriented language (version 2.7)
 Python is a high-level, interactive, object-oriented language. Its 2.7 version
 includes an extensive class library with lots of goodies for
 network programming, system administration, sounds and graphics.

Package: libjs-sphinxdoc
Status: install ok installed
Priority: optional
Section: web
Installed-Size: 129
Maintainer: Debian Python Modules Team <python-modules-team@lists.alioth.debian.org>
Architecture: all
Multi-Arch: foreign
Source: sphinx
Version: 1.4.9-2
Depends: libjs-jquery (>= 1.11.1), libjs-underscore (>= 1.3.1)
Description: JavaScript support for Sphinx documentation
 Sphinx is a tool for producing documentation for Python projects, using
 reStructuredText as markup language.
 .
 This package provides JavaScript code for documentation generated by Sphinx.
Homepage: http://sphinx-doc.org/

Package: libnss3
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 2180
Maintainer: Maintainers of Mozilla-related packages <pkg-mozilla-maintainers@lists.alioth.debian.org>
Architecture: armhf
Multi-Arch: same
Source: nss
Version: 2:3.26.2-1.1+deb9u1
Depends: libc6 (>= 2.4), libnspr4 (>= 2:4.12), libsqlite3-0 (>= 3.5.9), zlib1g (>= 1:1.1.4)
Conflicts: libnss3-1d (<< 2:3.13.4-2)
Description: Network Security Service libraries
 This is a set of libraries designed to support cross-platform development
 of security-enabled client and server applications. It can support SSLv2
 and  v4, TLS, PKCS #5, #7, #11, #12, S/MIME, X.509 v3 certificates and
 other security standards.
Homepage: http://www.mozilla.org/projects/security/pki/nss/

Package: libfdisk1
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 348
Maintainer: Debian util-linux Maintainers <ah-util-linux@debian.org>
Architecture: armhf
Multi-Arch: same
Source: util-linux
Version: 2.29.2-1+deb9u1
Depends: libblkid1 (>= 2.24.2), libc6 (>= 2.17), libuuid1 (>= 2.16)
Description: fdisk partitioning library
 The libfdisk library is used for manipulating partition tables. It is
 the core of the fdisk, cfdisk, and sfdisk tools.

Package: nfs-kernel-server
Status: install ok installed
Priority: optional
Section: net
Installed-Size: 239
Maintainer: Debian kernel team <debian-kernel@lists.debian.org>
Architecture: armhf
Source: nfs-utils
Version: 1:1.3.4-2.1
Replaces: knfs, nfs-server
Provides: knfs, nfs-server
Depends: libblkid1 (>= 2.16), libc6 (>= 2.15), libcap2 (>= 1:2.10), libsqlite3-0 (>= 3.5.9), libtirpc1 (>= 0.2.4), libwrap0 (>= 7.6-4~), init-system-helpers (>= 1.18~), nfs-common (= 1:1.3.4-2.1), ucf, netbase, lsb-base (>= 1.3-9ubuntu3), keyutils
Conflicts: knfs, nfs-server
Conffiles:
 /etc/init.d/nfs-kernel-server 18f6ff3495106897ac4dfdc0af1b369a
Description: support for NFS kernel server
 The NFS kernel server is currently the recommended NFS server for use
 with Linux, featuring features such as NFSv3 and NFSv4, Kerberos
 support via GSS, and much more. It is also significantly faster and
 usually more reliable than the user-space NFS servers (from the
 unfs3 and nfs-user-server packages). However, it is more difficult to
 debug than the user-space servers, and has a slightly different
 feature set.
 .
 This package contains the user-space support needed to use the
 NFS kernel server. Most administrators wishing to set up an NFS server
 would want to install this package.
Homepage: http://nfs.sourceforge.net/

Package: initramfs-tools
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 105
Maintainer: Debian kernel team <debian-kernel@lists.debian.org>
Architecture: all
Multi-Arch: foreign
Version: 0.130
Provides: linux-initramfs-tool
Depends: initramfs-tools-core (= 0.130), linux-base
Suggests: bash-completion
Breaks: console-setup (<< 1.72), cryptsetup (<< 2:1.6.6-4~), e2fsprogs (<< 1.42.13), elilo (<< 3.12-3.1~), initscripts (<< 2.88dsf-59.3~), lilo (<< 22.8-8.2~), lvm2 (<< 2.02.111-2.1~), s390-tools (<< 1.8.3-2~), systemd-sysv (<< 186), upstart
Conflicts: linux-initramfs-tool, usplash (<< 0.5.50)
Conffiles:
 /etc/initramfs-tools/update-initramfs.conf e2026d4603e7161efaccca519aeb1297
 /etc/kernel/postinst.d/initramfs-tools f9dcd9b9d4b6aa84c18407f2aeecb096
 /etc/kernel/postrm.d/initramfs-tools f57d0b03f79fd46dd1a1fa3b00206070
Description: generic modular initramfs generator (automation)
 This package builds a bootable initramfs for Linux kernel packages.  The
 initramfs is loaded along with the kernel and is responsible for
 mounting the root filesystem and starting the main init system.

Package: libpcre3
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 524
Maintainer: Matthew Vernon <matthew@debian.org>
Architecture: armhf
Multi-Arch: same
Source: pcre3
Version: 2:8.39-3
Depends: libc6 (>= 2.4)
Pre-Depends: multiarch-support
Breaks: approx (<< 4.4-1~), cduce (<< 0.5.3-2~), cmigrep (<< 1.5-7~), galax (<< 1.1-7~), libpcre-ocaml (<< 6.0.1~), liquidsoap (<< 0.9.2-3~), ocsigen (<< 1.3.3-1~)
Conflicts: libpcre3-dev (<= 4.3-3)
Description: Old Perl 5 Compatible Regular Expression Library - runtime files
 This is a library of functions to support regular expressions whose syntax
 and semantics are as close as possible to those of the Perl 5 language.
 .
 New packages should use the newer pcre2 packages, and existing
 packages should migrate to pcre2.
 .
 This package contains the runtime libraries.

Package: librtmp1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 105
Maintainer: Debian Multimedia Maintainers <pkg-multimedia-maintainers@lists.alioth.debian.org>
Architecture: armhf
Multi-Arch: same
Source: rtmpdump (2.4+20151223.gitfa8646d.1-1)
Version: 2.4+20151223.gitfa8646d.1-1+b1
Depends: libc6 (>= 2.7), libgmp10, libgnutls30 (>= 3.5.6), libhogweed4, libnettle6, zlib1g (>= 1:1.1.4)
Description: toolkit for RTMP streams (shared library)
 A small dumper for media content streamed over the RTMP protocol (like BBC's
 iPlayer high quality streams). Supplying an RTMP URL will result in a dumped
 flv file, which can be played/transcoded with standard tools.
 .
 This package contains the shared libraries, header files needed by
 programs that want to use librtmp.
Homepage: http://rtmpdump.mplayerhq.hu/

Package: libdevmapper1.02.1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 303
Maintainer: Debian LVM Team <pkg-lvm-maintainers@lists.alioth.debian.org>
Architecture: armhf
Multi-Arch: same
Source: lvm2 (2.02.168-2)
Version: 2:1.02.137-2
Depends: libc6 (>= 2.22), libselinux1 (>= 1.32), libudev1 (>= 183), dmsetup (>= 2:1.02.137-2)
Breaks: liblvm2app2.2 (<< 2.02.122), lvm2 (<< 2.02.122)
Conflicts: libdevmapper1.02
Description: Linux Kernel Device Mapper userspace library
 The Linux Kernel Device Mapper is the LVM (Linux Logical Volume Management)
 Team's implementation of a minimalistic kernel-space driver that handles
 volume management, while keeping knowledge of the underlying device layout
 in user-space.  This makes it useful for not only LVM, but software raid,
 and other drivers that create "virtual" block devices.
 .
 This package contains the (user-space) shared library for accessing the
 device-mapper; it allows usage of the device-mapper through a clean,
 consistent interface (as opposed to through kernel ioctls).
Homepage: http://sources.redhat.com/lvm2/

Package: parted
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 252
Maintainer: Parted Maintainer Team <parted-maintainers@lists.alioth.debian.org>
Architecture: armhf
Version: 3.2-17
Replaces: fsresize, parted1.6
Depends: libc6 (>= 2.11), libparted2 (= 3.2-17), libreadline7 (>= 6.0), libtinfo5 (>= 6)
Suggests: parted-doc
Conflicts: fsresize, parted1.6
Description: disk partition manipulator
 GNU Parted is a program that allows you to create, destroy, resize,
 move, and copy disk partitions. This is useful for creating space
 for new operating systems, reorganizing disk usage, and copying data
 to new hard disks.
 .
 This package contains the binary and manual page. Further
 documentation is available in parted-doc.
 .
 Parted currently supports DOS, Mac, Sun, BSD, GPT, MIPS, and PC98
 partitioning formats, as well as a "loop" (raw disk) type which
 allows use on RAID/LVM. It can detect and remove ASFS/AFFS/APFS,
 Btrfs, ext2/3/4, FAT16/32, HFS, JFS, linux-swap, UFS, XFS, and ZFS
 file systems. Parted also has the ability to create and modify file
 systems of some of these types, but using it to perform file system
 operations is now deprecated.
 .
 The nature of this software means that any bugs could cause massive
 data loss. While there are no such bugs known at the moment, they
 could exist, so please back up all important files before running
 it, and do so at your own risk.
Homepage: http://www.gnu.org/software/parted

Package: coreutils
Essential: yes
Status: install ok installed
Priority: required
Section: utils
Installed-Size: 13454
Maintainer: Michael Stone <mstone@debian.org>
Architecture: armhf
Multi-Arch: foreign
Version: 8.26-3
Replaces: mktemp, realpath, timeout
Pre-Depends: libacl1 (>= 2.2.51-8), libattr1 (>= 1:2.4.46-8), libc6 (>= 2.17), libselinux1 (>= 2.1.13)
Conflicts: timeout
Description: GNU core utilities
 This package contains the basic file, shell and text manipulation
 utilities which are expected to exist on every operating system.
 .
 Specifically, this package includes:
 arch base64 basename cat chcon chgrp chmod chown chroot cksum comm cp
 csplit cut date dd df dir dircolors dirname du echo env expand expr
 factor false flock fmt fold groups head hostid id install join link ln
 logname ls md5sum mkdir mkfifo mknod mktemp mv nice nl nohup nproc numfmt
 od paste pathchk pinky pr printenv printf ptx pwd readlink realpath rm
 rmdir runcon sha*sum seq shred sleep sort split stat stty sum sync tac
 tail tee test timeout touch tr true truncate tsort tty uname unexpand
 uniq unlink users vdir wc who whoami yes
Homepage: http://gnu.org/software/coreutils

Package: ed
Status: install ok installed
Priority: optional
Section: editors
Installed-Size: 83
Maintainer: Martin Zobel-Helas <zobel@debian.org>
Architecture: armhf
Multi-Arch: foreign
Version: 1.10-2.1
Depends: libc6 (>= 2.11)
Description: classic UNIX line editor
 ed is a line-oriented text editor.  It is used to
 create, display, modify and otherwise manipulate text
 files.
 .
 red is a restricted ed: it can only edit files in the
 current directory and cannot execute shell commands.
Homepage: http://www.gnu.org/software/ed/

Package: file
Status: install ok installed
Priority: standard
Section: utils
Installed-Size: 91
Maintainer: Christoph Biedl <debian.axhn@manchmal.in-ulm.de>
Architecture: armhf
Multi-Arch: foreign
Version: 1:5.30-1+deb9u2
Depends: libc6 (>= 2.4), libmagic1 (= 1:5.30-1+deb9u2), zlib1g (>= 1:1.1.4)
Description: Recognize the type of data in a file using "magic" numbers
 The file command is "a file type guesser", a command-line tool that
 tells you in words what kind of data a file contains.
 .
 This package contains the file program itself.
Homepage: http://www.darwinsys.com/file/

Package: gawk
Status: install ok installed
Priority: optional
Section: interpreters
Installed-Size: 1939
Maintainer: Adrian Bunk <bunk@debian.org>
Architecture: armhf
Multi-Arch: foreign
Version: 1:4.1.4+dfsg-1
Provides: awk
Pre-Depends: libc6 (>= 2.15), libgmp10, libmpfr4 (>= 3.1.3), libreadline7 (>= 6.0), libsigsegv2 (>= 2.9)
Suggests: gawk-doc
Description: GNU awk, a pattern scanning and processing language
 `awk', a program that you can use to select particular records in a
 file and perform operations upon them.
 .
 Gawk is the GNU Project's implementation of the AWK programming language.
 It conforms to the definition of the language in the POSIX 1003.2 Command
 Language And Utilities Standard. This version in turn is based on the
 description in The AWK Programming Language, by Aho, Kernighan, and
 Weinberger, with the additional features defined in the System V Release
 4 version of UNIX awk. Gawk also provides more recent Bell Labs awk
 extensions, and some GNU-specific extensions.
Homepage: http://www.gnu.org/software/gawk/

Package: iproute2
Status: install ok installed
Priority: important
Section: net
Installed-Size: 1331
Maintainer: Debian iproute2 Maintainers <ah-iproute@debian.org>
Architecture: armhf
Multi-Arch: foreign
Version: 4.9.0-1+deb9u1
Replaces: iproute
Provides: arpd
Depends: libc6 (>= 2.14), libdb5.3, libelf1 (>= 0.131), libmnl0 (>= 1.0.3-4~), libselinux1 (>= 2.0.15)
Recommends: libatm1 (>= 2.4.1-17~), libxtables12 (>= 1.6.0+snapshot20161117)
Suggests: iproute2-doc
Conflicts: arpd, iproute (<< 20130000-1)
Conffiles:
 /etc/iproute2/bpf_pinning fd070252e6e9996bd04d9d59e4ce21eb
 /etc/iproute2/ematch_map b91e7f9b26918449bade9573f8871d61
 /etc/iproute2/group 3aea2c0e0dd75e13a5f8f48f2936915f
 /etc/iproute2/nl_protos c0fc5315e2dd3c6b50f19da3678bce80
 /etc/iproute2/rt_dsfield 4c80d267a84d350d89d88774efe48a0f
 /etc/iproute2/rt_protos a4f97323f29caf9faf49596aea11d91a
 /etc/iproute2/rt_realms 7137bdf40e8d58c87ac7e3bba503767f
 /etc/iproute2/rt_scopes 6298b8df09e9bda23ea7da49021ca457
 /etc/iproute2/rt_tables a1313318d6778fe6b8c680248ef5a463
 /etc/iproute2/rt_tables.d/README 16d42be21c00b9edfae1fd4c39c15afc
Description: networking and traffic control tools
 The iproute2 suite is a collection of utilities for networking and
 traffic control.
 .
 These tools communicate with the Linux kernel via the (rt)netlink
 interface, providing advanced features not available through the
 legacy net-tools commands 'ifconfig' and 'route'.
Homepage: https://wiki.linuxfoundation.org/networking/iproute2

Package: libbsd0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 154
Maintainer: Guillem Jover <guillem@debian.org>
Architecture: armhf
Multi-Arch: same
Source: libbsd
Version: 0.8.3-1
Depends: libc6 (>= 2.17)
Description: utility functions from BSD systems - shared library
 This library provides some C functions such as strlcpy() that are commonly
 available on BSD systems but not on others like GNU systems.
 .
 For a detailed list of the provided functions, please see the libbsd-dev
 package description.
Homepage: https://libbsd.freedesktop.org/

Package: libf2fs0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 60
Maintainer: Filesystems Group <filesystems-devel@lists.alioth.debian.org>
Architecture: armhf
Multi-Arch: same
Source: f2fs-tools
Version: 1.7.0-1.1
Replaces: f2fs-tools (<< 1.6.0-1)
Depends: libc6 (>= 2.10), libuuid1 (>= 2.16)
Breaks: f2fs-tools (<< 1.6.0-1)
Description: Core libraries for Flash-Friendly File System
 F2FS is a new filesystem for Linux aimed at NAND flash memory-based storage
 devices, such as SSD, eMMC, and SD cards. It is based on Log-structured File
 System (LFS).
 .
 This package contains the core libraries.
Homepage: http://git.kernel.org/cgit/linux/kernel/git/jaegeuk/f2fs-tools.git

Package: e2fsprogs
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 1064
Maintainer: Theodore Y. Ts'o <tytso@mit.edu>
Architecture: armhf
Multi-Arch: foreign
Version: 1.44.5-1~bpo9+1
Pre-Depends: libblkid1 (>= 2.17.2), libc6 (>= 2.11), libcom-err2 (>= 1.43.9), libext2fs2 (= 1.44.5-1~bpo9+1), libss2 (>= 1.38), libuuid1 (>= 2.16)
Recommends: e2fsprogs-l10n
Suggests: gpart, parted, fuse2fs, e2fsck-static
Conffiles:
 /etc/mke2fs.conf 72b349d890a9b5cca06c7804cd0c8d1d
Description: ext2/ext3/ext4 file system utilities
 The ext2, ext3 and ext4 file systems are successors of the original ext
 ("extended") file system. They are the main file system types used for
 hard disks on Debian and other Linux systems.
 .
 This package contains programs for creating, checking, and maintaining
 ext2/3/4-based file systems.  It also includes the "badblocks" program,
 which can be used to scan for bad blocks on a disk or other storage device.
Homepage: http://e2fsprogs.sourceforge.net
Important: yes

Package: tar
Essential: yes
Status: install ok installed
Priority: required
Section: utils
Installed-Size: 2606
Maintainer: Bdale Garbee <bdale@gag.com>
Architecture: armhf
Multi-Arch: foreign
Version: 1.29b-1.1
Replaces: cpio (<< 2.4.2-39)
Pre-Depends: libacl1 (>= 2.2.51-8), libc6 (>= 2.17), libselinux1 (>= 1.32)
Suggests: bzip2, ncompress, xz-utils, tar-scripts
Breaks: dpkg-dev (<< 1.14.26)
Conflicts: cpio (<= 2.4.2-38)
Conffiles:
 /etc/rmt 3c58b7cd13da1085eff0acc6a00f43c7
Description: GNU version of the tar archiving utility
 Tar is a program for packaging a set of files as a single archive in tar
 format.  The function it performs is conceptually similar to cpio, and to
 things like PKZIP in the DOS world.  It is heavily used by the Debian package
 management system, and is useful for performing system backups and exchanging
 sets of files with others.

Package: libkrb5support0
Status: install ok installed
Priority: standard
Section: libs
Installed-Size: 137
Maintainer: Sam Hartman <hartmans@debian.org>
Architecture: armhf
Multi-Arch: same
Source: krb5
Version: 1.15-1+deb9u1
Depends: libc6 (>= 2.8), libkeyutils1 (>= 1.4)
Breaks: libgssapi-krb5-2 (<< 1.13~alpha1-1), libk5crypto3 (<< 1.13~alpha1-1), libkadm5clnt-mit9 (<< 1.13~alpha1-1), libkadm5srv-mit9 (<< 1.13~alpha1-1), libkdb5-7 (<< 1.13~alpha1-1)
Description: MIT Kerberos runtime libraries - Support library
 Kerberos is a system for authenticating users and services on a network.
 Kerberos is a trusted third-party service.  That means that there is a
 third party (the Kerberos server) that is trusted by all the entities on
 the network (users and services, usually called "principals").
 .
 This is the MIT reference implementation of Kerberos V5.
 .
 This package contains an internal runtime support library used by other
 Kerberos libraries.
Homepage: http://web.mit.edu/kerberos/

Package: libprocps6
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 96
Maintainer: Craig Small <csmall@debian.org>
Architecture: armhf
Multi-Arch: same
Source: procps
Version: 2:3.3.12-3+deb9u1
Replaces: procps (<< 1:3.3.2-1)
Depends: libc6 (>= 2.4), libsystemd0 (>= 209)
Description: library for accessing process information from /proc
 The libprocps library is a way of accessing information out of the /proc
 filesystem.
 .
 This package contains the shared libraries necessary to run programs
 compiled with libprocps.
Homepage: https://gitlab.com/procps-ng/procps

Package: libbz2-1.0
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 79
Maintainer: Anibal Monsalve Salazar <anibal@debian.org>
Architecture: armhf
Multi-Arch: same
Source: bzip2
Version: 1.0.6-8.1
Depends: libc6 (>= 2.4)
Description: high-quality block-sorting file compressor library - runtime
 This package contains libbzip2 which is used by the bzip2 compressor.
 .
 bzip2 is a freely available, patent free, high-quality data compressor.
 It typically compresses files to within 10% to 15% of the best available
 techniques, whilst being around twice as fast at compression and six
 times faster at decompression.
 .
 bzip2 compresses files using the Burrows-Wheeler block-sorting text
 compression algorithm, and Huffman coding. Compression is generally
 considerably better than that achieved by more conventional
 LZ77/LZ78-based compressors, and approaches the performance of the PPM
 family of statistical compressors.
 .
 The archive file format of bzip2 (.bz2) is incompatible with that of its
 predecessor, bzip (.bz).
Homepage: http://www.bzip.org/

Package: libnspr4
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 214
Maintainer: Maintainers of Mozilla-related packages <pkg-mozilla-maintainers@lists.alioth.debian.org>
Architecture: armhf
Multi-Arch: same
Source: nspr
Version: 2:4.12-6
Depends: libc6 (>= 2.17)
Conflicts: libnspr4-0d (<< 2:4.9-2~)
Description: NetScape Portable Runtime Library
 This library provides platform independent non-GUI operating system
 facilities including:
  * threads,
  * thread synchronisation,
  * normal file I/O and network I/O,
  * interval timing and calendar time,
  * basic memory management (malloc and free),
  * shared library linking.
Homepage: http://www.mozilla.org/projects/nspr/

Package: ucf
Status: install ok installed
Priority: standard
Section: utils
Installed-Size: 191
Maintainer: Manoj Srivastava <srivasta@debian.org>
Architecture: all
Multi-Arch: foreign
Version: 3.0036
Depends: debconf (>= 1.5.19), coreutils (>= 5.91)
Conffiles:
 /etc/ucf.conf 5565b8b26108c49ba575ba452cd69b3e
Description: Update Configuration File(s): preserve user changes to config files
 Debian policy mandates that user changes to configuration files must be
 preserved during package upgrades. The easy way to achieve this behavior
 is to make the configuration file a 'conffile', in which case dpkg
 handles the file specially during upgrades, prompting the user as
 needed.
 .
 This is appropriate only if it is possible to distribute a default
 version that will work for most installations, although some system
 administrators may choose to modify it. This implies that the
 default version will be part of the package distribution, and must
 not be modified by the maintainer scripts during installation (or at
 any other time).
 .
 This script attempts to provide conffile-like handling for files that
 may not be labelled conffiles, and are not shipped in a Debian package,
 but handled by the postinst instead. This script allows one to
 maintain files in /etc, preserving user changes and in general
 offering the same facilities while upgrading that dpkg normally
 provides for 'conffiles'.
 .
 Additionally, this script provides facilities for transitioning a
 file that had not been provided with conffile-like protection to come
 under this schema, and attempts to minimize questions asked at
 installation time. Indeed, the transitioning facility is better than the
 one offered by dpkg while transitioning a file from a non-conffile to
 conffile status.

Package: libkmod2
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 87
Maintainer: Marco d'Itri <md@linux.it>
Architecture: armhf
Multi-Arch: same
Source: kmod
Version: 23-2
Depends: libc6 (>= 2.17)
Description: libkmod shared library
 This library provides an API for insertion, removal, configuration and
 listing of kernel modules.

Package: mtd-utils
Status: install ok installed
Priority: extra
Section: utils
Installed-Size: 790
Maintainer: Riku Voipio <riku.voipio@linaro.org>
Architecture: armhf
Multi-Arch: foreign
Version: 1:2.0.0-1
Replaces: mtd-tools
Provides: mtd-tools
Depends: libc6 (>= 2.8), liblzo2-2, libuuid1 (>= 2.16), zlib1g (>= 1:1.1.4)
Description: Memory Technology Device Utilities
 Utilities for manipulating memory technology devices, such as flash
 memory, Disk-On-Chip, or ROM.  Includes mkfs.jffs2, a tool to create
 JFFS2 (journaling flash file system) filesystems.
Homepage: http://www.linux-mtd.infradead.org/

Package: libblkid1
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 261
Maintainer: Debian util-linux Maintainers <ah-util-linux@debian.org>
Architecture: armhf
Multi-Arch: same
Source: util-linux
Version: 2.29.2-1+deb9u1
Depends: libc6 (>= 2.17), libuuid1 (>= 2.16)
Description: block device ID library
 The blkid library allows system programs such as fsck and mount to
 quickly and easily find block devices by filesystem UUID or label.
 This allows system administrators to avoid specifying filesystems by
 hard-coded device names and use a logical naming system instead.

Package: libtasn1-6
Status: install ok installed
Priority: standard
Section: libs
Installed-Size: 84
Maintainer: Debian GnuTLS Maintainers <pkg-gnutls-maint@lists.alioth.debian.org>
Architecture: armhf
Multi-Arch: same
Version: 4.10-1.1+deb9u1
Depends: libc6 (>= 2.4)
Description: Manage ASN.1 structures (runtime)
 Manage ASN1 (Abstract Syntax Notation One) structures.
 The main features of this library are:
   * on-line ASN1 structure management that doesn't require any C code
     file generation.
   * off-line ASN1 structure management with C code file generation
     containing an array.
   * DER (Distinguish Encoding Rules) encoding
   * no limits for INTEGER and ENUMERATED values
 .
 This package contains runtime libraries.
Homepage: http://www.gnu.org/software/libtasn1/

Package: libmagic-mgc
Status: install ok installed
Priority: standard
Section: libs
Installed-Size: 4832
Maintainer: Christoph Biedl <debian.axhn@manchmal.in-ulm.de>
Architecture: armhf
Multi-Arch: foreign
Source: file
Version: 1:5.30-1+deb9u2
Replaces: libmagic1 (<< 1:5.28-4~)
Breaks: libmagic1 (<< 1:5.28-4~)
Description: File type determination library using "magic" numbers (compiled magic file)
 This package provides the compiled magic file "magic.mgc". It has
 been separated from libmagic1 in order to meet the multiarch
 requirements without breaking applications that expect this file
 at its absolute path.
Homepage: http://www.darwinsys.com/file/

Package: joe-jupp
Status: install ok installed
Priority: extra
Section: editors
Installed-Size: 162
Maintainer: Thorsten Glaser <tg@mirbsd.de>
Architecture: all
Source: jupp
Version: 3.1.30-1
Replaces: joe
Provides: joe
Depends: jupp (>= 3.1.30)
Conflicts: joe
Conffiles:
 /etc/jupp/jmacsrc a9f2682d803c5e2b77abc589fcf049d5
 /etc/jupp/joerc fc01ab89357297d8ba5d1e1581915e86
 /etc/jupp/jpicorc 07d711cd53ed35eb23b541db85134e07
 /etc/jupp/jstarrc 4d6a580c70bc4285920f97dcd19ae829
 /etc/jupp/rjoerc 0e01798d31544a0a58e9daff97da1f3e
Description: reimplement the joe Debian package using jupp
 This package contains symbolic links to replace the Debian joe package
 using the jupp package and implementation (both binaries and manpages).
 It also contains the appropriate conffiles and, in contrast to Debian's
 joe flavour, supports SELinux context copying (on Debian systems with
 the Linux kernel), and has many bugs fixed and makes some of jupps new
 features available to the joe, jstar, jmacs, jpico and rjoe flavours.
Homepage: https://www.mirbsd.org/jupp.htm

Package: python-minimal
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 145
Maintainer: Matthias Klose <doko@debian.org>
Architecture: armhf
Multi-Arch: allowed
Source: python-defaults
Version: 2.7.13-2
Replaces: python (<= 2.7.3-1~)
Depends: python2.7-minimal (>= 2.7.13-1~), dpkg (>= 1.13.20)
Recommends: python
Breaks: idle (<< 2.6), python (<= 2.7.3-1~), python-all (<< 2.6), python-all-dbg (<< 2.6), python-all-dev (<< 2.6), python-dbg (<< 2.6), python-dev (<< 2.6), python-examples (<< 2.6), python-support (<< 1.0.10ubuntu2), python2.5-minimal (<< 2.5.5-7), python2.6-minimal (<< 2.6.5~rc2-2), python3.1-minimal (<< 3.1.2~rc1-2)
Conflicts: python-central (<< 0.5.5)
Description: minimal subset of the Python language (default version)
 This package contains the interpreter and some essential modules.  It's used
 in the boot process for some basic tasks.
 See /usr/share/doc/python2.7-minimal/README.Debian for a list of the modules
 contained in this package.
Homepage: http://www.python.org/

Package: isc-dhcp-client
Status: install ok installed
Priority: important
Section: net
Installed-Size: 480
Maintainer: Debian ISC DHCP maintainers <pkg-dhcp-devel@lists.alioth.debian.org>
Architecture: armhf
Source: isc-dhcp
Version: 4.3.5-3+deb9u1
Provides: dhcp-client
Depends: libc6 (>= 2.15), libdns-export162, libisc-export160, debianutils (>= 2.8.2), iproute2
Recommends: isc-dhcp-common
Suggests: resolvconf, avahi-autoipd, isc-dhcp-client-ddns
Conffiles:
 /etc/dhcp/debug 521717b5f9e08db15893d3d062c59aeb
 /etc/dhcp/dhclient-exit-hooks.d/rfc3442-classless-routes 95e21c32fa7f603db75f1dc33db53cf5
 /etc/dhcp/dhclient.conf 649563ef7a61912664a400a5263958a6
Description: DHCP client for automatically obtaining an IP address
 This is the Internet Software Consortium's DHCP client.
 .
 Dynamic Host Configuration Protocol (DHCP) is a protocol like BOOTP
 (actually dhcpd includes much of the functionality of bootpd). It
 gives client machines "leases" for IP addresses and can
 automatically set their network configuration. If your machine
 depends on DHCP (especially likely if it's a workstation on a large
 network, or a laptop, or attached to a cable modem), keep this or
 another DHCP client installed.
 .
 Extra documentation can be found in the package isc-dhcp-common.
Homepage: http://www.isc.org

Package: bzip2
Status: install ok installed
Priority: standard
Section: utils
Installed-Size: 152
Maintainer: Anibal Monsalve Salazar <anibal@debian.org>
Architecture: armhf
Multi-Arch: foreign
Version: 1.0.6-8.1
Replaces: libbz2 (<< 0.9.5d-3)
Depends: libbz2-1.0 (= 1.0.6-8.1), libc6 (>= 2.4)
Suggests: bzip2-doc
Description: high-quality block-sorting file compressor - utilities
 bzip2 is a freely available, patent free, high-quality data compressor.
 It typically compresses files to within 10% to 15% of the best available
 techniques, whilst being around twice as fast at compression and six
 times faster at decompression.
 .
 bzip2 compresses files using the Burrows-Wheeler block-sorting text
 compression algorithm, and Huffman coding.  Compression is generally
 considerably better than that achieved by more conventional
 LZ77/LZ78-based compressors, and approaches the performance of the PPM
 family of statistical compressors.
 .
 The archive file format of bzip2 (.bz2) is incompatible with that of its
 predecessor, bzip (.bz).
Homepage: http://www.bzip.org/

Package: uuid-runtime
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 146
Maintainer: Debian util-linux Maintainers <ah-util-linux@debian.org>
Architecture: armhf
Multi-Arch: foreign
Source: util-linux
Version: 2.29.2-1+deb9u1
Replaces: e2fsprogs (<= 1.40.3-1ubuntu1)
Depends: adduser, passwd, init-system-helpers (>= 1.18~), libc6 (>= 2.8), libsystemd0
Pre-Depends: libuuid1 (>= 2.25-5~)
Conffiles:
 /etc/init.d/uuidd 29b6e6ae2de1365c06806e18f18d8fab
Description: runtime components for the Universally Unique ID library
 The libuuid library generates and parses 128-bit Universally Unique
 IDs (UUIDs). A UUID is an identifier that is unique within the space
 of all such identifiers across both space and time. It can be used for
 multiple purposes, from tagging objects with an extremely short lifetime
 to reliably identifying very persistent objects across a network.
 .
 See RFC 4122 for more information.
 .
 This package contains the uuidgen program and the uuidd daemon.
 .
 The uuidd daemon is used to generate UUIDs, especially time-based
 UUIDs, in a secure and guaranteed-unique fashion, even in the face of
 large numbers of threads trying to grab UUIDs running on different CPUs.
 It is used by libuuid as well as the uuidgen program.

Package: libmagic1
Status: install ok installed
Priority: standard
Section: libs
Installed-Size: 173
Maintainer: Christoph Biedl <debian.axhn@manchmal.in-ulm.de>
Architecture: armhf
Multi-Arch: same
Source: file
Version: 1:5.30-1+deb9u2
Depends: libc6 (>= 2.15), zlib1g (>= 1:1.1.4), libmagic-mgc (= 1:5.30-1+deb9u2)
Suggests: file
Conffiles:
 /etc/magic 272913026300e7ae9b5e2d51f138e674
 /etc/magic.mime 272913026300e7ae9b5e2d51f138e674
Description: Recognize the type of data in a file using "magic" numbers - library
 This library can be used to classify files according to magic number
 tests. It implements the core functionality of the file command.
Homepage: http://www.darwinsys.com/file/

Package: librados2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 4443
Maintainer: Ceph Maintainers <ceph-maintainers@lists.ceph.com>
Architecture: armhf
Source: ceph
Version: 10.2.5-7.2
Replaces: librados, librados1
Depends: libblkid1 (>= 2.16), libboost-iostreams1.62.0, libboost-random1.62.0, libboost-system1.62.0, libboost-thread1.62.0, libc6 (>= 2.15), libgcc1 (>= 1:3.5), libnspr4 (>= 2:4.9-2~), libnss3 (>= 2:3.13.4-2~), libstdc++6 (>= 6)
Conflicts: librados, librados1
Description: RADOS distributed object store client library
 RADOS is a reliable, autonomic distributed object storage cluster
 developed as part of the Ceph distributed storage system.  This is a
 shared library allowing applications to access the distributed object
 store using a simple file-like interface.
Homepage: http://ceph.com/

Package: lsb-base
Status: install ok installed
Priority: required
Section: misc
Installed-Size: 49
Maintainer: Debian LSB Team <debian-lsb@lists.debian.org>
Architecture: all
Multi-Arch: foreign
Source: lsb
Version: 9.20161125
Description: Linux Standard Base init script functionality
 The Linux Standard Base (http://www.linuxbase.org/) is a standard
 core system that third-party applications written for Linux can
 depend upon.
 .
 This package only includes the init-functions shell library, which
 may be used by other packages' initialization scripts for console
 logging and other purposes.
Homepage: http://www.linuxfoundation.org/collaborate/workgroups/lsb

Package: libhogweed4
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 179
Maintainer: Magnus Holmgren <holmgren@debian.org>
Architecture: armhf
Multi-Arch: same
Source: nettle (3.3-1)
Version: 3.3-1+b2
Depends: libc6 (>= 2.4), libgmp10 (>= 2:6.0.0), libnettle6 (= 3.3-1+b2)
Description: low level cryptographic library (public-key cryptos)
 Nettle is a cryptographic library that is designed to fit easily in more or
 less any context: In crypto toolkits for object-oriented languages (C++,
 Python, Pike, ...), in applications like LSH or GNUPG, or even in kernel
 space.
 .
 It tries to solve a problem of providing a common set of cryptographic
 algorithms for higher-level applications by implementing a
 context-independent set of cryptographic algorithms. In that light, Nettle
 doesn't do any memory allocation or I/O, it simply provides the
 cryptographic algorithms for the application to use in any environment and
 in any way it needs.
 .
 This package contains the asymmetric cryptographic algorithms, which,
 require the GNU multiple precision arithmetic library (libgmp) for
 their large integer computations.
Homepage: http://www.lysator.liu.se/~nisse/nettle/

Package: procps
Status: install ok installed
Priority: important
Section: admin
Installed-Size: 551
Maintainer: Craig Small <csmall@debian.org>
Architecture: armhf
Multi-Arch: foreign
Version: 2:3.3.12-3+deb9u1
Provides: watch
Depends: libc6 (>= 2.15), libncurses5 (>= 6), libncursesw5 (>= 6), libprocps6, libtinfo5 (>= 6), lsb-base (>= 3.0-10), init-system-helpers (>= 1.29~)
Recommends: psmisc
Breaks: guymager (<= 0.5.9-1), open-vm-tools (<= 2011.12.20-562307-1)
Conflicts: pgrep (<< 3.3-5), w-bassman (<< 1.0-3)
Conffiles:
 /etc/init.d/procps 49fbfd237be2a2f09576f1f9374580be
 /etc/sysctl.conf 36547fde818f251846b0198564060927
 /etc/sysctl.d/README.sysctl 026e08987e39bd612ae311f2d9fc2089
Description: /proc file system utilities
 This package provides command line and full screen utilities for browsing
 procfs, a "pseudo" file system dynamically generated by the kernel to
 provide information about the status of entries in its process table
 (such as whether the process is running, stopped, or a "zombie").
 .
 It contains free, kill, pkill, pgrep, pmap, ps, pwdx, skill, slabtop,
 snice, sysctl, tload, top, uptime, vmstat, w, and watch.
Homepage: https://gitlab.com/procps-ng/procps

Package: libboost-iostreams1.62.0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 120
Maintainer: Debian Boost Team <pkg-boost-devel@lists.alioth.debian.org>
Architecture: armhf
Multi-Arch: same
Source: boost1.62
Version: 1.62.0+dfsg-4
Depends: libbz2-1.0, libc6 (>= 2.4), libgcc1 (>= 1:3.5), libstdc++6 (>= 5.2), zlib1g (>= 1:1.1.4)
Description: Boost.Iostreams Library
 This package forms part of the Boost C++ Libraries collection.
 .
 Boost.Iostreams are a collection of concepts and a set of templates
 which turn models of these concepts into C++ standard library streams
 and stream buffers.
Homepage: http://www.boost.org/libs/iostreams/

Package: libgssapi-krb5-2
Status: install ok installed
Priority: standard
Section: libs
Installed-Size: 293
Maintainer: Sam Hartman <hartmans@debian.org>
Architecture: armhf
Multi-Arch: same
Source: krb5
Version: 1.15-1+deb9u1
Depends: libc6 (>= 2.8), libcomerr2 (>= 1.34), libk5crypto3 (>= 1.8+dfsg), libkeyutils1 (>= 1.4), libkrb5-3 (= 1.15-1+deb9u1), libkrb5support0 (>= 1.15~beta1)
Suggests: krb5-doc, krb5-user
Breaks: libgssglue1 (<< 0.2-2)
Conffiles:
 /etc/gss/mech.d/README 27e753ba1dc72900d2892b8efef6e35e
Description: MIT Kerberos runtime libraries - krb5 GSS-API Mechanism
 Kerberos is a system for authenticating users and services on a network.
 Kerberos is a trusted third-party service.  That means that there is a
 third party (the Kerberos server) that is trusted by all the entities on
 the network (users and services, usually called "principals").
 .
 This is the MIT reference implementation of Kerberos V5.
 .
 This package contains the runtime library for the MIT Kerberos
 implementation of GSS-API used by applications and Kerberos clients.
Homepage: http://web.mit.edu/kerberos/

Package: libdevmapper-event1.02.1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 63
Maintainer: Debian LVM Team <pkg-lvm-maintainers@lists.alioth.debian.org>
Architecture: armhf
Multi-Arch: same
Source: lvm2 (2.02.168-2)
Version: 2:1.02.137-2
Depends: libc6 (>= 2.15), libdevmapper1.02.1 (>= 2:1.02.103)
Description: Linux Kernel Device Mapper event support library
 The Linux Kernel Device Mapper is the LVM (Linux Logical Volume Management)
 Team's implementation of a minimalistic kernel-space driver that handles
 volume management, while keeping knowledge of the underlying device layout
 in user-space.  This makes it useful for not only LVM, but software raid,
 and other drivers that create "virtual" block devices.
 .
 This package contains the userspace library to help with event monitoring
 for devmapper devices, in conjunction with the dmevent daemon.
Homepage: http://sources.redhat.com/lvm2/

Package: perl
Status: install ok installed
Priority: standard
Section: perl
Installed-Size: 651
Maintainer: Niko Tyni <ntyni@debian.org>
Architecture: armhf
Multi-Arch: allowed
Version: 5.24.1-3+deb9u4
Replaces: perl-modules (<< 5.22.0~)
Depends: perl-base (= 5.24.1-3+deb9u4), perl-modules-5.24 (>= 5.24.1-3+deb9u4), libperl5.24 (= 5.24.1-3+deb9u4)
Pre-Depends: dpkg (>= 1.17.17)
Recommends: netbase, rename
Suggests: perl-doc, libterm-readline-gnu-perl | libterm-readline-perl-perl, make
Breaks: libperl-dev (<< 5.24.0~), perl-doc (<< 5.24.1-1)
Conflicts: libjson-pp-perl (<< 2.27200-2)
Conffiles:
 /etc/perl/Net/libnet.cfg fb2946cae573b8ed3d654a180d458733
 /etc/perl/sitecustomize.pl 302a28e42802e654386c5938548155a7
Description: Larry Wall's Practical Extraction and Report Language
 Perl is a highly capable, feature-rich programming language with over
 20 years of development. Perl 5 runs on over 100 platforms from
 portables to mainframes. Perl is suitable for both rapid prototyping
 and large scale development projects.
 .
 Perl 5 supports many programming styles, including procedural,
 functional, and object-oriented. In addition to this, it is supported
 by an ever-growing collection of reusable modules which accelerate
 development. Some of these modules include Web frameworks, database
 integration, networking protocols, and encryption. Perl provides
 interfaces to C and C++ for custom extension development.
Homepage: http://dev.perl.org/perl5/

Package: nvme-cli
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 252
Maintainer: Breno Leitao <leitao@debian.org>
Architecture: armhf
Version: 1.0-3
Depends: libc6 (>= 2.8), libudev1 (>= 183)
Description: userspace tooling to control NVMe drives
 NVMe is a fast, scalable, direct attached storage interface, accessing
 solid state drives through PCIe.
 .
 The nvme CLI contains core management tools with minimal dependencies.
Homepage: https://github.com/linux-nvme/nvme-cli

Package: libgpg-error0
Status: install ok installed
Priority: standard
Section: libs
Installed-Size: 543
Maintainer: Debian GnuPG Maintainers <pkg-gnupg-maint@lists.alioth.debian.org>
Architecture: armhf
Multi-Arch: same
Source: libgpg-error
Version: 1.26-2
Depends: libc6 (>= 2.15)
Description: library for common error values and messages in GnuPG components
 Library that defines common error values for all GnuPG
 components.  Among these are GPG, GPGSM, GPGME, GPG-Agent, libgcrypt,
 pinentry, SmartCard Daemon and possibly more in the future.
Homepage: https://www.gnupg.org/related_software/libgpg-error/

Package: liblvm2cmd2.02
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 1263
Maintainer: Debian LVM Team <pkg-lvm-maintainers@lists.alioth.debian.org>
Architecture: armhf
Multi-Arch: same
Source: lvm2
Version: 2.02.168-2
Depends: libblkid1 (>= 2.24.2), libc6 (>= 2.15), libdevmapper-event1.02.1 (>= 2:1.02.74), libdevmapper1.02.1 (>= 2:1.02.135), libudev1 (>= 183), dmeventd
Description: LVM2 command library
 This package contains the lvm2cmd shared library.
Homepage: http://sources.redhat.com/lvm2/

Package: libpython-stdlib
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 37
Maintainer: Matthias Klose <doko@debian.org>
Architecture: armhf
Multi-Arch: same
Source: python-defaults
Version: 2.7.13-2
Depends: libpython2.7-stdlib (>= 2.7.13-1~)
Description: interactive high-level object-oriented language (default python version)
 Python, the high-level, interactive object oriented language,
 includes an extensive class library with lots of goodies for
 network programming, system administration, sounds and graphics.
 .
 This package is a dependency package, which depends on Debian's default
 Python version (currently v2.7).
Homepage: http://www.python.org/

Package: libssl1.0.2
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 1999
Maintainer: Debian OpenSSL Team <pkg-openssl-devel@lists.alioth.debian.org>
Architecture: armhf
Multi-Arch: same
Source: openssl1.0
Version: 1.0.2l-2+deb9u3
Depends: libc6 (>= 2.16), debconf (>= 0.5) | debconf-2.0
Description: Secure Sockets Layer toolkit - shared libraries
 This package is part of the OpenSSL project's implementation of the SSL
 and TLS cryptographic protocols for secure communication over the
 Internet.
 .
 It provides the libssl and libcrypto shared libraries.
Homepage: https://www.openssl.org

Package: python-configparser
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 400
Maintainer: Agustin Henze <tin@debian.org>
Architecture: all
Source: configparser
Version: 3.3.0r2-2
Depends: python (>= 2.7), python (<< 2.8), libjs-sphinxdoc (>= 1.0)
Description: backport of the enhanced config parser introduced in Python 3.2
 The ancient ConfigParser module available in the standard library 2.x has
 seen a major update in Python 3.2. This is a backport of those changes so
 that they can be used directly in Python 2.7.
Homepage: https://bitbucket.org/ambv/configparser

Package: libsgutils2-2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 177
Maintainer: Ritesh Raj Sarraf <rrs@debian.org>
Architecture: armhf
Source: sg3-utils
Version: 1.42-2
Replaces: libsgutils2
Depends: libc6 (>= 2.7)
Suggests: sg3-utils
Conflicts: libsgutils2
Description: utilities for devices using the SCSI command set (shared libraries)
 Most OSes have SCSI pass-through interfaces that enable user space programs
 to send SCSI commands to a device and fetch the response. With SCSI to ATA
 Translation (SAT) many ATA disks now can process SCSI commands. Typically
 each utility in this package implements one SCSI command. See the draft
 standards at www.t10.org for SCSI command definitions plus SAT. ATA
 commands are defined in the draft standards at www.t13.org . For a mapping
 between supported SCSI and ATA commands and utility names in this package
 see the COVERAGE file
 .
 Shared library used by the utilities in the sg3-utils package.
Homepage: http://sg.danny.cz/sg/

Package: base-files
Essential: yes
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 333
Maintainer: Santiago Vila <sanvila@debian.org>
Architecture: armhf
Multi-Arch: foreign
Version: 9.9+deb9u6
Replaces: base, dpkg (<= 1.15.0), miscutils
Provides: base
Pre-Depends: awk
Breaks: initscripts (<< 2.88dsf-13.3), sendfile (<< 2.1b.20080616-5.2~)
Conffiles:
 /etc/debian_version 1ce3b563520791afa55a3a6df4926b7f
 /etc/dpkg/origins/debian 731423fa8ba067262f8ef37882d1e742
 /etc/host.conf 4eb63731c9f5e30903ac4fc07a7fe3d6
 /etc/issue 62dc6d46260360d4299e3a931afbdce5
 /etc/issue.net 6589b08348fd877fd34398489f62caf0
 /etc/update-motd.d/10-uname 9e1b832b7b06f566156e7c9e0548247b
Description: Debian base system miscellaneous files
 This package contains the basic filesystem hierarchy of a Debian system, and
 several important miscellaneous files, such as /etc/debian_version,
 /etc/host.conf, /etc/issue, /etc/motd, /etc/profile, and others,
 and the text of several common licenses in use on Debian systems.

Package: libgmp10
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 334
Maintainer: Debian Science Team <debian-science-maintainers@lists.alioth.debian.org>
Architecture: armhf
Multi-Arch: same
Source: gmp
Version: 2:6.1.2+dfsg-1
Depends: libc6 (>= 2.7)
Description: Multiprecision arithmetic library
 GNU MP is a programmer's library for arbitrary precision
 arithmetic (ie, a bignum package).  It can operate on signed
 integer, rational, and floating point numeric types.
 .
 It has a rich set of functions, and the functions have a regular
 interface.
Homepage: http://gmplib.org/

Package: sensible-utils
Status: install ok installed
Priority: required
Section: utils
Installed-Size: 62
Maintainer: Anibal Monsalve Salazar <anibal@debian.org>
Architecture: all
Multi-Arch: foreign
Version: 0.0.9+deb9u1
Replaces: debianutils (<= 2.32.3), manpages-pl (<= 20060617-3~)
Description: Utilities for sensible alternative selection
 This package provides a number of small utilities which are used
 by programs to sensibly select and spawn an appropriate browser,
 editor, or pager.
 .
 The specific utilities included are: sensible-browser sensible-editor
 sensible-pager

Package: libssh2-1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 196
Maintainer: Mikhail Gusarov <dottedmag@debian.org>
Architecture: armhf
Multi-Arch: same
Source: libssh2
Version: 1.7.0-1
Depends: libc6 (>= 2.4), libgcrypt20 (>= 1.7.0), zlib1g (>= 1:1.1.4)
Description: SSH2 client-side library
 libssh2 is a client-side C library implementing the SSH2 protocol.
 It supports regular terminal, SCP and SFTP (v1-v5) sessions;
 port forwarding, X11 forwarding; password, key-based and
 keyboard-interactive authentication.
 .
 This package contains the runtime library.
Homepage: http://libssh2.org/

Package: passwd
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 1979
Maintainer: Shadow package maintainers <pkg-shadow-devel@lists.alioth.debian.org>
Architecture: armhf
Multi-Arch: foreign
Source: shadow
Version: 1:4.4-4.1
Replaces: manpages-tr (<< 1.0.5), manpages-zh (<< 1.5.1-1)
Depends: libaudit1 (>= 1:2.2.1), libc6 (>= 2.8), libpam0g (>= 0.99.7.1), libselinux1 (>= 1.32), libsemanage1 (>= 2.0.3), libpam-modules
Conffiles:
 /etc/cron.daily/passwd db990990933b6f56322725223f13c2bc
 /etc/default/useradd cc9f9a7713ab62a32cd38363d958f396
 /etc/pam.d/chfn 4d466e00a348ba426130664d795e8afa
 /etc/pam.d/chpasswd 9900720564cb4ee98b7da29e2d183cb2
 /etc/pam.d/chsh a6e9b589e90009334ffd030d819290a6
 /etc/pam.d/newusers 1454e29bfa9f2a10836563e76936cea5
 /etc/pam.d/passwd eaf2ad85b5ccd06cceb19a3e75f40c63
Description: change and administer password and group data
 This package includes passwd, chsh, chfn, and many other programs to
 maintain password and group data.
 .
 Shadow passwords are supported.  See /usr/share/doc/passwd/README.Debian
Homepage: https://github.com/shadow-maint/shadow

Package: init-system-helpers
Essential: yes
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 131
Maintainer: Debian systemd Maintainers <pkg-systemd-maintainers@lists.alioth.debian.org>
Architecture: all
Multi-Arch: foreign
Version: 1.48
Replaces: sysv-rc (<< 2.88dsf-59.3~), sysvinit-utils (<< 2.88dsf-59.3)
Depends: perl-base (>= 5.20.1-3)
Breaks: systemd (<< 44-12), sysvinit-utils (<< 2.88dsf-59.3~)
Conflicts: file-rc (<< 0.8.17~), openrc (<= 0.18.3-1)
Description: helper tools for all init systems
 This package contains helper tools that are necessary for switching between
 the various init systems that Debian contains (e. g. sysvinit or
 systemd). An example is deb-systemd-helper, a script that enables systemd unit
 files without depending on a running systemd.
 .
 It also includes the "service", "invoke-rc.d", and "update-rc.d" scripts which
 provide an abstraction for enabling, disabling, starting, and stopping
 services for all supported Debian init systems as specified by the policy.
 .
 While this package is maintained by pkg-systemd-maintainers, it is NOT
 specific to systemd at all. Maintainers of other init systems are welcome to
 include their helpers in this package.

Package: ncurses-base
Essential: yes
Status: install ok installed
Priority: required
Section: misc
Installed-Size: 340
Maintainer: Craig Small <csmall@debian.org>
Architecture: all
Multi-Arch: foreign
Source: ncurses
Version: 6.0+20161126-1+deb9u2
Provides: ncurses-runtime
Breaks: ncurses-term (<< 5.7+20100313-3)
Conffiles:
 /etc/terminfo/README 45b6df19fb5e21f55717482fa7a30171
Description: basic terminal type definitions
 The ncurses library routines are a terminal-independent method of
 updating character screens with reasonable optimization.
 .
 This package contains terminfo data files to support the most common types of
 terminal, including ansi, dumb, linux, rxvt, screen, sun, vt100, vt102, vt220,
 vt52, and xterm.
Homepage: http://invisible-island.net/ncurses/

Package: libc-bin
Essential: yes
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 2802
Maintainer: GNU Libc Maintainers <debian-glibc@lists.debian.org>
Architecture: armhf
Multi-Arch: foreign
Source: glibc
Version: 2.24-11+deb9u3
Depends: libc6 (>> 2.24), libc6 (<< 2.25)
Recommends: manpages
Conffiles:
 /etc/bindresvport.blacklist 4c09213317e4e3dd3c71d74404e503c5
 /etc/default/nss d6d5d6f621fb3ead2548076ce81e309c
 /etc/gai.conf 28fa76ff5a9e0566eaa1e11f1ce51f09
 /etc/ld.so.conf 4317c6de8564b68d628c21efa96b37e4
 /etc/ld.so.conf.d/libc.conf d4d833fd095fb7b90e1bb4a547f16de6
Description: GNU C Library: Binaries
 This package contains utility programs related to the GNU C Library.
 .
  * catchsegv: catch segmentation faults in programs
  * getconf: query system configuration variables
  * getent: get entries from administrative databases
  * iconv, iconvconfig: convert between character encodings
  * ldd, ldconfig: print/configure shared library dependencies
  * locale, localedef: show/generate locale definitions
  * tzselect, zdump, zic: select/dump/compile time zones
Homepage: http://www.gnu.org/software/libc/libc.html

Package: libaio1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 29
Maintainer: Guillem Jover <guillem@debian.org>
Architecture: armhf
Multi-Arch: same
Source: libaio
Version: 0.3.110-3
Depends: libc6 (>= 2.4)
Description: Linux kernel AIO access library - shared library
 This library enables userspace to use Linux kernel asynchronous I/O
 system calls, important for the performance of databases and other
 advanced applications.
 .
 This package contains the shared library.
Homepage: https://fedorahosted.org/releases/l/i/libaio/

Package: libsemanage1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 200
Maintainer: Debian SELinux maintainers <selinux-devel@lists.alioth.debian.org>
Architecture: armhf
Multi-Arch: same
Source: libsemanage
Version: 2.6-2
Depends: libsemanage-common (= 2.6-2), libaudit1 (>= 1:2.2.1), libbz2-1.0, libc6 (>= 2.8), libselinux1 (>= 2.6), libsepol1 (>= 2.6), libustr-1.0-1 (>= 1.0.4)
Breaks: policycoreutils (<< 2.4), selinux-policy-default (<< 2:2.20140421-10~), selinux-policy-mls (<< 2:2.20140421-10~)
Description: SELinux policy management library
 This package provides the shared libraries for SELinux policy management.
 It uses libsepol for binary policy manipulation and libselinux for
 interacting with the SELinux system.  It also exec's helper programs
 for loading policy and for checking whether the file_contexts
 configuration is valid (load_policy and setfiles from
 policycoreutils) presently, although this may change at least for the
 bootstrapping case
 .
 Security-enhanced Linux is a patch of the Linux kernel and a
 number of utilities with enhanced security functionality designed to
 add mandatory access controls to Linux.  The Security-enhanced Linux
 kernel contains new architectural components originally developed to
 improve the security of the Flask operating system. These
 architectural components provide general support for the enforcement
 of many kinds of mandatory access control policies, including those
 based on the concepts of Type Enforcement, Role-based Access
 Control, and Multi-level Security.
Homepage: http://userspace.selinuxproject.org/

Package: libseccomp2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 144
Maintainer: Kees Cook <kees@debian.org>
Architecture: armhf
Multi-Arch: same
Source: libseccomp
Version: 2.3.1-2.1+deb9u1
Depends: libc6 (>= 2.4)
Description: high level interface to Linux seccomp filter
 This library provides a high level interface to constructing, analyzing
 and installing seccomp filters via a BPF passed to the Linux Kernel's
 prctl() syscall.
Homepage: https://github.com/seccomp/libseccomp

Package: udev
Status: install ok installed
Priority: important
Section: admin
Installed-Size: 6674
Maintainer: Debian systemd Maintainers <pkg-systemd-maintainers@lists.alioth.debian.org>
Architecture: armhf
Multi-Arch: foreign
Source: systemd
Version: 232-25+deb9u6
Replaces: bash-completion (<< 1:2.1), systemd (<< 232-20)
Depends: libacl1 (>= 2.2.51-8), libblkid1 (>= 2.19.1), libc6 (>= 2.17), libgcc1 (>= 1:3.5), libkmod2 (>= 5~), libselinux1 (>= 2.1.9), adduser, libudev1 (= 232-25+deb9u6), lsb-base (>= 3.0-6), util-linux (>= 2.27.1), procps
Pre-Depends: dpkg (>= 1.17.14)
Breaks: bash-completion (<< 1:2.1), consolekit (<< 0.4.6-1), ifplugd (<< 0.28-19.1~), ifupdown (<< 0.8.5~), joystick (<< 1:1.4.9-1~), kmod (<< 14), plymouth (<< 0.9.0-7), systemd (<< 232-20), usb-modeswitch (<< 2.3.0+repack0-1~)
Conflicts: hal
Conffiles:
 /etc/init.d/udev e4da2ae5c153148fad0b3f6e5e7ce61e
 /etc/init/udev.conf 41c0081f3a830e0902aaff76a53edf98
 /etc/init/udevmonitor.conf ec187fc822d47c41416e7c531c8c48dd
 /etc/init/udevtrigger.conf 651ff2421dde80be7ce7ccbf7fa8cf18
 /etc/udev/udev.conf a9c43ddab6e58eefa56db50ff44b2b46
Description: /dev/ and hotplug management daemon
 udev is a daemon which dynamically creates and removes device nodes from
 /dev/, handles hotplug events and loads drivers at boot time.
Homepage: https://www.freedesktop.org/wiki/Software/systemd

Package: libunistring0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 995
Maintainer: Andreas Rottmann <rotty@debian.org>
Architecture: armhf
Multi-Arch: same
Source: libunistring
Version: 0.9.6+really0.9.3-0.1
Depends: libc6 (>= 2.4)
Description: Unicode string library for C
 The 'libunistring' library implements Unicode strings (in the UTF-8,
 UTF-16, and UTF-32 encodings), together with functions for Unicode
 characters (character names, classifications, properties) and
 functions for string processing (formatted output, width, word
 breaks, line breaks, normalization, case folding, regular
 expressions).
 .
 This package contains the shared library.
Homepage: http://www.gnu.org/software/libunistring/

Package: libapparmor1
Status: install ok installed
Priority: extra
Section: libs
Installed-Size: 119
Maintainer: Debian AppArmor Team <pkg-apparmor-team@lists.alioth.debian.org>
Architecture: armhf
Multi-Arch: same
Source: apparmor
Version: 2.11.0-3+deb9u2
Depends: libc6 (>= 2.17)
Description: changehat AppArmor library
 This package provides the shared library used for making use of the
 AppArmor profile and changehat functionality, as well as common log
 parsing routines.
Homepage: http://apparmor.net/

Package: libldap-2.4-2
Status: install ok installed
Priority: standard
Section: libs
Installed-Size: 367
Maintainer: Debian OpenLDAP Maintainers <pkg-openldap-devel@lists.alioth.debian.org>
Architecture: armhf
Multi-Arch: same
Source: openldap
Version: 2.4.44+dfsg-5+deb9u2
Replaces: libldap-2.3-0, libldap2
Depends: libc6 (>= 2.12), libgnutls30 (>= 3.5.6), libsasl2-2, libldap-common (>= 2.4.44+dfsg-5+deb9u2)
Conflicts: ldap-utils (<= 2.1.23-1)
Description: OpenLDAP libraries
 These are the run-time libraries for the OpenLDAP (Lightweight Directory
 Access Protocol) servers and clients.
Homepage: http://www.openldap.org/

Package: kpartx
Status: install ok installed
Priority: extra
Section: admin
Installed-Size: 67
Maintainer: Debian DM Multipath Team <team+linux-blocks@tracker.debian.org>
Architecture: armhf
Source: multipath-tools
Version: 0.6.4-5+deb9u1
Replaces: multipath-tools (<< 0.4.7-3)
Depends: libc6 (>= 2.7), libdevmapper1.02.1 (>= 2:1.02.97), udev (>> 136-1), dmsetup (>= 2:1.02.24)
Description: create device mappings for partitions
 Kpartx can be used to set up device mappings for the partitions of any
 partitioned block device. It is part of the Linux multipath-tools.
Homepage: http://christophe.varoqui.free.fr/

Package: btrfs-progs
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 2509
Maintainer: Dimitri John Ledkov <xnox@debian.org>
Architecture: armhf
Version: 4.17-1~bpo9+1
Replaces: btrfs-tools (<< 4.4.1-1)
Depends: libblkid1 (>= 2.17.2), libc6 (>= 2.8), liblzo2-2, libuuid1 (>= 2.16), zlib1g (>= 1:1.2.0)
Suggests: duperemove
Breaks: btrbk (<= 0.25.0), btrfs-tools (<< 4.4.1-1), snapper (<< 0.5.4-4~)
Description: Checksumming Copy on Write Filesystem utilities
 Btrfs is a new copy on write filesystem for Linux aimed at implementing
 advanced features while focusing on fault tolerance, repair and easy
 administration.
 .
 This package contains utilities (mkfs, fsck) used to work with btrfs
 and an utility (btrfs-convert) to make a btrfs filesystem from an ext3.
Homepage: http://btrfs.wiki.kernel.org/

Package: libtirpc1
Status: install ok installed
Priority: standard
Section: libs
Installed-Size: 149
Maintainer: Anibal Monsalve Salazar <anibal@debian.org>
Architecture: armhf
Multi-Arch: same
Source: libtirpc
Version: 0.2.5-1.2+deb9u1
Depends: libc6 (>= 2.16), libcomerr2 (>= 1.01), libgssapi-krb5-2 (>= 1.14+dfsg), libk5crypto3 (>= 1.6.dfsg.2), libkrb5-3 (>= 1.6.dfsg.2)
Breaks: nfs-common (<< 1:1.2.8-7), nfs-kernel-server (<< 1:1.2.8-7)
Conffiles:
 /etc/netconfig ca8db53e3af4d735335c2607d21c7195
Description: transport-independent RPC library
 This package contains a port of Sun's transport-independent RPC library to
 Linux. The library is intended as a replacement for the RPC code in the GNU C
 library, providing among others support for RPC (and in turn, NFS) over IPv6.
Homepage: http://sourceforge.net/projects/libtirpc

Package: libssl1.1
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 2174
Maintainer: Debian OpenSSL Team <pkg-openssl-devel@lists.alioth.debian.org>
Architecture: armhf
Multi-Arch: same
Source: openssl
Version: 1.1.0f-3+deb9u2
Depends: libc6 (>= 2.16), debconf (>= 0.5) | debconf-2.0
Breaks: salt-common (<= 2016.3.3+ds-3)
Description: Secure Sockets Layer toolkit - shared libraries
 This package is part of the OpenSSL project's implementation of the SSL
 and TLS cryptographic protocols for secure communication over the
 Internet.
 .
 It provides the libssl and libcrypto shared libraries.
Homepage: https://www.openssl.org/

Package: sysvinit-utils
Essential: yes
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 100
Maintainer: Debian sysvinit maintainers <pkg-sysvinit-devel@lists.alioth.debian.org>
Architecture: armhf
Multi-Arch: foreign
Source: sysvinit
Version: 2.88dsf-59.9
Replaces: initscripts (<< 2.88dsf-59.5)
Depends: libc6 (>= 2.4), init-system-helpers (>= 1.25~), util-linux (>> 2.28-2~)
Breaks: systemd (<< 215)
Description: System-V-like utilities
 This package contains the important System-V-like utilities.
 .
 Specifically, this package includes:
 killall5, pidof
Homepage: http://savannah.nongnu.org/projects/sysvinit

Package: xz-utils
Status: install ok installed
Priority: required
Section: utils
Installed-Size: 494
Maintainer: Jonathan Nieder <jrnieder@gmail.com>
Architecture: armhf
Multi-Arch: foreign
Source: xz-utils (5.2.2-1.2)
Version: 5.2.2-1.2+b1
Replaces: lzip (<< 1.8~rc2), xz-lzma
Provides: lzma
Depends: libc6 (>= 2.17), liblzma5 (>= 5.2.2)
Breaks: lzip (<< 1.8~rc2)
Conflicts: lzma (<< 9.22-1), xz-lzma
Description: XZ-format compression utilities
 XZ is the successor to the Lempel-Ziv/Markov-chain Algorithm
 compression format, which provides memory-hungry but powerful
 compression (often better than bzip2) and fast, easy decompression.
 .
 This package provides the command line tools for working with XZ
 compression, including xz, unxz, xzcat, xzgrep, and so on. They can
 also handle the older LZMA format, and if invoked via appropriate
 symlinks will emulate the behavior of the commands in the lzma
 package.
 .
 The XZ format is similar to the older LZMA format but includes some
 improvements for general use:
 .
  * 'file' magic for detecting XZ files;
  * crc64 data integrity check;
  * limited random-access reading support;
  * improved support for multithreading (not used in xz-utils);
  * support for flushing the encoder.
Homepage: http://tukaani.org/xz/

Package: debian-archive-keyring
Status: install ok installed
Priority: important
Section: misc
Installed-Size: 118
Maintainer: Debian Release Team <packages@release.debian.org>
Architecture: all
Multi-Arch: foreign
Version: 2017.5
Depends: gpgv
Recommends: gnupg
Breaks: apt (<< 0.7.25.1)
Conffiles:
 /etc/apt/trusted.gpg.d/debian-archive-jessie-automatic.gpg 548a861c55fdf06fb9b0419c30cd33ec
 /etc/apt/trusted.gpg.d/debian-archive-jessie-security-automatic.gpg 28ffc0824518a9d42fb40e5caad7c5ef
 /etc/apt/trusted.gpg.d/debian-archive-jessie-stable.gpg 3cf5c69a2532cc3a3cba6c5bcf02cb7b
 /etc/apt/trusted.gpg.d/debian-archive-stretch-automatic.gpg c82e16869fb2d6234aff8b63fa00fb65
 /etc/apt/trusted.gpg.d/debian-archive-stretch-security-automatic.gpg 9fcd290147d1ed6b6768c1d1163f1383
 /etc/apt/trusted.gpg.d/debian-archive-stretch-stable.gpg 829333ce438185f23bd9c122a19ef25d
 /etc/apt/trusted.gpg.d/debian-archive-wheezy-automatic.gpg e5d3c1f7461bc12685f9b331c60beadd
 /etc/apt/trusted.gpg.d/debian-archive-wheezy-stable.gpg 722258fff5af68c002429c4433bd228b
Description: GnuPG archive keys of the Debian archive
 The Debian project digitally signs its Release files. This package
 contains the archive keys used for that.

Package: dc
Status: install ok installed
Priority: standard
Section: math
Installed-Size: 126
Maintainer: Ryan Kavanagh <rak@debian.org>
Architecture: armhf
Multi-Arch: foreign
Source: bc (1.06.95-9)
Version: 1.06.95-9+b3
Depends: libc6 (>= 2.4)
Description: GNU dc arbitrary precision reverse-polish calculator
 GNU dc is a reverse-polish desk calculator which supports unlimited
 precision arithmetic.  It also allows you to define and call macros.
 .
 A reverse-polish calculator stores numbers on a stack. Entering a number
 pushes it on the stack.  Arithmetic operations pop arguments off the
 stack and push the results.
Homepage: http://ftp.gnu.org/gnu/bc/

Package: libsemanage-common
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 39
Maintainer: Debian SELinux maintainers <selinux-devel@lists.alioth.debian.org>
Architecture: all
Multi-Arch: foreign
Source: libsemanage
Version: 2.6-2
Replaces: libsemanage1 (<= 2.0.41-1), libsemanage1-dev (<< 2.1.6-3~)
Breaks: libsemanage1 (<= 2.0.41-1), libsemanage1-dev (<< 2.1.6-3~)
Conffiles:
 /etc/selinux/semanage.conf f6f9b97af233c90ca127f406fb6f0932
Description: Common files for SELinux policy management libraries
 This package provides the common files used by the shared libraries
 for SELinux policy management.
 .
 Security-enhanced Linux is a patch of the Linux kernel and a
 number of utilities with enhanced security functionality designed to
 add mandatory access controls to Linux.  The Security-enhanced Linux
 kernel contains new architectural components originally developed to
 improve the security of the Flask operating system. These
 architectural components provide general support for the enforcement
 of many kinds of mandatory access control policies, including those
 based on the concepts of Type Enforcement, Role-based Access
 Control, and Multi-level Security.
Homepage: http://userspace.selinuxproject.org/

Package: libp11-kit0
Status: install ok installed
Priority: standard
Section: libs
Installed-Size: 275
Maintainer: Debian GnuTLS Maintainers <pkg-gnutls-maint@lists.alioth.debian.org>
Architecture: armhf
Multi-Arch: same
Source: p11-kit
Version: 0.23.3-2
Depends: libc6 (>= 2.16), libffi6 (>= 3.0.4)
Description: library for loading and coordinating access to PKCS#11 modules - runtime
 The p11-kit library provides a way to load and enumerate Public-Key
 Cryptography Standard #11 modules, along with a standard configuration
 setup for installing PKCS#11 modules so that they're discoverable. It
 also solves problems with coordinating the use of PKCS#11 by different
 components or libraries living in the same process.
 .
 This package contains the shared library required for applications loading
 and accessing PKCS#11 modules.
Homepage: http://p11-glue.freedesktop.org/p11-kit.html

Package: libdebconfclient0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 62
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Architecture: armhf
Multi-Arch: same
Source: cdebconf
Version: 0.227
Depends: libc6 (>= 2.4)
Description: Debian Configuration Management System (C-implementation library)
 Debconf is a configuration management system for Debian packages. It is
 used by some packages to prompt you for information before they are
 installed. cdebconf is a reimplementation of the original debconf in C.
 .
 This library allows C programs to interface with cdebconf.

Package: libselinux1
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 156
Maintainer: Debian SELinux maintainers <selinux-devel@lists.alioth.debian.org>
Architecture: armhf
Multi-Arch: same
Source: libselinux (2.6-3)
Version: 2.6-3+b3
Depends: libc6 (>= 2.8), libpcre3
Description: SELinux runtime shared libraries
 This package provides the shared libraries for Security-enhanced
 Linux that provides interfaces (e.g. library functions for the
 SELinux kernel APIs like getcon(), other support functions like
 getseuserbyname()) to SELinux-aware applications. Security-enhanced
 Linux is a patch of the Linux kernel and a number of utilities with
 enhanced security functionality designed to add mandatory access
 controls to Linux.  The Security-enhanced Linux kernel contains new
 architectural components originally developed to improve the security
 of the Flask operating system. These architectural components provide
 general support for the enforcement of many kinds of mandatory access
 control policies, including those based on the concepts of Type
 Enforcement, Role-based Access Control, and Multi-level Security.
 .
 libselinux1 provides an API for SELinux applications to get and set
 process and file security contexts and to obtain security policy
 decisions.  Required for any applications that use the SELinux
 API. libselinux may use the shared libsepol to manipulate the binary
 policy if necessary (e.g. to downgrade the policy format to an older
 version supported by the kernel) when loading policy.
Homepage: http://userspace.selinuxproject.org/

Package: systemd
Status: install ok installed
Priority: important
Section: admin
Installed-Size: 6802
Maintainer: Debian systemd Maintainers <pkg-systemd-maintainers@lists.alioth.debian.org>
Architecture: armhf
Multi-Arch: foreign
Version: 232-25+deb9u6
Replaces: udev (<< 228-5)
Depends: libacl1 (>= 2.2.51-8), libapparmor1 (>= 2.9.0-3+exp2), libaudit1 (>= 1:2.2.1), libblkid1 (>= 2.19.1), libc6 (>= 2.17), libcap2 (>= 1:2.10), libcryptsetup4 (>= 2:1.4.3), libgcrypt20 (>= 1.7.0), libgpg-error0 (>= 1.14), libidn11 (>= 1.13), libip4tc0 (>= 1.6.0+snapshot20161117), libkmod2 (>= 5~), liblz4-1 (>= 0.0~r127), liblzma5 (>= 5.1.1alpha+20120614), libmount1 (>= 2.26.2), libpam0g (>= 0.99.7.1), libseccomp2 (>= 2.3.1), libselinux1 (>= 2.1.9), libsystemd0 (= 232-25+deb9u6), util-linux (>= 2.27.1), mount (>= 2.26), adduser, procps
Pre-Depends: libc6 (>= 2.8), libgcc1 (>= 1:3.5)
Recommends: libpam-systemd, dbus
Suggests: systemd-ui, systemd-container, policykit-1
Breaks: adjtimex (<< 1.29-6), aoetools (<< 36-1.1), apparmor (<< 2.10.95-1), arno-iptables-firewall (<< 2.0.1.f-1), atm-tools (<< 1:2.5.1-1.6), clvm (<< 2.02.156-1), cman (<< 3.1.8-1.3+rm), console-common (<< 0.7.89), ebtables (<< 2.0.10.4-3.5), eeepc-acpi-scripts (<< 1.1.12+nmu1), espeakup (<< 1:0.71-27.1), ferm (<< 2.2-3.1), fiaif (<< 1.23.1-4+rm), gfs2-cluster (<< 3.1.8-1), gfs2-utils (<< 3.1.8-1), gom (<< 0.30.2-7), hdparm (<< 9.48+ds-1), ifrename (<< 30~pre9-9), ifscheme (<< 1.7-4), ifupdown (<< 0.8.5~), ifupdown-extra (<< 0.27), ipsec-tools (<< 1:0.8.2+20140711-6), kbd (<< 2.0.3-2), keyboard-configuration (<< 1.141), laptop-mode-tools (<< 1.68~), live-tools (<< 1:20151214+nmu1), lvm2 (<< 2.02.104-1), mdadm (<< 3.4-2), mt-st (<< 1.3-1), multipath-tools (<< 0.5.0+git1.656f8865-3), natlog (<< 1.02.00-4), nbd-client (<< 1:3.14-1), netenv (<< 0.94.3-30+rm), nfs-common (<< 1:1.2.8-9.1), ocfs2-tools (<< 1.8.4-2), pidentd (<< 3.0.19.ds1-7.1), rdnssd (<< 1.0.1-5), rgmanager (<< 3.1.8-1.3+rm), rpcbind (<< 0.2.3-0.1), screen (<< 4.3.1-2), scsitools (<< 0.12-2.3), selinux-basics (<< 0.5.3), setserial (<< 2.17-49), shorewall (<< 5.0.3.1-1), shorewall-init (<< 5.0.3.1-1), shorewall-lite (<< 5.0.3.1-1), shorewall6 (<< 5.0.3.1-1), shorewall6-lite (<< 5.0.3.1-1), srptools (<< 1.0.3-1), switchconf (<< 0.0.15-1), systemd-shim (<< 10-3~), udev (<< 228-5), ufw (<< 0.34-1), virtualbox-guest-x11 (<< 5.0.12-dfsg-2), zfs-fuse (<< 0.7.0-13.1), zvbi (<< 0.2.35-10)
Conffiles:
 /etc/dbus-1/system.d/org.freedesktop.hostname1.conf f55c94d000b5d62b5f06d38852977dd1
 /etc/dbus-1/system.d/org.freedesktop.locale1.conf 5893ab03e7e96aa3759baceb4dd04190
 /etc/dbus-1/system.d/org.freedesktop.login1.conf e2c3673cc09b6340fab20b1e21e80de4
 /etc/dbus-1/system.d/org.freedesktop.network1.conf 162e9a90d8f824f79ef2c6390827ec7b
 /etc/dbus-1/system.d/org.freedesktop.resolve1.conf 6969148b4616c56a5c9065cec5ab0775
 /etc/dbus-1/system.d/org.freedesktop.systemd1.conf c93c16e793f7254a38ce54df08807954
 /etc/dbus-1/system.d/org.freedesktop.timedate1.conf 682369fbf3de26b21e775732c89a2bbe
 /etc/dhcp/dhclient-exit-hooks.d/timesyncd a891f21f45b0648b7082d999bf424591
 /etc/pam.d/systemd-user 3d97692a0125712fcfbd7ddf756f7696
 /etc/systemd/journald.conf b89a22c219efce8b3700feafc61e0c18
 /etc/systemd/logind.conf aeeac805b4bfb7450183ce346999dd38
 /etc/systemd/resolved.conf 6fcc0661ab26fdea8fc71c7af82e5fa9
 /etc/systemd/system.conf adc308320471c75a60e07184cf2ebb05
 /etc/systemd/timesyncd.conf 54914cf38ff3b8f7dc81b87bb3849520
 /etc/systemd/user.conf 675370e2d80a4ad957202e68c1b4aaee
Description: system and service manager
 systemd is a system and service manager for Linux. It provides aggressive
 parallelization capabilities, uses socket and D-Bus activation for starting
 services, offers on-demand starting of daemons, keeps track of processes using
 Linux control groups, maintains mount and automount points and implements an
 elaborate transactional dependency-based service control logic.
 .
 systemd is compatible with SysV and LSB init scripts and can work as a
 drop-in replacement for sysvinit.
 .
 Installing the systemd package will not switch your init system unless you
 boot with init=/bin/systemd or install systemd-sysv in addition.
Homepage: https://www.freedesktop.org/wiki/Software/systemd

Package: dpkg
Essential: yes
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 6397
Origin: debian
Maintainer: Dpkg Developers <debian-dpkg@lists.debian.org>
Bugs: debbugs://bugs.debian.org
Architecture: armhf
Multi-Arch: foreign
Version: 1.18.25
Replaces: manpages-it (<< 2.80-4)
Depends: tar (>= 1.28-1)
Pre-Depends: libbz2-1.0, libc6 (>= 2.11), liblzma5 (>= 5.2.2), libselinux1 (>= 2.3), zlib1g (>= 1:1.1.4)
Suggests: apt, debsig-verify
Breaks: acidbase (<= 1.4.5-4), amule (<< 2.3.1+git1a369e47-3), beep (<< 1.3-4), im (<< 1:151-4), libdpkg-perl (<< 1.18.11), netselect (<< 0.3.ds1-27), pconsole (<< 1.0-12), phpgacl (<< 3.3.7-7.3), pure-ftpd (<< 1.0.43-1), systemtap (<< 2.8-1), terminatorx (<< 4.0.1-1), xvt (<= 2.1-20.1)
Conffiles:
 /etc/alternatives/README 69c4ba7f08363e998e0f2e244a04f881
 /etc/cron.daily/dpkg b8065b6bfc248caba501c3f5bb508e66
 /etc/dpkg/dpkg.cfg f4413ffb515f8f753624ae3bb365b81b
 /etc/logrotate.d/dpkg 782ea5ae536f67ff51dc8c3e2eeb4cf9
Description: Debian package management system
 This package provides the low-level infrastructure for handling the
 installation and removal of Debian software packages.
 .
 For Debian package development tools, install dpkg-dev.
Homepage: https://wiki.debian.org/Teams/Dpkg

Package: cryptsetup-bin
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 994
Maintainer: Debian Cryptsetup Team <pkg-cryptsetup-devel@lists.alioth.debian.org>
Architecture: armhf
Source: cryptsetup
Version: 2:1.7.3-4
Replaces: cryptsetup (<< 2:1.4.3-1~)
Depends: libc6 (>= 2.15), libcryptsetup4 (>= 2:1.6), libpopt0 (>= 1.14), libuuid1 (>= 2.16)
Breaks: cryptsetup (<< 2:1.4.3-1~)
Description: disk encryption support - command line tools
 Cryptsetup provides an interface for configuring encryption on block
 devices (such as /home or swap partitions), using the Linux kernel
 device mapper target dm-crypt. It features integrated Linux Unified Key
 Setup (LUKS) support.
 .
 This package provides cryptsetup, cryptsetup-reencrypt and luksformat.
Homepage: https://gitlab.com/cryptsetup/cryptsetup

Package: openssl
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 1028
Maintainer: Debian OpenSSL Team <pkg-openssl-devel@lists.alioth.debian.org>
Architecture: armhf
Multi-Arch: foreign
Version: 1.1.0f-3+deb9u2
Depends: libc6 (>= 2.15), libssl1.1 (>= 1.1.0)
Suggests: ca-certificates
Conffiles:
 /etc/ssl/openssl.cnf f697ef5df0d006882e6326606e8dbf4a
Description: Secure Sockets Layer toolkit - cryptographic utility
 This package is part of the OpenSSL project's implementation of the SSL
 and TLS cryptographic protocols for secure communication over the
 Internet.
 .
 It contains the general-purpose command line binary /usr/bin/openssl,
 useful for cryptographic operations such as:
  * creating RSA, DH, and DSA key parameters;
  * creating X.509 certificates, CSRs, and CRLs;
  * calculating message digests;
  * encrypting and decrypting with ciphers;
  * testing SSL/TLS clients and servers;
  * handling S/MIME signed or encrypted mail.
Homepage: https://www.openssl.org/

Package: libsqlite3-0
Status: install ok installed
Priority: standard
Section: libs
Installed-Size: 734
Maintainer: Laszlo Boszormenyi (GCS) <gcs@debian.org>
Architecture: armhf
Multi-Arch: same
Source: sqlite3
Version: 3.16.2-5+deb9u1
Depends: libc6 (>= 2.4)
Description: SQLite 3 shared library
 SQLite is a C library that implements an SQL database engine.
 Programs that link with the SQLite library can have SQL database
 access without running a separate RDBMS process.
Homepage: http://www.sqlite.org/

Package: apt
Status: install ok installed
Priority: important
Section: admin
Installed-Size: 3148
Maintainer: APT Development Team <deity@lists.debian.org>
Architecture: armhf
Version: 1.4.8
Replaces: apt-utils (<< 1.3~exp2~)
Depends: adduser, gpgv | gpgv2 | gpgv1, debian-archive-keyring, init-system-helpers (>= 1.18~), libapt-pkg5.0 (>= 1.3~rc2), libc6 (>= 2.15), libgcc1 (>= 1:3.5), libstdc++6 (>= 5.2)
Recommends: gnupg | gnupg2 | gnupg1
Suggests: apt-doc, aptitude | synaptic | wajig, dpkg-dev (>= 1.17.2), powermgmt-base, python-apt
Breaks: apt-utils (<< 1.3~exp2~)
Conffiles:
 /etc/apt/apt.conf.d/01autoremove 0b1391c01d75f95fa4ea5ac01219b515
 /etc/cron.daily/apt-compat bc4a71cbcaeed4179f25d798257fa980
 /etc/kernel/postinst.d/apt-auto-removal 4ad976a68f045517cf4696cec7b8aa3a
 /etc/logrotate.d/apt 179f2ed4f85cbaca12fa3d69c2a4a1c3
Description: commandline package manager
 This package provides commandline tools for searching and
 managing as well as querying information about packages
 as a low-level access to all features of the libapt-pkg library.
 .
 These include:
  * apt-get for retrieval of packages and information about them
    from authenticated sources and for installation, upgrade and
    removal of packages together with their dependencies
  * apt-cache for querying available information about installed
    as well as installable packages
  * apt-cdrom to use removable media as a source for packages
  * apt-config as an interface to the configuration settings
  * apt-key as an interface to manage authentication keys

Package: libmpfr4
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 674
Maintainer: Debian GCC Maintainers <debian-gcc@lists.debian.org>
Architecture: armhf
Multi-Arch: same
Source: mpfr4
Version: 3.1.5-1
Depends: libc6 (>= 2.4), libgmp10
Breaks: libgmp3 (<< 4.1.4-3)
Description: multiple precision floating-point computation
 MPFR provides a library for multiple-precision floating-point computation
 with correct rounding.  The computation is both efficient and has a
 well-defined semantics. It copies the good ideas from the
 ANSI/IEEE-754 standard for double-precision floating-point arithmetic
 (53-bit mantissa).
Homepage: http://www.mpfr.org/

Package: dmsetup
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 201
Maintainer: Debian LVM Team <pkg-lvm-maintainers@lists.alioth.debian.org>
Architecture: armhf
Multi-Arch: foreign
Source: lvm2 (2.02.168-2)
Version: 2:1.02.137-2
Depends: libc6 (>= 2.8), libdevmapper1.02.1 (>= 2:1.02.131)
Description: Linux Kernel Device Mapper userspace library
 The Linux Kernel Device Mapper is the LVM (Linux Logical Volume Management)
 Team's implementation of a minimalistic kernel-space driver that handles
 volume management, while keeping knowledge of the underlying device layout
 in user-space.  This makes it useful for not only LVM, but software raid,
 and other drivers that create "virtual" block devices.
 .
 This package contains a utility for modifying device mappings.
Homepage: http://sources.redhat.com/lvm2/

Package: pciutils
Status: install ok installed
Priority: standard
Section: admin
Installed-Size: 1189
Maintainer: Anibal Monsalve Salazar <anibal@debian.org>
Architecture: armhf
Multi-Arch: foreign
Version: 1:3.5.2-1
Depends: libc6 (>= 2.7), libkmod2 (>= 5~), libpci3 (= 1:3.5.2-1)
Suggests: bzip2, wget | curl | lynx-cur
Description: Linux PCI Utilities
 This package contains various utilities for inspecting and setting of
 devices connected to the PCI bus.
Homepage: http://atrey.karlin.mff.cuni.cz/~mj/pciutils.shtml

Package: diffutils
Essential: yes
Status: install ok installed
Priority: required
Section: utils
Installed-Size: 1223
Maintainer: Santiago Vila <sanvila@debian.org>
Architecture: armhf
Version: 1:3.5-3
Replaces: diff
Pre-Depends: libc6 (>= 2.17)
Suggests: diffutils-doc, wdiff
Description: File comparison utilities
 The diffutils package provides the diff, diff3, sdiff, and cmp programs.
 .
 `diff' shows differences between two files, or each corresponding file
 in two directories.  `cmp' shows the offsets and line numbers where
 two files differ.  `cmp' can also show all the characters that
 differ between the two files, side by side.  `diff3' shows differences
 among three files.  `sdiff' merges two files interactively.
 .
 The set of differences produced by `diff' can be used to distribute
 updates to text files (such as program source code) to other people.
 This method is especially useful when the differences are small compared
 to the complete files.  Given `diff' output, the `patch' program can
 update, or "patch", a copy of the file.
Homepage: http://www.gnu.org/software/diffutils/

Package: liblvm2app2.2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 989
Maintainer: Debian LVM Team <pkg-lvm-maintainers@lists.alioth.debian.org>
Architecture: armhf
Multi-Arch: same
Source: lvm2
Version: 2.02.168-2
Depends: libblkid1 (>= 2.24.2), libc6 (>= 2.15), libdevmapper-event1.02.1 (>= 2:1.02.74), libdevmapper1.02.1 (>= 2:1.02.135), libudev1 (>= 183)
Description: LVM2 application library
 This package contains the lvm2app shared library. It allows easier access
 to the basic LVM objects and provides functions to enumerate, create or
 modify them.
Homepage: http://sources.redhat.com/lvm2/

Package: libpam-modules
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 668
Maintainer: Steve Langasek <vorlon@debian.org>
Architecture: armhf
Multi-Arch: same
Source: pam
Version: 1.1.8-3.6
Replaces: libpam-umask, libpam0g-util
Provides: libpam-mkhomedir, libpam-motd, libpam-umask
Pre-Depends: libaudit1 (>= 1:2.2.1), libc6 (>= 2.15), libdb5.3, libpam0g (>= 1.1.3-2), libselinux1 (>= 2.1.9), debconf (>= 0.5) | debconf-2.0, libpam-modules-bin (= 1.1.8-3.6)
Conflicts: libpam-mkhomedir, libpam-motd, libpam-umask
Conffiles:
 /etc/security/access.conf 13ec4d189f0ed9acf3433977a53d446b
 /etc/security/group.conf f1e26e8db6f7abd2d697d7dad3422c36
 /etc/security/limits.conf 11c27ba00b7bd6a255f33126f75c5005
 /etc/security/namespace.conf 6424c99a62ddf4b7d3ca713bb06ded89
 /etc/security/namespace.init d9e6a7c85e966427ef23a04ec6c7000f
 /etc/security/pam_env.conf ddee4a931170dc21b4e0b9bb28e02a7b
 /etc/security/sepermit.conf d41c74654734a5c069a37bfc02f0a6d4
 /etc/security/time.conf 06e05c6079e839c8833ac7c3abfde192
Description: Pluggable Authentication Modules for PAM
 This package completes the set of modules for PAM. It includes the
  pam_unix.so module as well as some specialty modules.
Homepage: http://www.linux-pam.org/

Package: libstdc++6
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 1466
Maintainer: Debian GCC Maintainers <debian-gcc@lists.debian.org>
Architecture: armhf
Multi-Arch: same
Source: gcc-6
Version: 6.3.0-18+deb9u1
Replaces: libstdc++6-6-dbg (<< 4.9.0-3)
Provides: libstdc++6-armhf
Depends: gcc-6-base (= 6.3.0-18+deb9u1), libc6 (>= 2.18), libgcc1 (>= 1:3.5)
Breaks: blockattack (<= 1.4.1+ds1-2.1+b2), boo (<= 0.9.5~git20110729.r1.202a430-2), c++-annotations (<= 10.2.0-1), clustalx (<= 2.1+lgpl-3), dff (<= 1.3.0+dfsg.1-4.1+b3), digikam-private-libs (<= 4:4.4.0-1.1+b2), emscripten (<= 1.22.1-1), ergo (<= 3.4.0-1), fceux (<= 2.2.2+dfsg0-1), fiona (<= 1.5.1-2), flush (<= 0.9.12-3.1), freeorion (<= 0.4.4+git20150327-2), fslview (<= 4.0.1-4), fwbuilder (<= 5.1.0-4), gcc-4.3 (<< 4.3.6-1), gcc-4.4 (<< 4.4.6-4), gcc-4.5 (<< 4.5.3-2), gnote (<= 3.16.2-1), gnudatalanguage (<= 0.9.5-2+b2), innoextract (<= 1.4-1+b1), libantlr-dev (<= 2.7.7+dfsg-6), libapache2-mod-passenger (<= 5.0.7-1), libaqsis1 (<= 1.8.2-1), libassimp3 (<= 3.0~dfsg-4), libboost-date-time1.54.0, libboost-date-time1.55.0, libchemps2-1 (<= 1.5-1), libcpprest2.4 (<= 2.4.0-2), libdap17 (<= 3.14.0-2), libdapclient6 (<= 3.14.0-2), libdapserver7 (<= 3.14.0-2), libdavix0 (<= 0.4.0-1+b1), libdballe6 (<= 6.8-1), libdiet-admin2.8 (<= 2.8.0-1+b3), libdiet-client2.8 (<= 2.8.0-1+b3), libdiet-sed2.8 (<= 2.8.0-1+b3), libfreefem++ (<= 3.37.1-1), libgazebo5 (<= 5.0.1+dfsg-2.1), libgetfem4++ (<= 4.2.1~beta1~svn4635~dfsg-3+b1), libgmsh2 (<= 2.9.3+dfsg1-1), libinsighttoolkit4.7 (<= 4.7.2-2), libkolabxml1 (<= 1.1.0-3), libmarisa0 (<= 0.2.4-8), libogre-1.8.0 (<= 1.8.0+dfsg1-7+b1), libogre-1.9.0 (<= 1.9.0+dfsg1-4), libopencv-core2.4, libopenmpi1.6, libopenwalnut1 (<= 1.4.0~rc1+hg3a3147463ee2-1+b1), libpqxx-4.0 (<= 4.0.1+dfsg-3), libreoffice-core (<= 1:4.4.5-2), librime1 (<= 1.2+dfsg-2), libsigc++-2.0-0c2a (<= 2.4.1-1+b1), libwibble-dev (<= 1.1-1), libwreport2 (<= 2.14-1), libxmltooling6 (<= 1.5.3-2.1), lightspark (<= 0.7.2+git20150512-2+b1), mira-assembler (<= 4.9.5-1), mongodb (<= 1:2.4.14-2), mongodb-server (<= 1:2.4.14-2), ncbi-blast+ (<= 2.2.30-4), openscad (<= 2014.03+dfsg-1+b1), passepartout (<= 0.7.1-1.1), pdf2djvu (<= 0.7.21-2), photoprint (<= 0.4.2~pre2-2.3+b2), plastimatch (<= 1.6.2+dfsg-1), plee-the-bear (<= 0.6.0-3.1), povray (<= 1:3.7.0.0-8), powertop (<= 2.6.1-1), printer-driver-brlaser (<= 3-3), psi4 (<= 4.0~beta5+dfsg-2+b1), python-fiona (<= 1.5.1-2), python-guiqwt (<= 2.3.1-1), python-healpy (<= 1.8.1-1+b1), python-htseq (<= 0.5.4p3-2), python-imposm (<= 2.5.0-3+b2), python-pysph (<= 0~20150606.gitfa26de9-5), python-rasterio (<= 0.24.0-1), python-scipy (<= 0.14.1-1), python-sfml (<= 2.2~git20150611.196c88+dfsg-1+b1), python3-fiona (<= 1.5.1-2), python3-scipy (<= 0.14.1-1), python3-sfml (<= 2.2~git20150611.196c88+dfsg-1+b1), python3-taglib (<= 0.3.6+dfsg-2+b2), realtimebattle (<= 1.0.8-14), ruby-passenger (<= 5.0.7-1), schroot (<= 1.6.10-1+b1), sqlitebrowser (<= 3.5.1-3), tecnoballz (<= 0.93.1-6), wesnoth-1.12-core (<= 1:1.12.4-1), widelands (<= 1:18-3+b1), xflr5 (<= 6.09.06-2)
Conflicts: scim (<< 1.4.2-1)
Description: GNU Standard C++ Library v3
 This package contains an additional runtime library for C++ programs
 built with the GNU compiler.
 .
 libstdc++-v3 is a complete rewrite from the previous libstdc++-v2, which
 was included up to g++-2.95. The first version of libstdc++-v3 appeared
 in g++-3.0.
Homepage: http://gcc.gnu.org/

Package: libkrb5-3
Status: install ok installed
Priority: standard
Section: libs
Installed-Size: 697
Maintainer: Sam Hartman <hartmans@debian.org>
Architecture: armhf
Multi-Arch: same
Source: krb5
Version: 1.15-1+deb9u1
Depends: libc6 (>= 2.16), libcomerr2 (>= 1.34), libk5crypto3 (>= 1.15~beta1), libkeyutils1 (>= 1.5.9), libkrb5support0 (= 1.15-1+deb9u1)
Recommends: krb5-locales
Suggests: krb5-doc, krb5-user
Breaks: libsmbclient (<= 2:3.6.1-2), sssd (<= 1.2.1-4.3)
Description: MIT Kerberos runtime libraries
 Kerberos is a system for authenticating users and services on a network.
 Kerberos is a trusted third-party service.  That means that there is a
 third party (the Kerberos server) that is trusted by all the entities on
 the network (users and services, usually called "principals").
 .
 This is the MIT reference implementation of Kerberos V5.
 .
 This package contains the runtime library for the main Kerberos v5 API
 used by applications and Kerberos clients.
Homepage: http://web.mit.edu/kerberos/

Package: libffi6
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 43
Maintainer: Debian GCC Maintainers <debian-gcc@lists.debian.org>
Architecture: armhf
Multi-Arch: same
Source: libffi
Version: 3.2.1-6
Depends: libc6 (>= 2.7), libgcc1 (>= 1:3.5)
Description: Foreign Function Interface library runtime
 A foreign function interface is the popular name for the interface that
 allows code written in one language to call code written in another
 language.

Package: libaudit-common
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 30
Maintainer: Laurent Bigonville <bigon@debian.org>
Architecture: all
Multi-Arch: foreign
Source: audit
Version: 1:2.6.7-2
Replaces: libaudit0, libaudit1 (<< 1:2.2.1-2)
Breaks: libaudit0, libaudit1 (<< 1:2.2.1-2)
Conffiles:
 /etc/libaudit.conf cdc703f9d27f0d980271a9e95d0f18b2
Description: Dynamic library for security auditing - common files
 The audit-libs package contains the dynamic libraries needed for
 applications to use the audit framework. It is used to monitor systems for
 security related events.
 .
 This package contains the libaudit.conf configuration file and the associated
 manpage.
Homepage: https://people.redhat.com/sgrubb/audit/

Package: sg3-utils
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 1808
Maintainer: Ritesh Raj Sarraf <rrs@debian.org>
Architecture: armhf
Version: 1.42-2
Replaces: sg-utils
Depends: libc6 (>= 2.7), libsgutils2-2 (>= 1.42)
Conflicts: cdwrite, sg-utils
Description: utilities for devices using the SCSI command set
 Most OSes have SCSI pass-through interfaces that enable user space programs
 to send SCSI commands to a device and fetch the response. With SCSI to ATA
 Translation (SAT) many ATA disks now can process SCSI commands. Typically
 each utility in this package implements one SCSI command. See the draft
 standards at www.t10.org for SCSI command definitions plus SAT. ATA
 commands are defined in the draft standards at www.t13.org . For a mapping
 between supported SCSI and ATA commands and utility names in this package
 see the COVERAGE file.
Homepage: http://sg.danny.cz/sg/

Package: libcomerr2
Status: install ok installed
Priority: optional
Section: oldlibs
Installed-Size: 70
Maintainer: Theodore Y. Ts'o <tytso@mit.edu>
Architecture: armhf
Multi-Arch: same
Source: e2fsprogs
Version: 1.44.5-1~bpo9+1
Depends: libcom-err2
Description: transitional package
 This is a transitional package. It can safely be removed.
Homepage: http://e2fsprogs.sourceforge.net

Package: nbd-client
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 117
Maintainer: Wouter Verhelst <wouter@debian.org>
Architecture: armhf
Source: nbd
Version: 1:3.15.2-3
Depends: libc6 (>= 2.15), libgnutls30 (>= 3.5.6), debconf (>= 0.5) | debconf-2.0
Conffiles:
 /etc/init.d/nbd-client 43243c96295432ac2d344edc0e586537
 /etc/modprobe.d/nbd-client.conf 8028d680ef3ac9f3c6cfe661c295b4dd
 /etc/nbdtab c4370a4ca18d14dd74dedb0ea823f23d
Description: Network Block Device protocol - client
 Network Block Device (NBD) is a client/server protocol that
 emulates a block device (such as a hard disk, a floppy, or a CD-ROM)
 over the network, thus giving the system the ability to swap over the
 network, or to use raw network disk space for other purposes.
 .
 However, writing to one Network Block Device from different clients
 simultaneously is not recommended, and would probably result in data
 loss. If you want multiple clients to share a remote resource, use a
 network file system such as NFS or Coda.
 .
 This package provides the client binary for NBD.
Homepage: http://nbd.sourceforge.net/

Package: findutils
Essential: yes
Status: install ok installed
Priority: required
Section: utils
Installed-Size: 1751
Maintainer: Andreas Metzler <ametzler@debian.org>
Architecture: armhf
Multi-Arch: foreign
Version: 4.6.0+git+20161106-2
Pre-Depends: libc6 (>= 2.17), libselinux1 (>= 1.32)
Suggests: mlocate | locate
Breaks: binstats (<< 1.08-8.1), debhelper (<< 9.20130504), guilt (<< 0.36-0.2), kernel-package (<< 13.000), libpython3.4-minimal (<< 3.4.4-2), libpython3.5-minimal (<< 3.5.1-3), lsat (<< 0.9.7.1-2.1), mc (<< 3:4.8.11-1), sendmail (<< 8.14.4-5), switchconf (<< 0.0.9-2.1)
Conflicts: debconf (<< 1.5.50)
Description: utilities for finding files--find, xargs
 GNU findutils provides utilities to find files meeting specified
 criteria and perform various actions on the files which are found.
 This package contains 'find' and 'xargs'; however, 'locate' has
 been split off into a separate package.
Homepage: http://savannah.gnu.org/projects/findutils/

Package: libpam0g
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 202
Maintainer: Steve Langasek <vorlon@debian.org>
Architecture: armhf
Multi-Arch: same
Source: pam
Version: 1.1.8-3.6
Replaces: libpam0g-util
Depends: libaudit1 (>= 1:2.2.1), libc6 (>= 2.8), debconf (>= 0.5) | debconf-2.0
Suggests: libpam-doc
Description: Pluggable Authentication Modules library
 Contains the shared library for Linux-PAM, a library that enables the
 local system administrator to choose how applications authenticate users.
 In other words, without rewriting or recompiling a PAM-aware application,
 it is possible to switch between the authentication mechanism(s) it uses.
 One may entirely upgrade the local authentication system without touching
 the applications themselves.
Homepage: http://www.linux-pam.org/

Package: libcap-ng0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 34
Maintainer: Pierre Chifflier <pollux@debian.org>
Architecture: armhf
Multi-Arch: same
Source: libcap-ng (0.7.7-3)
Version: 0.7.7-3+b1
Depends: libc6 (>= 2.8)
Description: An alternate POSIX capabilities library
 This library implements the user-space interfaces to the POSIX
 1003.1e capabilities available in Linux kernels.  These capabilities are
 a partitioning of the all powerful root privilege into a set of distinct
 privileges.
 .
 The libcap-ng library is intended to make programming with POSIX
 capabilities much easier than the traditional libcap library.
 .
 This package contains header files and libraries for libcap-ng.
Homepage: http://people.redhat.com/sgrubb/libcap-ng

Package: dbus
Status: install ok installed
Priority: standard
Section: admin
Installed-Size: 415
Maintainer: Utopia Maintenance Team <pkg-utopia-maintainers@lists.alioth.debian.org>
Architecture: armhf
Multi-Arch: foreign
Version: 1.10.26-0+deb9u1
Depends: adduser, init-system-helpers (>= 1.3~), lsb-base (>= 3.2-14), libapparmor1 (>= 2.8.95), libaudit1 (>= 1:2.2.1), libc6 (>= 2.9), libcap-ng0, libdbus-1-3 (= 1.10.26-0+deb9u1), libexpat1 (>= 2.1~beta3), libselinux1 (>= 2.0.65), libsystemd0 (>= 209)
Suggests: default-dbus-session-bus | dbus-session-bus
Conffiles:
 /etc/default/dbus 0d0f25a2f993509c857eb262f6e22015
 /etc/init.d/dbus ec9a7d183ec50837a12aca3f9c95cc27
Description: simple interprocess messaging system (daemon and utilities)
 D-Bus is a message bus, used for sending messages between applications.
 Conceptually, it fits somewhere in between raw sockets and CORBA in
 terms of complexity.
 .
 D-Bus supports broadcast messages, asynchronous messages (thus
 decreasing latency), authentication, and more. It is designed to be
 low-overhead; messages are sent using a binary protocol, not using
 XML. D-Bus also supports a method call mapping for its messages, but
 it is not required; this makes using the system quite simple.
 .
 It comes with several bindings, including GLib, Python, Qt and Java.
 .
 This package contains the D-Bus daemon and related utilities.
 .
 The client-side library can be found in the libdbus-1-3 package, as it is no
 longer contained in this package.
Homepage: http://dbus.freedesktop.org/

Package: libmount1
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 293
Maintainer: Debian util-linux Maintainers <ah-util-linux@debian.org>
Architecture: armhf
Multi-Arch: same
Source: util-linux
Version: 2.29.2-1+deb9u1
Depends: libblkid1 (>= 2.17.2), libc6 (>= 2.17), libselinux1 (>= 2.6-3~)
Description: device mounting library
 This device mounting library is used by mount and umount helpers.

Package: libkeyutils1
Status: install ok installed
Priority: standard
Section: libs
Installed-Size: 32
Maintainer: Christian Kastner <ckk@debian.org>
Architecture: armhf
Multi-Arch: same
Source: keyutils
Version: 1.5.9-9
Depends: libc6 (>= 2.7)
Description: Linux Key Management Utilities (library)
 Keyutils is a set of utilities for managing the key retention facility in the
 kernel, which can be used by filesystems, block devices and more to gain and
 retain the authorization and encryption keys required to perform secure
 operations.
 .
 This package provides a wrapper library for the key management facility system
 calls.
Homepage: http://people.redhat.com/~dhowells/keyutils/

Package: libreadline5
Status: install ok installed
Priority: extra
Section: libs
Installed-Size: 218
Maintainer: Debian QA Group <packages@qa.debian.org>
Architecture: armhf
Multi-Arch: same
Source: readline5 (5.2+dfsg-3)
Version: 5.2+dfsg-3+b1
Depends: readline-common, libc6 (>= 2.15), libtinfo5 (>= 6)
Description: GNU readline and history libraries, run-time libraries
 The GNU readline library aids in the consistency of user interface
 across discrete programs that need to provide a command line
 interface.
 .
 The GNU history library provides a consistent user interface for
 recalling lines of previously typed input.

Package: bsdmainutils
Status: install ok installed
Priority: important
Section: utils
Installed-Size: 517
Maintainer: Debian Bsdmainutils Team <pkg-bsdmainutils@teams.debian.net>
Architecture: armhf
Multi-Arch: foreign
Version: 9.0.12+nmu1
Depends: libbsd0 (>= 0.2.0), libc6 (>= 2.4), libncurses5 (>= 6), libtinfo5 (>= 6), bsdutils (>= 3.0-0), debianutils (>= 1.8)
Suggests: cpp, wamerican | wordlist, whois, vacation
Breaks: bsdutils (<< 1:2.13-11)
Conffiles:
 /etc/calendar/default f499e79b0d2d685aa5ae7e1013940b96
 /etc/cron.daily/bsdmainutils 559387f792462a62e3efb1d573e38d11
 /etc/default/bsdmainutils bded239f4fea461cc5c92c3bd5a28cc9
Description: collection of more utilities from FreeBSD
 This package contains lots of small programs many people expect to find when
 they use a BSD-style Unix system.
 .
 It provides banner (as printerbanner), calendar, col, colcrt, colrm, column,
 from (as bsd-from), hexdump (or hd), look, lorder, ncal (or cal), ul, and
 write (as bsd-write).
 .
 This package used to contain whois and vacation, which are now distributed in
 their own packages. Also here was tsort, which is now in the "coreutils"
 package.

Package: login
Essential: yes
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 2698
Maintainer: Shadow package maintainers <pkg-shadow-devel@lists.alioth.debian.org>
Architecture: armhf
Source: shadow
Version: 1:4.4-4.1
Replaces: manpages-de (<< 0.5-3), manpages-tr (<< 1.0.5), manpages-zh (<< 1.5.1-1)
Pre-Depends: libaudit1 (>= 1:2.2.1), libc6 (>= 2.7), libpam0g (>= 0.99.7.1), libpam-runtime, libpam-modules (>= 1.1.8-1)
Conflicts: amavisd-new (<< 2.3.3-8), backupninja (<< 0.9.3-5), echolot (<< 2.1.8-4), gnunet (<< 0.7.0c-2), python-4suite (<< 0.99cvs20060405-1)
Conffiles:
 /etc/login.defs c92ea31d5ac50ae3e5d33d24f1e70983
 /etc/pam.d/login 1fd6cb4d4267a68148ee9973510a9d3e
 /etc/pam.d/su ce6dcfda3b190a27a455bb38a45ff34a
 /etc/securetty a7fc5292d9ae16f24d45f94fe88e001b
Description: system login tools
 These tools are required to be able to login and use your system. The
 login program invokes your user shell and enables command execution. The
 newgrp program is used to change your effective group ID (useful for
 workgroup type situations). The su program allows changing your effective
 user ID (useful being able to execute commands as another user).
Homepage: https://github.com/shadow-maint/shadow

Package: bc
Status: install ok installed
Priority: standard
Section: math
Installed-Size: 207
Maintainer: Ryan Kavanagh <rak@debian.org>
Architecture: armhf
Multi-Arch: foreign
Source: bc (1.06.95-9)
Version: 1.06.95-9+b3
Depends: libc6 (>= 2.4), libreadline7 (>= 6.0), libtinfo5 (>= 6)
Description: GNU bc arbitrary precision calculator language
 GNU bc is an interactive algebraic language with arbitrary precision which
 follows the POSIX 1003.2 draft standard, with several extensions including
 multi-character variable names, an `else' statement and full Boolean
 expressions.  GNU bc does not require the separate GNU dc program.
Homepage: http://ftp.gnu.org/gnu/bc/

Package: jupp
Status: install ok installed
Priority: optional
Section: editors
Installed-Size: 487
Maintainer: Thorsten Glaser <tg@mirbsd.de>
Architecture: armhf
Multi-Arch: foreign
Version: 3.1.30-1
Provides: editor
Depends: libc6 (>= 2.4), libselinux1 (>= 1.32), libtinfo5 (>= 6)
Breaks: joe (<< 3.7-2.3~)
Enhances: nbc
Conffiles:
 /etc/jupp/charmaps/klingon e760f34e0bd3ceeb2221a7665c7eb7e8
 /etc/jupp/jupprc c1f4d7128e2771c6ffae4eec03af5e41
 /etc/jupp/syntax/asm.jsf f92a20999ed748642c8c7345a9319a48
 /etc/jupp/syntax/c.jsf e7f76663692a8e760b6c2fd8edb4b253
 /etc/jupp/syntax/conf.jsf 70b0f5a48cdbafa85d965d8cad293ab7
 /etc/jupp/syntax/csh.jsf bdfdf136a6e521bf3df331cf1070b0f8
 /etc/jupp/syntax/diff.jsf 97578a159e8fa08375dcd99f985b1856
 /etc/jupp/syntax/fortran.jsf 78be9a224a971c05dce5c95749e4134c
 /etc/jupp/syntax/html.jsf 952c619d9db3307562310656a6f32b68
 /etc/jupp/syntax/java.jsf 6f332f26a3ab8cc3f73ba32826673e06
 /etc/jupp/syntax/lisp.jsf ff20d0307931ca775d444016da0c5161
 /etc/jupp/syntax/mail.jsf e162257089971e742157b02996a7cddc
 /etc/jupp/syntax/mason.jsf 710f29f96efcb1d3caf7c547e9048336
 /etc/jupp/syntax/pascal.jsf 4f3bb03277c67b8a68165a438c15f2a2
 /etc/jupp/syntax/perl.jsf d5d4aac001eec7c59b052197eeace970
 /etc/jupp/syntax/php.jsf c73529faa2d9a84d2136f5849da33ed6
 /etc/jupp/syntax/python.jsf af31e4fa508f57ce94d24bd7030c0482
 /etc/jupp/syntax/sh.jsf 4a2c2784f8cde3c28f266c791885dadc
 /etc/jupp/syntax/tcl.jsf 55bbc12c794f06f5ace96d87bada7187
 /etc/jupp/syntax/tex.jsf 2e5aa28cf0f7222c782a022d464afa0d
 /etc/jupp/syntax/verilog.jsf 85f8f519aa3bbb1964a015f98ed15977
 /etc/jupp/syntax/vhdl.jsf 0e3a676eca535a1d8cd3fa79c8291bad
 /etc/jupp/syntax/xml.jsf 738b7cd82f300cefa8e03ed3fd264aa2
Description: user friendly full screen text editor
 Joe, the Joe's Own Editor, has the feel of most PC text editors: the key
 sequences are reminiscent of WordStar and Turbo C editors, but the feature
 set is much larger than of those.  Joe has all of the features a Unix
 user should expect: full use of termcap/terminfo, complete VI-style Unix
 integration, a powerful configuration file, and regular expression search
 system.  It also has eight help reference cards which are always available,
 and an intuitive, simple, and well thought-out user interface.
 .
 Joe has a great screen update optimisation algorithm, multiple windows
 (through/between which you can scroll) and lacks the confusing notion of
 named buffers.  It has command history, TAB expansion in file selection
 menus, undo and redo functions, (un)indenting and paragraph formatting,
 filtering highlighted blocks through any external Unix command, editing
 a pipe into or out of a command, block move, copy, delete or filter, a
 bracketed paste mode automatically enabled on xterm-xfree86 and decimal
 and hexadecimal gotos for lines, columns, and file offsets.
 .
 Through simple QEdit-style configuration files, Joe can be set up to
 emulate editors such as Pico and Emacs, along with a complete imitation
 of WordStar, and a restricted mode version (lets you edit only the files
 specified on the command line).  Joe also has a deferred screen update to
 handle typeahead, and it ensures that deferral is not bypassed by tty
 buffering.  It's usable even at 2400 baud, and it will work on any
 kind of sane terminal.  Furthermore, it supports SELinux context copying
 on Debian systems with the Linux kernel.
 .
 This version of JOE only comes with the Jupp flavour, to not conflict
 with the Debian joe package, activated. The resource files and executable
 links and menu entries for the other flavours are still available, though,
 in the joe-jupp package.
Homepage: https://www.mirbsd.org/jupp.htm

Package: libevent-2.0-5
Status: install ok installed
Priority: standard
Section: libs
Installed-Size: 236
Maintainer: Anibal Monsalve Salazar <anibal@debian.org>
Architecture: armhf
Multi-Arch: same
Source: libevent
Version: 2.0.21-stable-3
Depends: libc6 (>= 2.17)
Description: Asynchronous event notification library
 Libevent is an asynchronous event notification library that provides a
 mechanism to execute a callback function when a specific event occurs
 on a file descriptor or after a timeout has been reached.
 .
 It is meant to replace the asynchronous event loop found in
 event driven network servers. Currently, libevent supports /dev/poll,
 kqueue(2), event ports, select(2), poll(2) and epoll(4).
 .
 For backward compatibility and to transition to "libevent_core only"
 or "libevent_core + libevent_extra", the libevent source package builds
 the libevent library that includes everything in libevent_core and
 libevent_extra.
Homepage: http://libevent.org/

Package: libpython2.7-minimal
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 2767
Maintainer: Matthias Klose <doko@debian.org>
Architecture: armhf
Multi-Arch: same
Source: python2.7
Version: 2.7.13-2+deb9u3
Replaces: libpython2.7-stdlib (<< 2.7.8-7), python2.7 (<< 2.7.4-2), python2.7-minimal (<< 2.7.3-10)
Recommends: libpython2.7-stdlib
Breaks: python2.7-minimal (<< 2.7.4~rc1-1~)
Conflicts: binfmt-support (<< 1.1.2)
Conffiles:
 /etc/python2.7/sitecustomize.py d6b276695157bde06a56ba1b2bc53670
Description: Minimal subset of the Python language (version 2.7)
 This package contains some essential modules. It is normally not
 used on it's own, but as a dependency of python2.7-minimal.

Package: libpci3
Status: install ok installed
Priority: standard
Section: libs
Installed-Size: 76
Maintainer: Anibal Monsalve Salazar <anibal@debian.org>
Architecture: armhf
Multi-Arch: same
Source: pciutils
Version: 1:3.5.2-1
Replaces: libpci2
Provides: libpci2
Depends: libc6 (>= 2.7), libudev1 (>= 196), zlib1g (>= 1:1.1.4)
Conflicts: libpci2
Description: Linux PCI Utilities (shared library)
 This package contains the libpci shared library files.
 .
 The libpci library provides portable access to configuration
 registers of devices connected to the PCI bus.
Homepage: http://atrey.karlin.mff.cuni.cz/~mj/pciutils.shtml

Package: net-tools
Status: install ok installed
Priority: important
Section: net
Installed-Size: 778
Maintainer: net-tools Team <pkg-net-tools-maintainers@lists.alioth.debian.org>
Architecture: armhf
Multi-Arch: foreign
Version: 1.60+git20161116.90da8a0-1
Replaces: ja-trans (<= 0.8-2), netbase (<< 4.00)
Depends: libc6 (>= 2.4), libselinux1 (>= 1.32)
Conflicts: ja-trans (<= 0.8-2)
Description: NET-3 networking toolkit
 This package includes the important tools for controlling the network
 subsystem of the Linux kernel.  This includes arp, ifconfig, netstat,
 rarp, nameif and route.  Additionally, this package contains utilities
 relating to particular network hardware types (plipconfig, slattach,
 mii-tool) and advanced aspects of IP configuration (iptunnel, ipmaddr).
 .
 In the upstream package 'hostname' and friends are included. Those are
 not installed by this package, since there is a special "hostname*.deb".
Homepage: http://sourceforge.net/projects/net-tools/

Package: adduser
Status: install ok installed
Priority: important
Section: admin
Installed-Size: 849
Maintainer: Debian Adduser Developers <adduser-devel@lists.alioth.debian.org>
Architecture: all
Multi-Arch: foreign
Version: 3.115
Depends: passwd, debconf (>= 0.5) | debconf-2.0
Suggests: liblocale-gettext-perl, perl
Conffiles:
 /etc/deluser.conf 773fb95e98a27947de4a95abb3d3f2a2
Description: add and remove users and groups
 This package includes the 'adduser' and 'deluser' commands for creating
 and removing users.
 .
  - 'adduser' creates new users and groups and adds existing users to
    existing groups;
  - 'deluser' removes users and groups and removes users from a given
    group.
 .
 Adding users with 'adduser' is much easier than adding them manually.
 Adduser will choose appropriate UID and GID values, create a home
 directory, copy skeletal user configuration, and automate setting
 initial values for the user's password, real name and so on.
 .
 Deluser can back up and remove users' home directories
 and mail spool or all the files they own on the system.
 .
 A custom script can be executed after each of the commands.
 .
  Development mailing list:
    http://lists.alioth.debian.org/mailman/listinfo/adduser-devel/
Homepage: http://alioth.debian.org/projects/adduser/

Package: multipath-tools
Status: install ok installed
Priority: extra
Section: admin
Installed-Size: 557
Maintainer: Debian DM Multipath Team <team+linux-blocks@tracker.debian.org>
Architecture: armhf
Version: 0.6.4-5+deb9u1
Depends: libaio1 (>= 0.3.106-8), libc6 (>= 2.17), libdevmapper1.02.1 (>= 2:1.02.97), librados2 (>= 0.72.2), libreadline7 (>= 6.0), libsystemd0, libudev1 (>= 183), liburcu4 (>= 0.8.4), init-system-helpers (>= 1.18~), udev (>> 136-1), kpartx (>= 0.6.4-5+deb9u1), lsb-base (>= 3.0-6), sg3-utils-udev
Suggests: multipath-tools-boot
Breaks: multipath-tools-boot (<= 0.4.8+git0.761c66f-2~), multipath-tools-initramfs (<= 1.0.1)
Conffiles:
 /etc/init.d/multipath-tools bef1d61a515fcdb6aa1bb72618e10f87
Description: maintain multipath block device access
 These tools are in charge of maintaining the disk multipath device maps and
 react to path and map events.
 .
 If you install this package you may have to change the way you address block
 devices. See README.Debian for details.
Homepage: http://christophe.varoqui.free.fr/

Package: stress
Status: install ok installed
Priority: optional
Section: devel
Installed-Size: 48
Maintainer: Joao Eriberto Mota Filho <eriberto@debian.org>
Architecture: armhf
Version: 1.0.4-2
Depends: libc6 (>= 2.7)
Description: tool to impose load on and stress test a computer system
 'stress' is a tool that imposes a configurable amount of CPU, memory, I/O,
 or disk stress on a POSIX-compliant operating system and reports any errors
 it detects.
 .
 'stress' is not a benchmark.  It is a tool used by system administrators to
 evaluate how well their systems will scale, by kernel programmers to evaluate
 perceived performance characteristics, and by systems programmers to expose
 the classes of bugs which only or more frequently manifest themselves when
 the system is under heavy load.
Homepage: http://people.seas.harvard.edu/~apw/stress

Package: libext2fs2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 349
Maintainer: Theodore Y. Ts'o <tytso@mit.edu>
Architecture: armhf
Multi-Arch: same
Source: e2fsprogs
Version: 1.44.5-1~bpo9+1
Replaces: e2fslibs (<< 1.43.9-1~)
Provides: e2fslibs (= 1.44.5-1~bpo9+1)
Depends: libc6 (>= 2.17)
Breaks: e2fslibs (<< 1.43.9-1~)
Description: ext2/ext3/ext4 file system libraries
 The ext2, ext3 and ext4 file systems are successors of the original ext
 ("extended") file system. They are the main file system types used for
 hard disks on Debian and other Linux systems.
 .
 This package provides the ext2fs and e2p libraries, for userspace software
 that directly accesses extended file systems. Programs that use libext2fs
 include e2fsck, mke2fs, and tune2fs. Programs that use libe2p include
 dumpe2fs, chattr, and lsattr.
Homepage: http://e2fsprogs.sourceforge.net

Package: ca-certificates
Status: install ok installed
Priority: optional
Section: misc
Installed-Size: 434
Maintainer: Michael Shuler <michael@pbandjelly.org>
Architecture: all
Multi-Arch: foreign
Version: 20161130+nmu1+deb9u1
Depends: openssl (>= 1.0.0), debconf (>= 0.5) | debconf-2.0
Breaks: ca-certificates-java (<< 20121112+nmu1)
Enhances: openssl
Description: Common CA certificates
 Contains the certificate authorities shipped with Mozilla's browser to allow
 SSL-based applications to check for the authenticity of SSL connections.
 .
 Please note that Debian can neither confirm nor deny whether the
 certificate authorities whose certificates are included in this package
 have in any way been audited for trustworthiness or RFC 3647 compliance.
 Full responsibility to assess them belongs to the local system
 administrator.

Package: libacl1
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 49
Maintainer: Anibal Monsalve Salazar <anibal@debian.org>
Architecture: armhf
Multi-Arch: same
Source: acl (2.2.52-3)
Version: 2.2.52-3+b1
Depends: libattr1 (>= 1:2.4.46-8), libc6 (>= 2.4)
Conflicts: acl (<< 2.0.0), libacl1-kerberos4kth
Description: Access control list shared library
 This package contains the libacl.so dynamic library containing
 the POSIX 1003.1e draft standard 17 functions for manipulating
 access control lists.
Homepage: http://savannah.nongnu.org/projects/acl/

Package: ncurses-bin
Essential: yes
Status: install ok installed
Priority: required
Section: utils
Installed-Size: 481
Maintainer: Craig Small <csmall@debian.org>
Architecture: armhf
Multi-Arch: foreign
Source: ncurses
Version: 6.0+20161126-1+deb9u2
Pre-Depends: libc6 (>= 2.4), libtinfo5 (>= 6.0+20151017), libtinfo5 (<< 6.1~)
Description: terminal-related programs and man pages
 The ncurses library routines are a terminal-independent method of
 updating character screens with reasonable optimization.
 .
 This package contains the programs used for manipulating the terminfo
 database and individual terminfo entries, as well as some programs for
 resetting terminals and such.
Homepage: http://invisible-island.net/ncurses/

Package: libmnl0
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 38
Maintainer: Anibal Monsalve Salazar <anibal@debian.org>
Architecture: armhf
Multi-Arch: same
Source: libmnl
Version: 1.0.4-2
Depends: libc6 (>= 2.4)
Description: minimalistic Netlink communication library
 libmnl is a minimalistic user-space library oriented to Netlink developers.
 There are a lot of common tasks in parsing, validating, constructing of
 both the Netlink header and TLVs that are repetitive and easy to get wrong.
 This library aims to provide simple helpers that allows you to re-use code
 and to avoid re-inventing the wheel.
 .
 The main features of this library are:
 .
 Small: the shared library requires around 30KB for an x86-based computer.
 .
 Simple: this library avoids complexity and elaborated abstractions that
 tend to hide Netlink details.
 .
 Easy to use: the library simplifies the work for Netlink-wise developers.
 It provides functions to make socket handling, message building,
 validating, parsing and sequence tracking, easier.
 .
 Easy to re-use: you can use the library to build your own abstraction
 layer on top of this library.
 .
 Decoupling: the interdependency of the main bricks that compose the
 library is reduced, i.e. the library provides many helpers, but the
 programmer is not forced to use them.
 .
 This package contains the shared libraries needed to run programs that use
 the minimalistic Netlink communication library.
Homepage: http://netfilter.org/projects/libmnl/

Package: sg3-utils-udev
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 56
Maintainer: Ritesh Raj Sarraf <rrs@debian.org>
Architecture: all
Source: sg3-utils
Version: 1.42-2
Depends: sg3-utils, initramfs-tools
Description: utilities for devices using the SCSI command set (udev rules)
 Most OSes have SCSI pass-through interfaces that enable user space programs
 to send SCSI commands to a device and fetch the response. With SCSI to ATA
 Translation (SAT) many ATA disks now can process SCSI commands. Typically
 each utility in this package implements one SCSI command. See the draft
 standards at www.t10.org for SCSI command definitions plus SAT. ATA
 commands are defined in the draft standards at www.t13.org . For a mapping
 between supported SCSI and ATA commands and utility names in this package
 see the COVERAGE file.
 .
 udev rules which are associated with the utilities in the sg3-utils package.
Homepage: http://sg.danny.cz/sg/

Package: libsepol1
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 417
Maintainer: Debian SELinux maintainers <selinux-devel@lists.alioth.debian.org>
Architecture: armhf
Multi-Arch: same
Source: libsepol
Version: 2.6-2
Depends: libc6 (>= 2.8)
Description: SELinux library for manipulating binary security policies
 Security-enhanced Linux is a patch of the Linux kernel and a number
 of utilities with enhanced security functionality designed to add
 mandatory access controls to Linux.  The Security-enhanced Linux
 kernel contains new architectural components originally developed to
 improve the security of the Flask operating system. These
 architectural components provide general support for the enforcement
 of many kinds of mandatory access control policies, including those
 based on the concepts of Type Enforcement®, Role-based Access
 Control, and Multi-level Security.
 .
 libsepol provides an API for the manipulation of SELinux binary policies.
 It is used by checkpolicy (the policy compiler) and similar tools, as well
 as by programs like load_policy that need to perform specific transformations
 on binary policies such as customizing policy boolean settings.
Homepage: http://userspace.selinuxproject.org/

Package: python-future
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 1710
Maintainer: Debian Python Modules Team <python-modules-team@lists.alioth.debian.org>
Architecture: all
Version: 0.15.2-4
Depends: python:any (<< 2.8), python:any (>= 2.7.5-5~), python-configparser
Suggests: python-future-doc
Description: single-source support for Python 3 and 2 - Python 2.x
 Future is the missing compatibility layer between Python 2 and Python 3. It
 allows one to use a single, clean Python 3.x-compatible codebase to support
 both Python 2 and Python 3 with minimal overhead.
 .
 The imports have no effect on Python 3. On Python 2, they shadow the
 corresponding builtins, which normally have different semantics on Python 3
 versus 2, to provide their Python 3 semantics.
 .
 This package contains the Python 2.x module.
Homepage: https://python-future.org

Package: libpython2.7-stdlib
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 7921
Maintainer: Matthias Klose <doko@debian.org>
Architecture: armhf
Multi-Arch: same
Source: python2.7
Version: 2.7.13-2+deb9u3
Replaces: python2.7 (<< 2.7.5-0~)
Provides: python-argparse, python2.7-argparse, python2.7-celementtree, python2.7-cjkcodecs, python2.7-ctypes, python2.7-elementtree, python2.7-profiler, python2.7-wsgiref
Depends: libpython2.7-minimal (= 2.7.13-2+deb9u3), mime-support, libbz2-1.0, libc6 (>= 2.15), libdb5.3, libexpat1 (>= 2.1~beta3), libffi6 (>= 3.0.4), libncursesw5 (>= 6), libreadline7 (>= 7.0~beta), libsqlite3-0 (>= 3.5.9), libssl1.1 (>= 1.1.0), libtinfo5 (>= 6)
Breaks: python-urllib3 (<< 1.9.1-3)
Description: Interactive high-level object-oriented language (standard library, version 2.7)
 Python is a high-level, interactive, object-oriented language. Its 2.7 version
 includes an extensive class library with lots of goodies for
 network programming, system administration, sounds and graphics.
 .
 This package contains Python 2.7's standard library. It is normally not
 used on its own, but as a dependency of python2.7.

Package: python
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 648
Maintainer: Matthias Klose <doko@debian.org>
Architecture: armhf
Multi-Arch: allowed
Source: python-defaults
Version: 2.7.13-2
Replaces: python-dev (<< 2.6.5-2)
Provides: python-ctypes, python-email, python-importlib, python-profiler, python-wsgiref
Depends: python2.7 (>= 2.7.13-1~), libpython-stdlib (= 2.7.13-2)
Pre-Depends: python-minimal (= 2.7.13-2)
Suggests: python-doc (= 2.7.13-2), python-tk (>= 2.7.13-1~)
Breaks: update-manager-core (<< 0.200.5-2)
Conflicts: python-central (<< 0.5.5)
Description: interactive high-level object-oriented language (default version)
 Python, the high-level, interactive object oriented language,
 includes an extensive class library with lots of goodies for
 network programming, system administration, sounds and graphics.
 .
 This package is a dependency package, which depends on Debian's default
 Python version (currently v2.7).
Homepage: http://www.python.org/

Package: libidn11
Status: install ok installed
Priority: standard
Section: libs
Installed-Size: 289
Maintainer: Debian Libidn Team <help-libidn@gnu.org>
Architecture: armhf
Multi-Arch: same
Source: libidn
Version: 1.33-1
Replaces: libidn11-dev
Depends: libc6 (>= 2.4)
Conflicts: libidn9-dev
Description: GNU Libidn library, implementation of IETF IDN specifications
 GNU Libidn is a fully documented implementation of the Stringprep,
 Punycode and IDNA specifications.  Libidn's purpose is to encode and
 decode internationalized domain names.  The Nameprep, XMPP, SASLprep,
 and iSCSI profiles are supported.
 .
 This package contains the shared library.
Homepage: https://www.gnu.org/software/libidn/

Package: libdbus-1-3
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 323
Maintainer: Utopia Maintenance Team <pkg-utopia-maintainers@lists.alioth.debian.org>
Architecture: armhf
Multi-Arch: same
Source: dbus
Version: 1.10.26-0+deb9u1
Depends: libc6 (>= 2.17), libsystemd0 (>= 209)
Recommends: dbus
Breaks: dbus (<< 1.9.16-1~)
Description: simple interprocess messaging system (library)
 D-Bus is a message bus, used for sending messages between applications.
 Conceptually, it fits somewhere in between raw sockets and CORBA in
 terms of complexity.
 .
 D-Bus supports broadcast messages, asynchronous messages (thus
 decreasing latency), authentication, and more. It is designed to be
 low-overhead; messages are sent using a binary protocol, not using
 XML. D-Bus also supports a method call mapping for its messages, but
 it is not required; this makes using the system quite simple.
 .
 It comes with several bindings, including GLib, Python, Qt and Java.
 .
 The daemon can be found in the dbus package.
Homepage: http://dbus.freedesktop.org/

Package: libboost-system1.62.0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 55
Maintainer: Debian Boost Team <pkg-boost-devel@lists.alioth.debian.org>
Architecture: armhf
Multi-Arch: same
Source: boost1.62
Version: 1.62.0+dfsg-4
Depends: libc6 (>= 2.4), libgcc1 (>= 1:3.5), libstdc++6 (>= 5.2)
Description: Operating system (e.g. diagnostics support) library
 This package forms part of the Boost C++ Libraries collection.
 .
 The Boost System library provides simple, light-weight error_code
 objects that encapsulate system-specific error code values, yet also
 provide access to more abstract and portable error conditions via
 error_condition objects. Because error_code objects can represent
 errors from sources other than the operating system, including
 user-defined sources, each error_code and error_condition has an
 associated error_category.
Homepage: http://www.boost.org/libs/system/

Package: libgcc1
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 149
Maintainer: Debian GCC Maintainers <debian-gcc@lists.debian.org>
Architecture: armhf
Multi-Arch: same
Source: gcc-6 (6.3.0-18+deb9u1)
Version: 1:6.3.0-18+deb9u1
Provides: libgcc1-armhf
Depends: gcc-6-base (= 6.3.0-18+deb9u1), libc6 (>= 2.4)
Breaks: gcc-4.3 (<< 4.3.6-1), gcc-4.4 (<< 4.4.6-4), gcc-4.5 (<< 4.5.3-2)
Description: GCC support library
 Shared version of the support library, a library of internal subroutines
 that GCC uses to overcome shortcomings of particular machines, or
 special needs for some languages.
Homepage: http://gcc.gnu.org/

Package: f2fs-tools
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 318
Maintainer: Filesystems Group <filesystems-devel@lists.alioth.debian.org>
Architecture: armhf
Version: 1.11.0-1~bpo9+1
Depends: libf2fs5 (= 1.11.0-1~bpo9+1), libf2fs-format4 (= 1.11.0-1~bpo9+1), libblkid1 (>= 2.17.2), libc6 (>= 2.10), libselinux1 (>= 2.0.65), libuuid1 (>= 2.16)
Description: Tools for Flash-Friendly File System
 F2FS is a new filesystem for Linux aimed at NAND flash memory-based storage
 devices, such as SSD, eMMC, and SD cards. It is based on Log-structured File
 System (LFS).
Homepage: http://git.kernel.org/cgit/linux/kernel/git/jaegeuk/f2fs-tools.git

Package: util-linux
Essential: yes
Status: install ok installed
Priority: required
Section: utils
Installed-Size: 2620
Maintainer: Debian util-linux Maintainers <ah-util-linux@debian.org>
Architecture: armhf
Multi-Arch: foreign
Version: 2.29.2-1+deb9u1
Replaces: bash-completion (<< 1:2.1-4.1~), initscripts (<< 2.88dsf-59.2~), mount (= 2.26.2-3), mount (= 2.26.2-3ubuntu1), sysvinit-utils (<< 2.88dsf-59.1~)
Pre-Depends: libblkid1 (>= 2.25), libc6 (>= 2.15), libfdisk1 (>= 2.29~rc2), libmount1 (>= 2.25), libncursesw5 (>= 6), libpam0g (>= 0.99.7.1), libselinux1 (>= 2.6-3~), libsmartcols1 (>= 2.28~rc1), libsystemd0, libtinfo5 (>= 6), libudev1 (>= 183), libuuid1 (>= 2.16), zlib1g (>= 1:1.1.4)
Suggests: dosfstools, kbd | console-tools, util-linux-locales
Breaks: bash-completion (<< 1:2.1-4.1~), cloud-utils (<< 0.27-1~), grml-debootstrap (<< 0.68), mount (= 2.26.2-3), mount (= 2.26.2-3ubuntu1), sysvinit-utils (<< 2.88dsf-59.4~)
Conffiles:
 /etc/default/hwclock 3916544450533eca69131f894db0ca12
 /etc/init.d/hwclock.sh 1ca5c0743fa797ffa364db95bb8d8d8e
 /etc/pam.d/runuser b8b44b045259525e0fae9e38fdb2aeeb
 /etc/pam.d/runuser-l 2106ea05877e8913f34b2c77fa02be45
Description: miscellaneous system utilities
 This package contains a number of important utilities, most of which
 are oriented towards maintenance of your system. Some of the more
 important utilities included in this package allow you to partition
 your hard disk, view kernel messages, and create new filesystems.

Package: libustr-1.0-1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 150
Maintainer: Vaclav Ovsik <vaclav.ovsik@i.cz>
Architecture: armhf
Multi-Arch: same
Source: ustr
Version: 1.0.4-6
Depends: libc6 (>= 2.4)
Description: Micro string library: shared library
 ustr (Micro string library) is a string API for C. It has tiny overhead over
 just plain strdup(), is much safer, is easier to use, is faster for many
 operations, can be used with read-only or automatically allocated data. You
 don't even need to link to the library to use it (so there are no
 dependencies).
 .
 This package contains the shared library.
Homepage: http://www.and.org/ustr/

Package: liblzo2-2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 110
Maintainer: Peter Eisentraut <petere@debian.org>
Architecture: armhf
Multi-Arch: same
Source: lzo2 (2.08-1.2)
Version: 2.08-1.2+b2
Depends: libc6 (>= 2.4)
Description: data compression library
 LZO is a portable, lossless data compression library.
 It offers pretty fast compression and very fast decompression.
 Decompression requires no memory.  In addition there are slower
 compression levels achieving a quite competitive compression ratio
 while still decompressing at this very high speed.
Homepage: http://www.oberhumer.com/opensource/lzo/

Package: python2.7-minimal
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 2650
Maintainer: Matthias Klose <doko@debian.org>
Architecture: armhf
Multi-Arch: allowed
Source: python2.7
Version: 2.7.13-2+deb9u3
Replaces: python2.7 (<< 2.7.8-7~)
Depends: libpython2.7-minimal (= 2.7.13-2+deb9u3), zlib1g (>= 1:1.2.0)
Pre-Depends: libc6 (>= 2.15)
Recommends: python2.7
Suggests: binfmt-support
Conflicts: binfmt-support (<< 1.1.2)
Description: Minimal subset of the Python language (version 2.7)
 This package contains the interpreter and some essential modules.  It can
 be used in the boot process for some basic tasks.
 See /usr/share/doc/python2.7-minimal/README.Debian for a list of the modules
 contained in this package.

Package: libwrap0
Status: install ok installed
Priority: standard
Section: libs
Installed-Size: 91
Maintainer: Marco d'Itri <md@linux.it>
Architecture: armhf
Multi-Arch: same
Source: tcp-wrappers
Version: 7.6.q-26
Replaces: tcpd (<< 7.6.q-20)
Depends: libc6 (>= 2.11)
Recommends: tcpd
Breaks: tcpd (<< 7.6.q-20)
Description: Wietse Venema's TCP wrappers library
 Wietse Venema's network logger, also known as TCPD or LOG_TCP.
 .
 These programs log the client host name of incoming telnet,
 ftp, rsh, rlogin, finger etc. requests.
 .
 Security options are:
  - access control per host, domain and/or service;
  - detection of host name spoofing or host address spoofing;
  - booby traps to implement an early-warning system.

Package: rpcbind
Status: install ok installed
Priority: standard
Section: net
Installed-Size: 122
Maintainer: Anibal Monsalve Salazar <anibal@debian.org>
Architecture: armhf
Version: 0.2.3-0.6
Replaces: libc-bin (<< 2.16)
Provides: portmap
Depends: libc6 (>= 2.16), libsystemd0, libtirpc1 (>= 0.2.5-1.2~), libwrap0 (>= 7.6-4~), init-system-helpers (>= 1.18~), lsb-base (>= 4.1+Debian3)
Breaks: libc-bin (<< 2.16)
Conflicts: portmap
Conffiles:
 /etc/init.d/rpcbind 1bdc8424f2b670ab0ab21b64ec128f88
 /etc/init/portmap-wait.conf 5999af4cc5813b66456cfaa2ec373493
 /etc/init/rpcbind-boot.conf 495c4e8f26ba22aa0ae37b92e8da8b04
 /etc/init/rpcbind.conf bb52b27502ec80ca5b03e4dee10cd31e
 /etc/insserv.conf.d/rpcbind 669a5c3a6ffa8b5b5ce263057934d118
Description: converts RPC program numbers into universal addresses
 The rpcbind utility is a server that converts RPC program numbers
 into universal addresses.
Homepage: http://sourceforge.net/projects/rpcbind/

Package: sed
Essential: yes
Status: install ok installed
Priority: required
Section: utils
Installed-Size: 762
Maintainer: Clint Adams <clint@debian.org>
Architecture: armhf
Multi-Arch: foreign
Version: 4.4-1
Pre-Depends: libc6 (>= 2.7), libselinux1 (>= 1.32)
Description: GNU stream editor for filtering/transforming text
 sed reads the specified files or the standard input if no
 files are specified, makes editing changes according to a
 list of commands, and writes the results to the standard
 output.
Homepage: https://www.gnu.org/software/sed/

Package: libf2fs5
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 34
Maintainer: Filesystems Group <filesystems-devel@lists.alioth.debian.org>
Architecture: armhf
Multi-Arch: same
Source: f2fs-tools
Version: 1.11.0-1~bpo9+1
Depends: libc6 (>= 2.7)
Description: Core library for Flash-Friendly File System
 F2FS is a new filesystem for Linux aimed at NAND flash memory-based storage
 devices, such as SSD, eMMC, and SD cards. It is based on Log-structured File
 System (LFS).
 .
 This package contains the core f2fs library.
Homepage: http://git.kernel.org/cgit/linux/kernel/git/jaegeuk/f2fs-tools.git

Package: libsmartcols1
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 191
Maintainer: Debian util-linux Maintainers <ah-util-linux@debian.org>
Architecture: armhf
Multi-Arch: same
Source: util-linux
Version: 2.29.2-1+deb9u1
Depends: libc6 (>= 2.17)
Description: smart column output alignment library
 This smart column output alignment library is used by fdisk utilities.

Package: libcryptsetup4
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 163
Maintainer: Debian Cryptsetup Team <pkg-cryptsetup-devel@lists.alioth.debian.org>
Architecture: armhf
Multi-Arch: same
Source: cryptsetup
Version: 2:1.7.3-4
Depends: libc6 (>= 2.17), libdevmapper1.02.1 (>= 2:1.02.97), libgcrypt20 (>= 1.7.0), libuuid1 (>= 2.16), libgpg-error0 (>= 1.10-0.1)
Description: disk encryption support - shared library
 Cryptsetup provides an interface for configuring encryption on block
 devices (such as /home or swap partitions), using the Linux kernel
 device mapper target dm-crypt. It features integrated Linux Unified Key
 Setup (LUKS) support.
 .
 This package provides the libcryptsetup shared library.
Homepage: https://gitlab.com/cryptsetup/cryptsetup

Package: netbase
Status: install ok installed
Priority: important
Section: admin
Installed-Size: 44
Maintainer: Marco d'Itri <md@linux.it>
Architecture: all
Multi-Arch: foreign
Version: 5.4
Conffiles:
 /etc/protocols bb9c019d6524e913fd72441d58b68216
 /etc/rpc f0b6f6352bf886623adc04183120f83b
 /etc/services 567c100888518c1163b3462993de7d47
Description: Basic TCP/IP networking system
 This package provides the necessary infrastructure for basic TCP/IP based
 networking.

